I tried using Cascadelake-Server-noTSX when I was on 9.1.x and didn't see any different then.
But I tried on 8.4.16 with Cascadelake-Server-noTSX and x86-64-v2-AES but don't see any different.
There is almost no usage on the VMs if I look in...
Has it been fixed already?
The following content is included in today's update:
https://github.com/proxmox/pve-kernel/commits/master/
https://bugs.launchpad.net/ubuntu/+source/linux/6.17.0-16.16
* [SRU] add pmc c6 support of Arrow Lake (LP...
I mean that i remove manually the backup on the PBS which have the verify state failed, this night the backup was succeed from the pve:
103: 2026-02-17 22:53:33 INFO: 99% (1.5 TiB of 1.5 TiB) in 1h 53m 30s, read: 138.1 MiB/s, write: 3.0 MiB/s...
fixed it!
just had to add root:1000:1 to /etc/subgid and /etc/subuid, without editing what was already there.
So recap:
*Make a user inside an LXC
*Make the same user on the pve host
*Make them both both uid1000 and gui1000 or any other free...
Hey,
what you could do is pass the USB port through to a VM directly, so the OMV is completely in control of the disks. Just keep in mind that if you want VM backups to also include the data on the disks you will have to first add them as a...
Hi all,
I'm a bit confused on what direction I should go, hoping you can help. In VMware I have a NIC that acts as trunk and has full access to all VLANs (NIC4). NIC4 is then split into multiple port groups to give different VLAN accesses and...
Adding
abi <abi/3.0>,
profile system_tor flags=(attach_disconnected) {
....
to the beginning of /etc/apparmor.d/system_tor and running systemctl reload-or-restart apparmor.service seems to fix the issue for tor too :)
Here you go Nico - any help you can give will be greatly appreciated!
root@host5:~# ip -4 route
default via 172.16.20.126 dev vmbr0 proto kernel onlink
172.16.20.0/25 dev vmbr0 proto kernel scope link src 172.16.20.55
192.168.35.0/24 dev vmbr1...
Thank you both for your responses. Good to hear the bug is already registered and someone is working on a bugfix.
I'll leave this thread open until the bugfix is released.
Hi All,
I read lot of threads regarding adding a vlan in proxmox and honestly i am pretty confused.
What i want to achieve is trunk my physical NICs on the node to a cisco switch (etherchannel),
This switch has a gateway trunk to a cisco router...
Thank you both for your responses. Good to hear the bug is already registered and someone is working on a bugfix.
I'll leave this thread open until the bugfix is released.
I'm afraid I give up ;-(.
On Saturday I asked you:
1) Just in case, execute in the PVE hosts: [ hosts in PLURAL form]
grep -rF 192.168. /etc
and search for any leftovers of the old addressing.
But you showed the result only from ONE...
I've just completed transition from 2x10G (LACP) to 25G mesh.
25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
No, migrating between nodes and back should work. For the resetup migrating the guests off the node, removing it from the cluster and reinstalling is propably the best course of action...
I've just completed transition from 2x10G (LACP) to 25G mesh.
25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
Hey,
what you could do is pass the USB port through to a VM directly, so the OMV is completely in control of the disks. Just keep in mind that if you want VM backups to also include the data on the disks you will have to first add them as a...