Latest activity
-
Ppattonb replied to the thread PVE 9 + boot hard drive.ok, thank you,, I like that. I haven't yet investigated(worked with) PBS, but I should accelerate that . thank you
-
Pgreetings, I have to re-install a PVE ( as the boot ssd drives are failing, and the cost of replacing with enterprise grade ssd is prohibitive at the moment. I have a couple of 2 tb enterprise sata drives. I am curious what I can use the excess...
-
cheiss replied to the thread Can't Connect to GUI.Hi, as visible on the pictures, the physical interface nic0 (and thus the connected bridge vmbr0) is marked as NO-CARRIER. This means that no cable connection was detected. Have you tried another cable/switch port? You can try checking the... -
Sshmel reacted to fba's post in the thread Auto install through iPXE (for Proxmox v8 and v9) with
Like.
There is patch on the devel mailing list for using the proxmox-auto-install-assistant to get an initrd, vmlinuz and an example config for ipxe booting, aside of the iso: https://lore.proxmox.com/all/20260204121025.630269-1-c.heiss@proxmox.com/... -
Aalexskysilk replied to the thread Hardware interface packages best practices.I'd say that the question is too broad for a reasonable answer; most "software" doesnt care about direct access to hardware. application that need DO need access (eg, GPU) have these methods to accomplish: 1. for exclusive access, a gpu can be...
-
Mmaze-m replied to the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen?.Vielen Dank dir für die wirklich ausführliche Erklärung! Meine '/dev/sdf' hab ich gestern noch umformatiert und das ist auch soweit durchgelaufen. Wie kann ich die Platte denn jetzt meinem 'Datengrab' Pool hinzufügen? oot@pve:~# zpool status...
-
-
AAgeOfPanic replied to the thread Ubuntu server 24.04 fails to install on VM.Now that I got VMs working again, I'm trying to create a LXC based on the official Ubuntu templates. Creating it works fine, but afterwards it will not connect to the ubuntu archives for updates or ping google. Has anybody found a workaround for...
-
LHello! So I'm a hobbyist, just find it fun to have a home server. I am not versed in networking. I have been working on this for hours now and I feel I have exhausted what google has provided. I have a Ubiquity router in case that matters. It...
-
-
Nnideh replied to the thread Error: Device /dev/dri/card0 does not exist after LXC update.Thank you very much Impact. When attempting to reboot (I rebooted multiple times before...) I held the shift key to access the boot menu... ... and magically, my LXC started ! Not sure what happened, but the issue is solved now. Did it somehow...
-
AAelachhab replied to the thread Proxmox EVPN iBGP to Arista SW.Hello kemeris, I am trying the same setup, but I get some problems, I receive the routes in my even vrf in the Arista but they are installed with next-hop Null0. and I don't understand where is the problem. If you succeed the setup, can you...
-
Ttknp replied to the thread Proxmox 9.1.5 breaks LXC mount points?.I had to downgrade back to 6.0.18. I think I've found why mine is still failing differently from the NFS/bind mount cases. My containers all have cloud-init ISOs mounted from local storage like `mp0...
-
HHeld replied to the thread NUT on 9.1.Thanks. Didn't help though... But I did a reboot of my host (after migrating a couple of workloads). After this reboot, the driver issue no longer appeared and things work just fine. Odd.
-
Kkrendilok reacted to padi's post in the thread Successful Dual NVIDIA H200 NVL Passthrough + Full NVLink (NV18) on Proxmox VE 8.4 (HPE DL385 Gen11) with Like.
hey @sam.lee @krendilok thanks for sharing :) I'm trying something similar on latest Proxmox v8.4 with 8xH200SXM (with 4 NVSwitches) on Dell PowerEdge XE9680 but I cannot get it work ... so far: > nano /etc/default/grub...
-
Nnideh replied to the thread Error: Device /dev/dri/card0 does not exist after LXC update.Looks like there is no kernel driver to be seen: root@proxmox1:~# lspci -nnk -s 00:02.0 00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-N [Intel Graphics] [8086:46d4] DeviceName: Onboard - Video Subsystem...
-
Nnideh replied to the thread Error: Device /dev/dri/card0 does not exist after LXC update.Thanks Impact. Can you please guide me through this?
-
EErnie95 replied to the thread NUT on 9.1.Hi, I follow step by step this how to : https://www.kreaweb.be/diy-home-server-2021-software-proxmox-ups/#4_DIY_HOME_SERVER_-_PROXMOX_-_NUT_Monitoring It works on my side, perhaps it can help you. Potentially your ID and password in...
-
Nnideh replied to the thread Error: Device /dev/dri/card0 does not exist after LXC update.Thanks Impact. Here is what I get with the code you just shared Linux proxmox1 6.8.12-15-pve #1 SMP PREEMPT_DYNAMIC PMX 6.8.12-15 (2025-09-12T11:02Z) x86_64 The programs included with the Debian GNU/Linux system are free software; the exact...
-
HI've upgraded/reinstalled my Proxmox 8.4 installation to 9.1 through a new ISO install, but I cannot seem to get NUT to work any longer on my host. It used to work under 8.4. Nut-scanner seems to operate normally (using USB so the missing libs...
-
Ccrazywolf13 reacted to Hashfastr's post in the thread PBS cannot restore large disk from S3 with Like.
Success! It took 32 hours and seemed to have quick progress at the start but then tapered off to very slow afterwards. This is with setting the S3 endpoint to be 50MB/s instead of uncapped. I don't think so, my cache disk never exceeded 1.5TB on...
-
HHashfastr replied to the thread PBS cannot restore large disk from S3.Success! It took 32 hours and seemed to have quick progress at the start but then tapered off to very slow afterwards. This is with setting the S3 endpoint to be 50MB/s instead of uncapped. I don't think so, my cache disk never exceeded 1.5TB on...
