Latest activity
-
Ddekiesel posted the thread [SOLVED] Does verify "read" the whole data every time? in Proxmox Backup: Installation and configuration.I am considering using cold storage storage s3 for my backups since storing data is much cheaper, but: When a verify runs, does it read the whole backup every time? Or just a certain percentage? Reading from cold storage is much more...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Yes and yes. The error is for SATAPool which is not and never has been on Node2 Node2 only had SASPool with the 12 SAS and rpool with two nVme PVE only has SATAPool with 10 Sata drives and rpoop with two nVme which are identical to the two on...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.I am completely confused. If the drives that host saspool are NOT PRESENT, then its a foregone conclusion that a defined store looking for the filesystem is going to error... what are you asking? lets start over. do you have the drives...
-
Aawirthy replied to the thread SSD ZFS Pool keeps increasing in usage space.How is this related to the space being used up on my ZFS pools?
-
bbgeek17 reacted to Johannes S's post in the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice? with
Like.
Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the... -
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.All I did was build the pool, and then shut down. Amaon finally got me the parts I needed to gt the build done yesterday and 8 of my SAS drives were not showing when I went to add the pool so I unplugged one at a time until I found the 4 that...
-
Aalexskysilk replied to the thread ZFS - How do I stop resilvering a degraded drive and replace it with a cold spare?.dont worry about attaching/detaching it. simply remove and replace it. edit- DONT PULL IT YET. there's a resilver in progress; even though the disk is bad, the vdev partner is not in a "complete" state. let it finish resilver, and THEN replace...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.so I assume you have a data store defined looking for saspool... remember to delete that too.
-
GGMBauer replied to the thread Fehler No Hard Disk found! bei der Installation.Das möchte ich unterstreichen. Diese verlinkte Anleitung auf Youtube ist ja wirklicher Unsinn... Ja, ich verzweifle wirklich. Können junge Menschen geschriebenes nicht mehr verstehen, dass man sich alles nur noch von irgendwelchen Dumpfnasen...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Node2 : root@node2:~# zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT rpool 3.62T 2.59G 3.62T - - 0% 0% 1.00x ONLINE - root@node2:~# zpool import no pools available...
-
JJohannes S replied to the thread Question about Feature Replication.PBS has also a live-restore feature so you can start the VM without waiting for a completion of the restore.
-
JJust restore the VM of your choice on the other node. The storage type on the other node does not have to be the same as it was on the source. The result is basically a "replicated" VM from/to different filesystems ;-) The are CLI tools...
-
JJohannes S reacted to ThoSo's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
Prüfen : Im BIOS/UEFI wird die SSD sauber angezeigt? kleines Kochrezept für die Installation Ventoy von ventoy.net herunterladen, auspacken und auf dem USB Stick installieren. Das Proxmox VE ISO in das Hauptverzeichnis des Sticks kopieren, evtl...
-
JJohannes S reacted to omavoss's post in the thread Fehler No Hard Disk found! bei der Installation with Like.
@charly88888 : Lass Dich bitte nicht entmutigen, von wegen "Schrott"! Als kleiner stromsparender MiniPC ist der NUC sehr wohl als Server zu gebrauchen. Natürlich nicht für professionelle Anwender mit mehreren Hundert LXC, aber für ein HomeLab...
-
JJohannes S reacted to alexskysilk's post in the thread Evaluating ProxMox and failing on UEFI with Like.
the likely culprit is a pre-existing filesystem on your local drive. The installer is usually pretty good at dealing with it, but in your case clearly it isnt. use a linux livecd like https://gparted.org/download.php and completely wipe the...
-
Ttricorax replied to the thread [SOLVED] Nach Aktivierung SR-IOV (NIC) ist die PVE GUI nicht erreich- & pingbar.Das ist korrekt, da ich die SFP+-Ports der NiC nur nutzen kann, wenn der Tiny im Serverrack verbaut ist. Da ich derzeit nicht per SSH oder GUI draufkomme kann ich nur die integrierte i219 für das Netzwerk nutzen, da er für die direkte...
-
Aalexskysilk replied to the thread SAS pool on one node, SATA pool on the other.what does zpool list and zpool import show?
-
Aalexskysilk replied to the thread Evaluating ProxMox and failing on UEFI.the likely culprit is a pre-existing filesystem on your local drive. The installer is usually pretty good at dealing with it, but in your case clearly it isnt. use a linux livecd like https://gparted.org/download.php and completely wipe the...
-
Aalexskysilk reacted to Johannes S's post in the thread LVM vs LVM-Thin on Shared Fibre Channel LUN (3-Node Cluster) – Best Practice? with Like.
Yes, lvm/thin is not cluster-aware so you will risk a loss of data. It's not supported for a reason, see also the table on https://pve.proxmox.com/wiki/Storage which clearly states that lvm/thin is NOT a shared storage. No for exactly the...
-
Kkarlm replied to the thread SAS pool on one node, SATA pool on the other.Feb 19 13:56:21 node2 pvestatd[1638]: could not activate storage 'SataPool', zfs error: cannot import 'SATAPool': no such pool available Feb 19 13:56:31 node2 pvestatd[1638]: zfs error: cannot open 'SATAPool': no such pool I meant Node1...