Latest activity
-
RRiderofDragons68 posted the thread Tiger VNCserver not detectable in Proxmox VE: Networking and Firewall.I have installed Tiger VNCserver on a KALI workstation. I can't connect to the server from my workstation. So I have checked the root shell on the proxmox server and does not see the vncserver port either. Here is why I am working on getting...
-
Ggctwnl replied to the thread What is correct way to install ... intel-microcode ?.I see. Thank you for both answers. I did the 8 to 9 upgrade and the conversion, but to get to a real v9 setup you need to change this by hand afterwards. Maybe this is a good addition for the instructions? Or did I miss something during the...
-
Ggctwnl reacted to t.lamprecht's post in the thread What is correct way to install ... intel-microcode ? with
Like.
That actually is the case since Proxmox VE 9.0 for new installations using our official ISO image. -
Ggctwnl reacted to t.lamprecht's post in the thread What is correct way to install ... intel-microcode ? with Like.
That would basically work, albeit it would be also better to enable the non-free-firmware repo also for the main and the security repo, not just the update one. As then, you ensure you get important updates faster and major updates go smoothly...
-
EErnst T. replied to the thread Strange patterns in resource graphs..Just something to think about. I observe similar patterns with my Docker LCX. However, in my case, it's completely explainable. Motioneye runs there alongside many other services. The darker the night, the less network data comes from the...
-
-
ProxmoxSecurityAdvisory replied to the thread Proxmox Mail Gateway - Security Advisories.Subject: PSA-2026-00005-1: Bypass of mail filters through confusion of the MIME Parser Advisory date: 2026-02-17 Packages: pmg-api, libmime-tools-perl Details: The parser initially processing e-mails for further analysis was set to not cause... -
RRick_W replied to the thread Separate PVE Boot Drive??.UdoB, Thanks for your response. I am using Enterprise Class drives in my current setup and happy to hear I don't need to spend a stupid amount of money for more drives. I am an IT Systems Engineer by profession and home hobby. PVE is the most...
-
NNeuer_User replied to the thread [solved] Help needed with trunked vlans.Hi Nico Thanks a lot for your help. Indeed, your solution works. I have changed the networks now accordingly and everything works. :)
-
NNeuer_User reacted to nico1875p's post in the thread [solved] Help needed with trunked vlans with Like.
Hello, eno1 (trunk) │ ┌───────────┼───────────┐ │ │ │ eno1.50 eno1.200 vmbr0 (vlan-aware) │ │ │ vmbr50 vmbr200 VM1 (trunk) │...
-
Jjtheisen replied to the thread HPE P816i-a SR Gen 10 - SCSI Resets and ZFS failures.Update: So i might have shot myself in the foot there by using the 2.1.38 driver As per the release notes of firmware version 8 for the P816i-a it is fully qualified with this driver and might not be a 100 % backwards compatbile. See...
-
Ddleidert replied to the thread Fehler: upload chunk to s3 backend - upload failed: unexpected status code 504 Gateway Timeout.Leider nein, wobei ich nur Syncs versucht habe. Da die nicht zuverlässig liefen, habe ich dann gar nicht erst darauf gesetzt, dass das der zentrale Backup-Server sein könnte. Schlimmer ist jedoch, dass die Verifizierung bei nahezu allen Backups...
-
MMelbourneNerd53 reacted to Chris's post in the thread proxmox-backup-client static on Ubuntu 18.04.6 with Like.
do you run the proxmox-backup-client as root or as a different user? Most likely the user the pbs client process is executed as does not have permissions to read these files. To exclude, you can use .pxarexclude files or specify them on command...
-
UdoB reacted to fleet-command's post in the thread [SOLVED] Stuck on 8.4.16 after trying to upgrade to 9.x with Like.
Found the issue, during my upgrade I mistakenly thought that I had migrated the Debian base repositories to the new format but no, ended just commenting them out :/ When I re-enabled the repositories in /etc/apt/sources.list and run apt update... -
Nnico1875p replied to the thread Proxmox / OPNsense / 3 NICs : How to make VLAN aware LAN network to join physical devices to virtualized firewall?.Since it works with pfSense, your Proxmox VLAN-aware bridge and trunk configuration are most likely correct. On OPNsense, I’ve seen cases where traffic reaches the interface (visible in tcpdump), but you still get no reply, even with an “allow...
-
Aandre-knx replied to the thread Fehler: upload chunk to s3 backend - upload failed: unexpected status code 504 Gateway Timeout.Hey, hattet ihr Erfolg mit der put-rate-limit Option und Hetzner? Ich habe es mit einem Wert von 10 und 5 versucht, beides ohne Erfolg. Kleinere VMs laufen ohne Probleme durch, aber Größere VMs oder wenn mehrere nacheinander durchlaufen, gibt es...
-
MMelbourneNerd53 replied to the thread proxmox-backup-client static on Ubuntu 18.04.6.I run it as root. After looking how to get more verbosity from the system I ran proxmox-backup-client with PBS_LOG=trace and found it is throwing this error while trying to back up files in /var/lib/lxcfs/ when I thought it was trying to access...
-
fiona replied to the thread [SOLVED] Parallel cloning.Hi @sesaravanan, if you're doing this many clones in parallel, the lock might be too heavily contended for every task to get the chance to get it. That said, there was a proposed patch to improve the situation. It's not applied yet, and it still... -
OOnslow replied to the thread PVE-root is full.I guess there are some (I mean much) data in some directory in which NOW some other filesystem is mounted. In your case in /mybiz or /mnt Can you temporaily umount all of them and then check what is inside (and how much)?
-
HHoward A2 Labs replied to the thread Ceph PGs go inactive when adding large OSDs on new host.No, still on 19.2.3. They're k=5,m=2.
-
OOnslow replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..No. The gateway is not visible from the PVE GUI, AFAIR. The own address 192.166.3.118/24 (see SIX) is in other network than the gateway 192.168.3.1 (see EIGHT). No wonder it can't access other networks.
