Latest activity
-
Aazae posted the thread Install/Boot Issues on Supermicro Server in Proxmox VE: Installation and configuration.Hardware: -sys-5029p-wtr -LSI MegaRAID 9265-8i PCI card -Intel cpu Initially could not even get the installer to run, it would freeze on "loading initial ramdisk" but after some changes to the UEFI/BIOS boot options eventually got it installed...
-
DDriv3r posted the thread Missing Proxmox backups and emergency mode after minor kernel update in Proxmox VE: Installation and configuration.Hello everyone. After updating Proxmox VE 8 using apt update and apt upgrade (now I know that needed to use apt dist-upgrade instead) from 6.8.12-12 to 6.8.12-17 and rebooting Proxmox booted into emergency mode. Also before the reboot were many...
-
Ggctwnl replied to the thread What is correct way to install ... intel-microcode ?.It seems to be there are instructions for converted source lists and old ones. E.g. the file debian.sources contains after conversion # Modernized from /etc/apt/sources.list Types: deb URIs: http://ftp.nl.debian.org/debian/ Suites: trixie...
-
Eednt replied to the thread Which priviledge is needed for disconnect a network interface?.user.cfg: I used student_104 for the tests Config:
-
Mmmmmmmm replied to the thread IO error when I try to backup my vm after installing nvidia-drivers on the vm.I've installed vm from template, did backup at every step, i've tried to restore previous backup and it worked I've tried to backup it on another location and same error i will try to move from this sources to another and test again thanks
-
Ghttps://community-scripts.github.io/ProxmoxVE/scripts?id=nic-offloading-fix This helperscript worked for me =)
-
shanreich replied to the thread Confused regarding guest isolation on cluster.It seems like there are no rules generated (judging from the nft list ruleset output) Is the pve-firewall service still running? Did you enable the firewall on datacenter level? Otherwise no rule will be generated at all. -
Nnico1875p replied to the thread [solved] Help needed with trunked vlans.Hello, You are mixing two VLAN models: A VLAN-aware trunk bridge (vmbr0), which carries a VLAN trunk and transports tagged VLAN traffic Per-VLAN access bridges (vmbr50, vmbr200), where tagging is done at the interface level (eno1.50 /...
-
Ggpoudrel replied to the thread What's the expected content of "/etc/initramfs/post-update.d/systemd-boot"?.Hello, I recently upgraded pve 8 to 9 with UEFI. I checked I had systemd-boot-efi package correctly installed. It did update my 2 NVMe EFI partitions automatically. Get:1 http://ftp.fr.debian.org/debian trixie/main amd64 systemd-boot-efi amd64...
-
I've enabled 'NUMA node per L3 cache' for my (single socket) 5950X system. It does make it more clear which cores and threads are on which CCD. All I can really say is that it appears to work fine, but it also worked fine before.It seems to... -
Pproxman4 replied to the thread VM CPU issues: watchdog: BUG: soft lockup - CPU#7 stuck for 22s!.looks interesting i'll definitely give it a try. thanks.
-
jsterr replied to the thread NUMA Nodes Per Socket Configuration.This is a additonal setting that can be set "NUMA node per L3 cache" but did you also try to set "Nume nodes per node" to a different value then the default? On my side its set to 1 at default. I am interested in knowing if more numa nodes is...
-
fba replied to the thread IO error when I try to backup my vm after installing nvidia-drivers on the vm.Hi, if the same error is triggered in stop mode for backup the underlying storage or connection to the target storage might be the culprit. I would check smart values of the disk first. Have you tried restoring the last backup? -
DDigitalLF posted the thread from 3node to standalone. lost config.db in Proxmox VE: Installation and configuration.Hi all! I really messed up here. First i moved all VM/LXC to "PVE-1" from "PVE-2" and "PVE-3". Then I converted my 3 node cluster to standalone's and with that i lost my config.db.. I now need to figure out how to recover my VM's/LXC's. I...
-
Llooski replied to the thread Can't Connect to GUI.oh goodness... The cat cable wasn't pushed all the way in. I'm sorry. Not your realm of expertise... but does anyone know why a windows 10 pc can't connect to the lan. I can't connect to my server, nas or router. My macbook can connect to everything
-
HHotdog replied to the thread [SOLVED] SUCCESS: ASUS Intel NUC 13 Pro (i5-1340H) iGPU Passthrough on Proxmox VE 9.Thank you very much, it helped and I did the same for my setup https://forum.proxmox.com/threads/gpu-passthrough-manual-for-intel-n100-i5-7500t-uhd-630-esprimoq957-for-debian.180790/
-
Uudotirol replied to the thread Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF.If you have a Proxmox subscription for the affected servers, you should create a support ticket, the support staff at proxmox is usually very helpful. Apart from this, if your boss is indeed a "mean" guy, then maybe you should tell him not to...
-
Nnico1875p replied to the thread evpn? network segmentation?.Hello. Are you trying to build something similar to an AWS VPC multi-tenant architecture, with a VRF per zone? Or NSX like? You can build a PoC, but if your goal is true VRF-based routing separation (independent routing tables, overlapping IP...
-
HHotdog posted the thread [TUTORIAL] GPU Passthrough Manual for Intel N100/i5-7500T/UHD 630/EsprimoQ957 for Debian incl. HDMI Audio in Proxmox VE: Installation and configuration.Thanks to: https://forum.proxmox.com/threads/success-asus-intel-nuc-13-pro-i5-1340h-igpu-passthrough-on-proxmox-ve-9.180742 HARDWARE Model: Mini PC with Intel N100 or Fujitsu Esprimo Q957 with Intel i5 7500 iGPU: Intel UHD Graphics, no...
-
Bblah posted the thread How to backup selected partitions used by a W11 VM. in Proxmox VE: Installation and configuration.Hi, I have installed Proxmox VE 9.15 in a system on which W11 was installed on a 1TB nvme drive. I have setup Proxmox config with a 1TB sata drive for the Proxmox OS and a backup directory, and the nvme drive with the existing W11 OS partitions...
