Latest activity
-
LLast_Mile replied to the thread [SOLVED] Can't create VMs on PVE 9.1.1 - Empty "Confirm" tab.I still see the same problem. I tried Opera 102 and Firefix 115 on Mac OS and couldn't create a VM.
-
JMoin nochmal, ja, das ist schon klar, aber wie Johannes S. schon schrieb, es soll ein 2nd PBS mit pull-sync werden. Der hat nach dem Pull für GC genügend Zeit bis der neue Pull-Job kommt.
-
Ssilverstone replied to the thread How to enable 1G hugepages?.Thanks for the Explanation. Yeah, i guess the Variable Name is just very confusing. Why have 2 Settings if they have to be the same :) ? I should have read the Description on Kernel.org but I just though it was something like: Obviously that...
-
Syou need to either use 2MB pages or 1GB pages not mox like your trying to do. huge pages will only be used on VMs you have set to use huge pages with else they will use standard 4k pages. huge page allocation also needs to take into account numa...
-
Mmoh1t replied to the thread Proxmox over WIFI (WLAN).For internet, my proxmox ve is connected to a wireless bridge, which sometimes goes offline until it's manually power toggled. The motherboard has a built in wifi adapter, which I want to use as failover (for PVE host + VMs/LXCs). I'm a...
-
JRandnotiz: falls winget verwendet wird (afaik in Server 2025 enthalten) einen Pin auf virtio* bzw Qemu* setzen. Sonst werden bei einem winget upgrade —all fröhlich die Guest Tools aktualisiert. Edit: https://winstall.app/apps/RedHat.VirtIO
-
JNormalerweise müsstest Du über den Gerätemanager gehen, das entsprechende Gerät auswählen, es entfernen und den Treiber dabei löschen. Den PC / VM neu starten und den älteren Treiber dann über den Gerätemanager installieren. Evtl. Reicht es auch...
-
Yyuuki08noah replied to the thread DNS Resolution Fails on Some VMs in Proxmox EVPN-VXLAN Network (Ping Works).I had solved this problem by disable Exit Node Local Routing option
-
GGilberto Ferreira replied to the thread [SOLVED] frr.service doesn't restart when call ifreload -a ou doesn't start in boot time..It's happens again... New fresh installation. After activated frr hungs on boot I am using this options in daemon for frr bgpd=yes ospfd=yes ospf6d=yes ripd=no ripngd=no isisd=no pimd=no pim6d=no ldpd=no nhrpd=no eigrpd=no babeld=no sharpd=no...
-
-
JJohannes S reacted to UdoB's post in the thread Migrating from mdadm to zfs despite using different disk sizes? with
Like.
Yes, technically everything is possible as "everthing is a file". You can stack filesystems on top of block devices as usual and then repeat this step as often as you want to. (Or an LVM physical volume on top of a ZVOL.) The complexity... -
JJohannes S reacted to meyergru's post in the thread [SOLVED] No more wake-on-lan from VM guest with Like.
Wow. Got it: Ubuntu 24.04.4 LTS with kernel 6.8.0-100 does not work right any more, 6.8.0-90 does. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2141906
-
JJohannes S reacted to DaGerba's post in the thread [SOLVED] Could replacing ZFS with Hardware Raid fix IO delay issue? with Like.
On saturday the fourth 4TB SSD arrived and I made a fresh install on a ZFS RAID10. Although the effect is not as good as I was hoping the system is running quite ok and working on the Win11 VMs is acceptable. IO delay is now below 1% most of the...
-
Mmu5h3r replied to the thread Very frequent AppArmor logs after updating PVE.In my case, setting up AppArmor inside containers helped. pct enter <id> echo "/run/systemd/journal/dev-log rw," >> /etc/apparmor.d/local/usr.sbin.rsyslogd apparmor_parser -r /etc/apparmor.d/usr.sbin.rsyslogd reboot This is probably what fiona...
-
BBayani replied to the thread [TUTORIAL] 2025: Proxmox PCIe / GPU Passthrough with NVIDIA.Thanks for this tutorial. I have been trying to get the passthrough to work for a couple of evenings now, but still no luck. I'mm keep trying since I'm completely new to the scene. Very exited to start home labbing with plenty of ideas. Edit...
-
cwt replied to the thread Wie downgrade virtio 1.285 auf 1.271?.Randnotiz: falls winget verwendet wird (afaik in Server 2025 enthalten) einen Pin auf virtio* bzw Qemu* setzen. Sonst werden bei einem winget upgrade —all fröhlich die Guest Tools aktualisiert. Edit: https://winstall.app/apps/RedHat.VirtIO -
OOnslow replied to the thread VM connection issues after subnet change. What am I missing? Real time problem..I mean network configuration as seen from inside of the VMs. Also pay attention to which addresses are their gateways configured.
-
Nnaps1saps posted the thread [SOLVED] Trouble with iSCSI and cluster node inconsistency in Proxmox VE: Installation and configuration.I have 3 iSCSI targets on 2 NASs. Two of targets (one on each NAS) are connecting fine on both nodes in my cluster. Node 01 is having issues with one new target that is on the same device as another target that is working fine. Node 02 is fine...
-
OOnslow replied to the thread Install/Boot Issues on Supermicro Server.Welcome, @azae Can be various reasons. While booting, try adding nomodeset in the kernel command line. If it doesn't help, remove quiet from the kernel command line to see possible hints. If still no success, you can try adding acpi=off there...
-
CThe Proxmox features highlists list the Status of final delivery of the "innovative Proxmox Message Tracking Center". What is really meant by status "delivered" Does the confirmation come from the recipient’s mail server? Does this mean...
-
Aalgorges reacted to Dep1911's post in the thread Error : said: 451 4.4.0 detected undelivered mail to <address> with Like.
Everything's great, I found a solution: https://forum.proxmox.com/threads/detected-undelivered-mail-to.180292/
