Hallo zusammen!
Ich habe leider etwas zu viel an meinem System rumgebastelt und bin jetzt auf ein Problem gestoßen, welches ich nicht alleine Lösen kann. Zumindest nicht ohne komplette Neuinstallation von Proxmox.
Folgendes:
Ich habe eine...
I've had the same issue to resolve. I have changed the files whI changed from one subnet to a different one 192.168.'A'.1 to 192.168.'B'.1. Accessing the GUI was working and the VMs all have IPs on the B subnet.
The Issue im having is that the...
My guess is that you can not change ownership or access because your Samba-root (mapped to 10000 on the host) has no rights to the folder of the container (mapped to user 1000 on the host I guess?).
The solution would be to modify the access...
Dear Proxmox-Community, we are asking for your support.
The European Commission has opened a Call for Evidence on the initiative European Open Digital Ecosystems, an initiative that will support EU ambitions to secure technological sovereignty...
what are you trying to tell us with a screenshot without any text in a 3.5 year old thread?
moment, das ist das deutsche forum. was versuchst du uns mit ausschliesslich einen zugeschnittenen screenshot ohne text zu erzählen?
vor allem in einen...
what are you trying to tell us with a screenshot without any text in a 3.5 year old thread?
moment, das ist das deutsche forum. was versuchst du uns mit ausschliesslich einen zugeschnittenen screenshot ohne text zu erzählen?
vor allem in einen...
We've released a KB article since this thread went dormant : https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/
You may find it helpful
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
Ich betreibe 2 mal eine OPNSense als KVM auf unterschiedlichen Servern
Bei beiden habe ich das Problem das innerhalb der Opensense lediglich 1 GB Memory verfügbar ist obwohl mehr zugeordnet ist.
Dies egal ob mit oder ohne balooning
hat jemand...
Having the same issue but my lxc are unprivileged.
lxc-start: 137: ../src/lxc/utils.c: run_buffer: 571 Script exited with status 1
lxc-start: 137: ../src/lxc/start.c: lxc_init: 845 Failed to run lxc.hook.pre-start for container "137"
lxc-start...
Your "+1" is probably better placed over there: https://bugzilla.proxmox.com/show_bug.cgi?id=6144, already mentioned in #47.
You'll also find a patch already mentioned in the last comment.
Hi
I see that this thread is an year ago.
So can you share some real numbers and impressions from the Dorado 3000.
I'm plannig to get one of these for a clients.
Thanks!
I will follow this thread on how to update ZFS to 2.4: https://forum.proxmox.com/threads/zfs-bug-causing-kernel-panic-when-accessing-snapshots-fix-in-openzfs-v2-4-0-is-there-a-simple-upgrade.178636/post-829525
Thank you for the reference.
I just tried and set the special_small_blocks to 1M for this particular dataset and added VolBlocksize to the output.
root@pve:~# zfs set special_small_blocks=1M dozer2/encrypted/hybrid-ssd-016k
root@pve:~# zfs...
Hi. I have the same issue with my LSI 2008.
lspci -nnk -s 01:00.0
01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
Subsystem: Fujitsu Technology Solutions...