Latest activity
-
gurubert reacted to Gilou's post in the thread Making a VM with 2 operating systems in proxmox with
Like.
I'm not sure why you go for dual boot there, and not just use a different VMs, imaged with each OS? To have a single FOG procedure for users? In the physical world, that may make sense to avoid redeploying to switch between OS, but on a VM... -
Gguruevi replied to the thread Shared Remote ZFS Storage.@alex: I agree, but it is often sold as a "High Available" - people have to be more precise with language what they mean with HA (marketing vs reality). But when people here say that something isn't fully HA because there is a gap and then "why...
-
weehooey-bh reacted to spirit's post in the thread 40 node prod cluster restarts when joining a new node or removing. with Like.
from last corosync release https://github.com/corosync/corosync/releases "A new option (totem.ip_dscp) is available to configure DSCP for traffic prioritization. Thanks to David Hanisch for this great improvement." could be interesting for... -
gurubert replied to the thread Dokumentation zum Download für Claude Proxmox Skill.Ich verstehe nicht, warum niemand mehr selber lernen möchte.
-
gurubert reacted to Johannes S's post in the thread Dokumentation zum Download für Claude Proxmox Skill with Like.
Mich würde ja eher interessieren, ob das aus Sicht des Staffs überhaupt gewollt ist. Schließlich wird beim bugzilla ja schon immer einen erstmal der anubis-Ladebalken angezeigt, um die Scraper wegzuhalten.
-
gurubert replied to the thread Ceph multi-public-network setup: CephFS on separate network.No, the separation of the Ceph public and cluster (not private) networks has nothing to do with security. The cluster network is there to transport replication and recovery traffic between the OSD nodes. It can be configured if there is a...
-
gurubert reacted to FingerlessGloves's post in the thread Prevent IPv6 local link on SDN VNet with Like.
https://bugzilla.proxmox.com/show_bug.cgi?id=7312
-
That sounds like reasonable request, it would probably make sense to expose the addrgenmode setting in the VNet options - or even disable it completely for layer-2 zones (VLAN, QinQ, VXLAN). Would you mind opening an enhancement request in our...
-
gurubert reacted to FingerlessGloves's post in the thread Prevent IPv6 local link on SDN VNet with Like.
I feel marking a vnet as "VM traffic only" would be a nice clear way to present the option, ideally default option too, I can't see many wanting the host to be "on" the vnet. I just reread your message, and that's bad the firewall isn't applying...
-
I really think we need either generally allowing disabling link-local on an interface, or simply deny any IP configuration on the SDN bridges.. or a bit nicer, being able mark it for VM traffic only. This bug is not good on default setup btw...
-
spirit replied to the thread 40 node prod cluster restarts when joining a new node or removing..from last corosync release https://github.com/corosync/corosync/releases "A new option (totem.ip_dscp) is available to configure DSCP for traffic prioritization. Thanks to David Hanisch for this great improvement." could be interesting for... -
MMMartinez replied to the thread Ceph multi-public-network setup: CephFS on separate network.Yes, thanks. That's what I'm going to do. Anyway, I'm considering the possibility to separate Ceph public and private networks first, and then add the VM interface to the public network. This way the setup will be more secure. Regards.
-
gurubert replied to the thread Ceph multi-public-network setup: CephFS on separate network.All Ceph daemons register in the CRUSH map wih exactly one IP and one port. You can have multiple public networks in the config but this is for the case where different hosts of the Ceph cluster are in different IP networks. It is not practical...
-
gurubert reacted to alexskysilk's post in the thread Ceph multi-public-network setup: CephFS on separate network with Like.
I dont think that note is as wide in scope as the working seem to suggest. Public and Private (cluster) traffic dont need routability to each other to function, so you're safe on that front. Reading up further, monitors can only have one pinned...
-
bbgeek17 replied to the thread VMs loosing network.Hi @Drunkm0nk , welcome to the forum. It does not seem probable that an upgrade of BIND9 package installed on a hypervisor would affect intermittent connectivity issue on random VMs. You have not provided nearly sufficient information to get... -
fstrankowski replied to the thread JBOD mit ZFS.Sicher kann er abwechselnd auf verschiedene Backup-Ziele sichern. Einfach verschiedene Jobs mit jeweils anderem Storage Ziel (nichts anderes ist ein PBS) anlegen: -
-
MI am interested in creating a CephFS store for storing security camera footage; Essentially storing very large video files. I don't know what CEPH calls what I know traditionally as block size, but is there a way to adjust that setting? Are...
-
spirit replied to the thread Ceph PGs go inactive when adding large OSDs on new host.what is your pool size replicat number ????? (looks like replicat x7 ????)
-
AWhy you have external help? When External Audit comes(Grant Thornton,KPMG etc etc) first they ask you is "what if you get hit by a bus", who will support that and that. That is why you need to have external maintenance contracts.
-
Nness1602 replied to the thread Shared Remote ZFS Storage.Why you have external help? When External Audit comes(Grant Thornton,KPMG etc etc) first they ask you is "what if you get hit by a bus", who will support that and that. That is why you need to have external maintenance contracts.
