Latest activity
-
Oodhiambo replied to the thread [SOLVED] MINISFORUM MS-A2 (AMD Ryzen 9 9955HX) - solution, use a ZFS option and not EXT4 when setting up storage.Did you also try the non-graphical installation mode?
-
fba replied to the thread Connection failed (Error 500: close (rename) atomic file '/var/log/pve/tasks/active' failed: Permission denied).Segmentation fault is highly unusual, imho. Run Memtest86+ to check for memory errors. Check your disk with smartctl -a /dev/sdX, replace sdX with the actual drive, like sda or nvme0n1 or whatever. If you don't know, run lsblk to get an overview... -
Bbeisser replied to the thread NiPoGi E3B - gpu passthrough.da gibts ne scrollbar in deinem screenshot. scroll mal runter und mach noch einen screenshot.
-
Mmouse51180 replied to the thread [SOLVED] NodeMesh Fabirc Question.I am completely new to Proxmox and my Linux is limited...so be gentle. Linux pve-node0 6.17.9-1-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.9-1 (2026-01-12T16:25Z) x86_64 The programs included with the Debian GNU/Linux system are free software; the...
-
I hope you mean you have a PBS VM on PVE- because as it looks you mean literally on the same Host bare metal! This would be bad! -
Ggfngfn256 replied to the thread PVE to PBS.I hope you mean you have a PBS VM on PVE- because as it looks you mean literally on the same Host bare metal! This would be bad!
-
EI miss this Maintenance Mode function in the GUI too. Last year i migrated our VMware and Hyper-V Clusters to Proxmox. The Maintenace mode is one of only Thing i miss. Hoe therer will be a button in the near future.
-
MMarkusKo replied to the thread [SOLVED] Can't access Web UI after bulk shutdown my whole VM.On MacOS you may have to give third party browsers the permission to access the local network.
-
IIsThisThingOn replied to the thread PVE to PBS.You don't have to, but I would highly recommend it. Also make sure it is offsite in case of a fire.
-
bbgeek17 replied to the thread PVE to PBS.Hi @BigBadBlack , welcome to the forum. You do not. It would be helpful if you provided actual information that you tried to input, errors you received, etc. If you are unable to provide accurate information in text format (please use CODE...
-
BFor some reason I can’t get my pve to authenticate my pbs. I have tried any and everything except the right thing I presume. Its on the same bare metal to test then I plan to move it to its on bare metal. Do I have to have PBS on separate bare...
-
Mmouse51180 replied to the thread [SOLVED] NodeMesh Fabirc Question.I left it as a /28 for more nodes to be added at a later time. When the mesh was configured, it looked like Proxmox setup all the routing needed during the wizard configuration, but that is what I curious about...if it wasnt and there is more...
-
DderMiepz reacted to Gilou's post in the thread [SOLVED] PVE 9.1.5 doesn't boot after dist-upgrade (AMI BIOS) with
Like.
Heh, well, if that works.. then, problem solved :P I'm surprised it sees the boot option but doesn't allow you to set it.. OVH had some servers that would reset the boot order also without asking.. anyway, now you know a bit more about UEFI and... -
DderMiepz reacted to Gilou's post in the thread [SOLVED] PVE 9.1.5 doesn't boot after dist-upgrade (AMI BIOS) with Like.
Can't you actually set the proxmox option there in the Setup? You can maybe change the entry, or just map BOOTX64.EFI to grubx64.efi in proxmox.. maybe proxmox-boot-tool (and its --grub option) can do it for you..
-
DderMiepz reacted to Gilou's post in the thread [SOLVED] PVE 9.1.5 doesn't boot after dist-upgrade (AMI BIOS) with Like.
The Wiki gives you keys heh, use a debian live CD or a rescue shell.. you can try efibootmgr -n 0000 to avoid the 0003 entry that is probably unhappy. If that works, well, set the boot order to start with the proxmox entry. If it fails, mount...
-
Mmfederanko replied to the thread EFI Disk Timeout during Boot.If I got this right, you have your boot disk attached via a HPE RAID controller. Is it at all possible to attach the disk directly and see if maybe the controller is/was an issue?
-
aaron replied to the thread Cluster two node active with shared storage in FC connection.how? any errors in the task log? -
Aaflocco replied to the thread Cluster two node active with shared storage in FC connection.ok, yes classic LVM everything works, except live migration.. root@pve01:~# cat /etc/pve/storage.cfg dir: local path /var/lib/vz content iso,import,backup,vztmpl lvmthin: local-lvm thinpool data vgname pve...
-
HHoward A2 Labs replied to the thread watchdog detected hard lockup on cpu XX.I just encountered this on one of my Cisco C240M5s. After updating everything including the kernel to 6.17.4-2-pve, it fails to boot. Hangs with three "watchdog detected hard lockup on cpu" messages on the console. Rolling back to 6.17.2-1-pve...
-
GGilou replied to the thread [SOLVED] PVE 9.1.5 doesn't boot after dist-upgrade (AMI BIOS).Heh, well, if that works.. then, problem solved :P I'm surprised it sees the boot option but doesn't allow you to set it.. OVH had some servers that would reset the boot order also without asking.. anyway, now you know a bit more about UEFI and...