Just because a vendor does it, doesn’t mean it’s a good idea. Vendors sell some shady stuff and it works, most of the time. Most VMware clusters, even relatively large ones indeed have a storage design that basically resembles DRBD, mdraid or...
Hab ich schon geschrieben, du musst nur beim gleichen Hersteller bleiben.
Genau mit vielen Usern ist ein RaidZ immer tödlich. (mit HDDs)
Wenn man einen guten HW Raid eh im Server hat oder den gebraucht günstig bekommt, kann der mit billigen...
Adding in logs from today after I decided to try it out again once upgrading plex to
Plex Media Server 1.43.1.10495-10cfae054
Feb 12 23:20:32 Olympus kernel: xe 0000:03:00.0: [drm] GT1: trying reset from guc_exec_queue_timedout_job [xe]
Feb 12...
Trying to use an Arc B580 I recently purchased and test with Plex's preview build which has support for Battlemage transcoding. Whenever I switch transcoder over to the Arc GPU instead of my igpu on 10850k, my logs begin to fill extremely quickly...
of course, why should it not?
no need to censor rfc1918 :)
Looks like a permission error.
Take a look at this:
https://pbs.proxmox.com/docs/
Now what tripped me up the first time setting it up, was this paragraph here:
Permissions for API...
ZFS does not work/play well with RAID controllers. To use ZFS, you should have a disk controller in HBA mode
Proxmox in general does not work and play well with consumer SSDs. The boot drives get a surprising amount of traffic. It is...
So... you're both kinda right and kinda wrong.
It depends on the TYPE of license and how you bought it.
RETAIL licenses are not tied to an underlying Windows server license, and therefore can be moved with the VM.
OEM licenses ARE tied to an...
Sorry to revive this, but just wanted to let other people know that I found a solution.
At least in my case, I had to "activate" the replication job.
Then clicked in "Schedule Now" and the replication removal executed in a few seconds.
With the...
Hello Everyone,
I am experiencing an issue while migrating my VM from vSphere to Proxmox. I have successfully done this previously, but on the new server, the VM goes to a blue screen after migration.
I have set the hard disk to SATA, as I...
Hello, been struggling with this recently and seeing that S3 support is new I suppose it's time to make a post.
I have PBS 4.1.2 running as a VM on, and supporting, a PVE 8.4.16 installation. PVE has 32c/64t with 768GB RAM. PBS has 32c with 32GB...
Currently we are trying to find the cause for this. Opened a Ticket both @proxmox and @Veeam.
Looking through the logs we can reproduce this timeline:
1. We shut down the VM and change CPU type to v3 + do Windows Updates. During the shutdown...
Yes you can do it all in the UI using this methodology. I prefer having a separate storage server, but that is just me. How are you going to back up the data?
Related to the DHCP setup. When changing to DHCP, the hosts file can be auto updated with the available script. How about DNS? Do I just remove the DNS that was setup during the initial install prior to moving it to a new location?
Just because a vendor does it, doesn’t mean it’s a good idea. Vendors sell some shady stuff and it works, most of the time. Most VMware clusters, even relatively large ones indeed have a storage design that basically resembles DRBD, mdraid or...
ive got PVE 9.1.1 & PBS 4.1.0. im getting "permission check failed". guys im aware that i NEED to run the PBS in another box but can it FUNCTION on the same box?. im testing the concept before pulling out the 2nd bare metal. heres what ive setup...
This is true for their storage stack but sadly (see discussions in this thread) not for their container/vm stack. Regarding a potential partnership I really don't know. On one hand it would be definitively in the interest of many customers but...
As usual with licensing in general - it depends. If you are an enterprise with an existing agreement - check your agreement. You may need volume licenses, software assurance, and if you are remotely accessing or using Office in VM/VDI style, you...
I'm guessing you run a single node setup then, with the RAID6 on it ?
Just make the RAID6 a LVM pv, to host a lvmthin volume for your VMs if so, I guess you could even do it fully in the UI :P