In fact you can't modify socket or cores value without rebooting. Only the Vcpu value can be modified without rebooting when you want to do CPU Hotplug .
virtio-gpu und auch "standard" bei beiden trat das Problem auf. sehe auch das noch viele der vmware treiber im drivers ordner sind. Obwohl der uninstall sauber durch lief.
Glad I could help. Sometimes all you need is an outside opinion to get out of the tunnel :-)
You can mark the thread as solved by using the subject dropdown via editing your first post.
Cheers
Blockbridge : Ultra low latency all-NVME shared...
This was after the reboot.
root@pve1:~# cat /etc/pve/ha/resources.cfg
vm: 117
comment dovecot imap server
state started
vm: 600
comment unify controller
state started
vm: 118
comment Saving SMB Shares to...
Hi, it wasn't a hardware issue..
You just made me realize something with your question about a proxy, on Proxmox verson 8, we had implemented an nftables prerouting rule, forwarding port 443 to 8006 (as the nginx relaod with ACME LE certs would...
I had also a 'freeze' during creation of a VM on a new Proxmox 9.1.1 installation. After some research I found that creating a VM via the CLI was working fine, but the GUI suffered. The GUI uses API's towards the pveproxy service. If there are a...
I did not resolve the trouble but I found a workaround : I migrated the VM to an other PVE node and migrate back. I also notice that for Passthrough Physical Disk, the disk size indicated in the `VMID`.conf file is not used.
If you have an idea...
I'm not sure when the reboot happened here, did it happen before the syslog excerpt (before 2026-02-03T14:52:36.278369+01:00) or in the middle at 2026-02-03T14:56:46.362744+01:00?
If it's the latter I don't see vm:118 being started here after...
Naja, aber ein ganzer Monat hängt an einem Tape. Zum Erfahrungen sammeln kann man das machen, aber toll ist das trotzdem nicht. ;)
Ich bin der Freund von Praxisnahen Testumgebungen, sonst gewöhnt man sich falsche Sachen an.
in PVE 8.1 and PVE 9.1 as i know:
When adding or removing VNET in SDN i don't see any logs in web UI and in journalctl -f, but i want see what changed with information to understand who add vlan999 and who removed it. How to solve this...
That escalated quickly....
Ich konnte alles wiederherstellen.
Schritte:
Im Datacenter habe ich den "local-zfs" (der cluster-weit gilt) auf meine erste node "production" umgestellt.
Im Datacenter habe ich den fehlenden "local-lvm" für meinen...
Ich glaube du machst das alles zu kompliziert.
Bei vSphere DRS hast du auch keine Cores angepinnt sondern das dem Scheduler überlassen.
Mach das doch bei KVM genauso.
Alle normalen VMs werden wenn möglich immer je von einer CPU bedient.
Hast du...
Die Disk wird doch sauber angezeigt und sollte dir in der GUI auch in deinem ThinPool angezeigt werden.
Falls du diesen Host zu dem anderen hinzu gefügt hast, dann fehlt dem Cluster die Info über den Thin Pool.
Dann auf Datacenter>Storage gehen...
That escalated quickly....
Ich konnte alles wiederherstellen.
Schritte:
Im Datacenter habe ich den "local-zfs" (der cluster-weit gilt) auf meine erste node "production" umgestellt.
Im Datacenter habe ich den fehlenden "local-lvm" für meinen...
Vom Support kam die Rückmeldung, dass es bei VMs mit NFS zu einem Einfrieren kommen kann.
Daher wurde in der neuen Version das Feature „snapshot-as-volume-chain“ umgesetzt.
Es ist erst eine preview, das erste Feedback ist jedoch durchweg positiv.