Latest activity
-
Jjonnybravos123 replied to the thread Custom Auto install proxmox with zfs and offline packages.My autoinstall creates local-lvm storage on the nvme drive. That is where proxmox is installed. Then it does zfs setup after every package is installed,users setup, ui enabled etc. Apparently this was the only way to setup both. [global]...
-
Ttabita reacted to nico1875p's post in the thread Proxmox / OPNsense / 3 NICs : How to make VLAN aware LAN network to join physical devices to virtualized firewall? with
Like.
Since it works with pfSense, your Proxmox VLAN-aware bridge and trunk configuration are most likely correct. On OPNsense, I’ve seen cases where traffic reaches the interface (visible in tcpdump), but you still get no reply, even with an “allow... -
Nnico1875p replied to the thread [solved] Help needed with trunked vlans.Glad it helped !!! Good to hear everything is working now.
-
Nnico1875p reacted to Neuer_User's post in the thread [solved] Help needed with trunked vlans with Like.
Hi Nico Thanks a lot for your help. Indeed, your solution works. I have changed the networks now accordingly and everything works. :)
-
ghusson replied to the thread Custom Auto install proxmox with zfs and offline packages.If I understand well, you do not use Proxmox Automated installation ? What do you use for installation automation ? -
G_gabriel reacted to Onslow's post in the thread VM connection issues after subnet change. What am I missing? Real time problem. with Like.
No. The gateway is not visible from the PVE GUI, AFAIR. The own address 192.166.3.118/24 (see SIX) is in other network than the gateway 192.168.3.1 (see EIGHT). No wonder it can't access other networks.
-
Jjonnybravos123 replied to the thread Custom Auto install proxmox with zfs and offline packages.How do you install zfs raidz10 ? I need to install proxmox on nvme01 which I have done. Then I have an post install script downloading everything but I cant make zfs work. Or I made it work before but not in consistent way when I run my script...
-
IDifferent forms of this issue have been brought up a couple times in the past: https://forum.proxmox.com/threads/windows-optimize-drives-ram-usage-best-practices.144703/...
-
Ggfngfn256 replied to the thread PVE-root is full.My above posted command (du -h -x -d1 /) with the -x option will skip directories on different file systems, as shown here. So no need to unmount anything.
-
IITT reacted to Winter0916's post in the thread Server 2022 defrag/trim pegging CPU and RAM with Like.
What is the stance of Proxmox staff on this issue? @aaron @dietmar @fabian @wbumiller
-
RRiderofDragons68 posted the thread Tiger VNCserver not detectable in Proxmox VE: Networking and Firewall.I have installed Tiger VNCserver on a KALI workstation. I can't connect to the server from my workstation. So I have checked the root shell on the proxmox server and does not see the vncserver port either. Here is why I am working on getting...
-
Ggctwnl replied to the thread What is correct way to install ... intel-microcode ?.I see. Thank you for both answers. I did the 8 to 9 upgrade and the conversion, but to get to a real v9 setup you need to change this by hand afterwards. Maybe this is a good addition for the instructions? Or did I miss something during the...
-
Ggctwnl reacted to t.lamprecht's post in the thread What is correct way to install ... intel-microcode ? with Like.
That actually is the case since Proxmox VE 9.0 for new installations using our official ISO image.
-
Ggctwnl reacted to t.lamprecht's post in the thread What is correct way to install ... intel-microcode ? with Like.
That would basically work, albeit it would be also better to enable the non-free-firmware repo also for the main and the security repo, not just the update one. As then, you ensure you get important updates faster and major updates go smoothly...
-
EErnst T. replied to the thread Strange patterns in resource graphs..Just something to think about. I observe similar patterns with my Docker LCX. However, in my case, it's completely explainable. Motioneye runs there alongside many other services. The darker the night, the less network data comes from the...
-
-
ProxmoxSecurityAdvisory replied to the thread Proxmox Mail Gateway - Security Advisories.Subject: PSA-2026-00005-1: Bypass of mail filters through confusion of the MIME Parser Advisory date: 2026-02-17 Packages: pmg-api, libmime-tools-perl Details: The parser initially processing e-mails for further analysis was set to not cause... -
RRick_W replied to the thread Separate PVE Boot Drive??.UdoB, Thanks for your response. I am using Enterprise Class drives in my current setup and happy to hear I don't need to spend a stupid amount of money for more drives. I am an IT Systems Engineer by profession and home hobby. PVE is the most...
-
NNeuer_User replied to the thread [solved] Help needed with trunked vlans.Hi Nico Thanks a lot for your help. Indeed, your solution works. I have changed the networks now accordingly and everything works. :)
-
NNeuer_User reacted to nico1875p's post in the thread [solved] Help needed with trunked vlans with Like.
Hello, eno1 (trunk) │ ┌───────────┼───────────┐ │ │ │ eno1.50 eno1.200 vmbr0 (vlan-aware) │ │ │ vmbr50 vmbr200 VM1 (trunk) │...
-
Jjtheisen replied to the thread HPE P816i-a SR Gen 10 - SCSI Resets and ZFS failures.Update: So i might have shot myself in the foot there by using the 2.1.38 driver As per the release notes of firmware version 8 for the P816i-a it is fully qualified with this driver and might not be a 100 % backwards compatbile. See...
