Latest activity
-
RRed Squirrel replied to the thread Is there a mechanism that could cause a node to shutdown?.it's a very slow process since SSH keeps locking up but here's the output of those commands: root@pve02:~# pvecm status Cluster information ------------------- Name: PVEProduction Config Version: 11 Transport: knet Secure...
-
-
RRiderofDragons68 replied to the thread vulnhub machines.Here is some additional information: I am creating the VM's on my Apple MAC Pro(2013-2017) with 64GB, 12 core processor. I also have 2 additional nodes and they are both Dell R620's. 1 have 1 with 2.7 GHZ 8 core 16 thread and the other is 12...
-
KKingneutron replied to the thread Recommended mini PC server to host ProxMox.BTW, there is no capital M in Proxmox. My Beelink EQR6 Ryzen 9 is similar, but I bought it for under $500 well before RAM prices skyrocketed - and upgraded it from 24GB to 64GB RAM. Under moderate load (~6.86 in htop, 1/2 the cores active) it...
-
RI have been trying to convert a few vulnhub machines to Proxmox, so far I can get the VM to move that is no problem. The issue is that the network card is not detected. I am getting a new adapter that is being detected, but it will not detect a...
-
fstrankowski replied to the thread Is there a mechanism that could cause a node to shutdown?.Again, we need information about your cluster. pvecm status pvecm nodes cat /etc/corosync/corosync.conf corosync-cfgtool -s (on all nodes) journalctl -xeu pve-cluster.service -
KKingneutron reacted to alma21's post in the thread free Starwind x Proxmox SAN storage plugin with
Like.
Hi, I have installed and tested the free / open source Starwind Proxmox SAN storage plugin on a small testcluster (PVE 8) with shared block storage and it works really good .... thin provisioning, snapshots, thin disk auto extension, live... -
KI would want to emphasize few points: This is especially relevant for Proxmox, since by default you will only with the small default 16k volblocksize. Instead of having a huge RAW VM disk, that is a pita to backup and has a 16k volblocksize...
-
Koh ok, thats fine. I could allocate ~6gb thanks, I think thats a key message - test and find out ps for anyone else reading; I found this pretty helpful to explain the inner workings...
-
RRed Squirrel replied to the thread Is there a mechanism that could cause a node to shutdown?.The cluster itself has quorum but the 4th node did not. it's a 4 node cluster, I set one of the nodes to have 2 votes (this one never went down) as setting up qdevice looks quite involved from what I read, and I plan to add a 5th node eventually...
-
DDarkangeel_hd replied to the thread Nested PVE (on PVE host) Kernel panic Host injected async #PF in kernel mode.Well... that was fast... It appears to make no difference
-
fstrankowski replied to the thread Is there a mechanism that could cause a node to shutdown?.He said it doesnt. But first of all we need some basic information about that cluster overall :D
-
SteveITS replied to the thread Is there a mechanism that could cause a node to shutdown?.Does it have a quorum? If not the nodes will reboot. -
fstrankowski replied to the thread Is there a mechanism that could cause a node to shutdown?.Im curious, do you know the basic requirements for a cluster to operate normally? How does your cluster look like. Please provide basic information about your whole topology. And please dont reply-reply-reply to your own topic, you can just edit...
-
fstrankowski replied to the thread Proxmox Backup Client aus einer VM.Probier es mal mit der IP deines PBS anstelle des Hostnamens.
-
Ppvpaulo posted the thread Question about using namespaces in Proxmox Backup Server with multiple PVE clusters in Proxmox Backup: Installation and configuration.Hello, good afternoon everyone. Could you please help me clarify a question? I currently have a Proxmox Backup Server (PBS) properly configured, with a datastore named BKP. I have one Proxmox VE (PVE) cluster that is already storing its backups...
-
Die Macher der Helperscrips haben das bestimmt berücksichtigt*hust* Schau mal da nach was die zum Thema Update stehen haben. Frage mich allerdings was das Thema im Forum PBS zu suchen hat.
-
FFlickoDrimbompf replied to the thread Proxmox Host IPv6 DHCP not working.Excellent. You can also set the sysctl accept_ra as a post-up command in the vmbr0 inet block your your interfaces config: https://blog.fernvenue.com/archives/use-dhcp-and-slaac-on-proxmox/ . For others who coma along later.
-
FFlickoDrimbompf replied to the thread Enabling IPv6 SLAAC removes all IPv4 VM connectivity.This is quite late but I found a working solution (for me): https://blog.fernvenue.com/archives/use-dhcp-and-slaac-on-proxmox/ You don't configure inet6 separately, you use a post-up line in your vmbr0 inet interface block to set the sysctl...
-
RRed Squirrel replied to the thread Is there a mechanism that could cause a node to shutdown?.Yeah whole cluster is finished. Don't know what to do. VMs are running but it's like the CPU keeps locking on and off on the entire cluster. Performance is complete garbage, can't do anything on any of the VMs. Keep losing connection to the...
-
Aa-shark replied to the thread How to download LXC version of OpenWRT and run it on Proxmox.@Bob.Dig Based on this post on proxmox forum, there seems to be an issue for Unmanaged OS Type in LXC which has a patch that seems to fix this issue. Hopefully, we'll get an update soon.
