Latest activity
-
CComfySofa replied to the thread Intel B50pro passthrough..Yep .it was in the command centre...but it said rebar was off but it was enabled in the bios ..
-
Rradoslav replied to the thread input/output error.This photo may clarify things. What I did: - I installed Proxmox on a 600GB SAS disk - I created a VM and installed Ubuntu - I added all 4TB SSD disks to the virtual machine in Porxmox one by one with this command: qm set 100 --virtio...
-
-
UWhen you tested out with windows, did you install the arc pro drivers? And it showed B50 in the Intel Command Center? I received my B50 two weeks ago and I had to do a firmware update in windows for it to work fully. Installing the intel arc pro...
-
TTahsin replied to the thread Intel B50pro passthrough..When you tested out with windows, did you install the arc pro drivers? And it showed B50 in the Intel Command Center? I received my B50 two weeks ago and I had to do a firmware update in windows for it to work fully. Installing the intel arc pro...
-
DDarkk reacted to silverstone's post in the thread Mountpoints for LXC containers broken after update with
Like.
I Updated this evening and indeed it seems to have fixed this specific Issue. Seems to work also for me that don't have any write access to that mountpoint (from the Host I mean) :) . -
CComfySofa replied to the thread Intel B50pro passthrough..Ok its 6.17.9-1-pve
-
TTahsin replied to the thread Intel B50pro passthrough..In proxmox shell type in uname -r
-
Ffabio.rodo replied to the thread Crash on kernel upgrade.hi, for those who might need this I managed to fix this after a change of the nvme (from kingston to wd black, not a solution, but helps) and a change of powermode (AFTER MONTHS and thanks to Gemini) CPU Power Management for System Stability on...
-
HHallo, ich bin absoluter Neuling was Proxmox betrifft und habe gleich folgendes Problem. Ich habe Proxmox 9.1 VE auf einem Soyo Mini-PC installiert, beim ersten hochfahren nach der Installation sollte ich gestern den Login eingeben. dies habe...
-
Aalexskysilk replied to the thread input/output error.easy way to determine whats going on. OP please post the content of your vmid.conf for your ubuntu vm. If you ARE passing the drives to your VM, this behavior is consistent. mdadm is picking up the drive at pve boot, and then cutting them off...
-
Ssilverstone replied to the thread Mountpoints for LXC containers broken after update.You have a Point. Isn't it pve-test where the modifications land first though, before they get to pve-no-subscription ?
-
Ssilverstone replied to the thread Mountpoints for LXC containers broken after update.I Updated this evening and indeed it seems to have fixed this specific Issue. Seems to work also for me that don't have any write access to that mountpoint (from the Host I mean) :) .
-
Ggfngfn256 replied to the thread input/output error.I must say I don't exactly understand what you mean: You say above you only have 1 VM on the Proxmox host, but then you refer to Ubuntu and a virtual machine? Maybe you just mean the Ubuntu desktop within the VM? If you passthrough a disk/s to a...
-
OOnslow replied to the thread input/output error.I don't understand. In Ubuntu AND in the VM? Isn't the Ubuntu a VM?
-
JJohannes S reacted to bbgeek17's post in the thread Simple concept for manual, short term use failover without significant downtime? with Like.
This is exactly the impression I was getting from the discussion as well. The OP wants a “simple” small-business solution that nonetheless delivers a fully featured, reliable DR setup with many characteristics typically associated with enterprise...
-
JJohannes S reacted to alexskysilk's post in the thread Simple concept for manual, short term use failover without significant downtime? with Like.
I think you may be obsessing about the "performance" and "cost" aspects entirely too much. 1. What is the makeup of your payload? (number of vms, function, ACTUAL performance in IOPs) 2. a backup device MUST be a separate device then the...
-
bbgeek17 replied to the thread [SOLVED] Add an additonal SCSI controller to a VM hardware like in VMware.You cannot add multiple SCSI controllers through the PVE UI. To do so, you will need to experiment with direct QEMU options via --args. I am not sure which UUID your SQL installation is bound to, as there are several possibilities. Most of these... -
bbgeek17 replied to the thread [SOLVED] Web GUI Inaccessible to All but 1 Computer.You are very welcome. Happy you found an easy explanation. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Ddevmon replied to the thread Anfänger Frage.Vielen Dank für die beiden Antworten bisher. Mit dpkg-reconfigure console-setup habe ich schon rumgespielt - ich treffe font und Grösse allerdings nicht damit es wie bei den anderen Konsolen aussieht. so sieht es in der Host Shell aus. und...
-
-
Ggasherbrum posted the thread roadmap question in Datacenter Manager: Installation and configuration.On the roadmap page i see "Off-site replication copies of guest for manual recovery on DC failure (not HA!)" Does this mean replication of VMs to another cluster (like zfs pool) or something else? If its VM replication I would be very...
