Latest activity
-
BBrethsteallar reacted to k12nate's post in the thread What method should I use for promiscuous mode for on prem AP controller VM with
Like.
Hi all, I'm a bit confused on what direction I should go, hoping you can help. In VMware I have a NIC that acts as trunk and has full access to all VLANs (NIC4). NIC4 is then split into multiple port groups to give different VLAN accesses and... -
MAdding abi <abi/3.0>, profile system_tor flags=(attach_disconnected) { .... to the beginning of /etc/apparmor.d/system_tor and running systemctl reload-or-restart apparmor.service seems to fix the issue for tor too :)
-
BBrethsteallar reacted to PaulR1's post in the thread PVE networking freezes when adding IP address to vmbr1 with Like.
Here you go Nico - any help you can give will be greatly appreciated! root@host5:~# ip -4 route default via 172.16.20.126 dev vmbr0 proto kernel onlink 172.16.20.0/25 dev vmbr0 proto kernel scope link src 172.16.20.55 192.168.35.0/24 dev vmbr1...
-
BBrethsteallar reacted to TotalControl's post in the thread Renew Certificate task hangs (acme-renew-cert) after update to proxmox-backup-server 4.1.2-1 (AcmeApiConfig is not initialized) with Like.
Thank you both for your responses. Good to hear the bug is already registered and someone is working on a bugfix. I'll leave this thread open until the bugfix is released.
-
BHi All, I read lot of threads regarding adding a vlan in proxmox and honestly i am pretty confused. What i want to achieve is trunk my physical NICs on the node to a cisco switch (etherchannel), This switch has a gateway trunk to a cisco router...
-
BBrethsteallar reacted to Dragoon's post in the thread Hmm, after upgrade no firewall or HTML5 with Like.
Make sure your using the correct repo as well. https://pve.proxmox.com/wiki/Package_repositories
-
TTotalControl replied to the thread Renew Certificate task hangs (acme-renew-cert) after update to proxmox-backup-server 4.1.2-1 (AcmeApiConfig is not initialized).Thank you both for your responses. Good to hear the bug is already registered and someone is working on a bugfix. I'll leave this thread open until the bugfix is released.
-
BBrethsteallar reacted to Rafael Visser's post in the thread Network problems when idle vm is idle with Like.
Hi Mr. Holmes You pointed to the right direction, bad configuration on routing. Congestion on Layer 8... Sorry and many thanks
-
BBrethsteallar reacted to Onslow's post in the thread VM connection issues after subnet change. What am I missing? Real time problem. with Like.
I'm afraid I give up ;-(. On Saturday I asked you: 1) Just in case, execute in the PVE hosts: [ hosts in PLURAL form] grep -rF 192.168. /etc and search for any leftovers of the old addressing. But you showed the result only from ONE...
-
JJohannes S reacted to Nexces's post in the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad with Like.
I've just completed transition from 2x10G (LACP) to 25G mesh. 25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
-
JJohannes S replied to the thread Live migration from LVM to LVM thin without dataloss?.No, migrating between nodes and back should work. For the resetup migrating the guests off the node, removing it from the cluster and reinstalling is propably the best course of action...
-
NNexces replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.I've just completed transition from 2x10G (LACP) to 25G mesh. 25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
-
Hannes Laimer replied to the thread Promox, OMV and USB disk enclosure - how to set-up.Hey, what you could do is pass the USB port through to a VM directly, so the OMV is completely in control of the disks. Just keep in mind that if you want VM backups to also include the data on the disks you will have to first add them as a... -
Aavidee reacted to drevilish's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
You can't yet, SMB module isn't packaged with Proxmox's Ceph Tentacle but Ceph Dashboard package expects it.
-
Uuzumo replied to the thread GPU Passthrough without Audio.Applying the update available for Test on 2026/02/18 will resolve the issue. Previously, HDMI Audio was not recognized, but applying the update without changing any settings resolved the issue. I tried playing the video and confirmed that sound...
-
-
Uuzumo replied to the thread No audio hdmi GPU PassThrought intel n100 arch linux.Applying the update available for Test on 2026/02/18 will resolve the issue. HDMI Audio was unavailable on N100 Windows 11, but applying the update confirmed improvement. * Linux has not been tested, but it should be fixed.
-
Ssohelranakhan83 posted the thread clock skew detected on mon.pven01 in Proxmox VE: Installation and configuration.clock skew detected on mon.pven01
-
MMEpke replied to the thread Proxmox help please.Hey! Thanks for the reply. I wanted to learn clustering if I don’t build a server. That’s one reason. I want plenty of resources to tackle whatever projects I may have in the future. I was looking at dual epic 7532 processors. 32 core each...
-
RRyanmh123 replied to the thread kernel panic when creating VMs (centos 9 stream ISO).This is still a relevant fix. I had the same issue with CentOS Stream 10 (downloaded a few days ago) and PVE 9.1.4 and this fixed it immediately
-
RRyanmh123 reacted to Robson Rissato's post in the thread kernel panic when creating VMs (centos 9 stream ISO) with Like.
does not work if configured like this centos 9 stream but that's how it works I believe that the problem is in the default( kvm64) of the proxmox
