Latest activity
-
OYou misspelled the "shutdown" in cron. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread cron job not executed.You misspelled the "shutdown" in cron. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Hhudecof replied to the thread loosing packets on SDN setup when VMs are on the same hypervisor.I ahve found the solution, seem to be be firewall settings bug. Reading the https://ibug.io/blog/2023/10/pve-firewall-drops-tcp-reset/ I figured aoutm the PVE is dropping the tcp/push on tap206i2 interfaces. As first I tried to set this...
-
bbgeek17 replied to the thread Call for Evidence: Share your Proxmox experience on European Open Digital Ecosystems initiative (deadline: 3 February 2026).Considering that virtualization is one of the most critical components of modern cloud infrastructure, it’s hard to think of a more deserving European company in this space than Proxmox Server Solutions GmbH. Blockbridge : Ultra low latency...
-
Aag3r replied to the thread Proxmox 9.1.5 breaks LXC mount points?.yep, i have the same problem, proxmox 9.1.5 lxc with mountpoints, same error, if i reboot this lxc, working if already running.
-
shanreich replied to the thread [SOLVED] EVPN+VXLAN with multi exit nodes after upgarde 9.1 : All VMs are no longer reachable.Is forwarding enabled (for vmbr1.3 in particular)? head -n1 /proc/sys/net/ipv4/conf/vmbr*/forwarding -
MMrt12 replied to the thread Tape-Backup für Anfänger.Jau, wie genau der Spectrum Protect wirklich funktioniert, weiss ich gar nicht, bin da nur User über den Tivoli Client. Bezüglich des PBS: Ja, genau so meinte ich das eigentlich. Zum Beipsiel fange ich diesen Freitag mit den ersten beiden Tapes...
-
Bbluepr0 posted the thread Proxmox 9.1.5 breaks LXC mount points? in Proxmox VE: Installation and configuration.Hi! I just updated to the latest version of Proxmox (9.1.5), and I've noticed that the LXCs with mount points (in my case, NFS from my NAS) are not starting. If I remove the mount point, it starts correctly. See attached images. if I remove...
-
-
MHallo zusammen, ich bin noch relativ neu im Umgang mit Proxmox, bin bisher aber wirklich sehr begeistert davon. Mein letztes Projekt war die Installation von Proxmox auf einem UGREEN NAS. Dabei war insbesondere der Content von smarthomeandmore...
-
Aadofou replied to the thread [SOLVED] EVPN+VXLAN with multi exit nodes after upgarde 9.1 : All VMs are no longer reachable.Yes of course : root@prox1-th2:~# head -n1 /proc/sys/net/ipv4/conf/vmbr*/rp_filter ==> /proc/sys/net/ipv4/conf/vmbr0.3/rp_filter <== 0 ==> /proc/sys/net/ipv4/conf/vmbr0.4/rp_filter <== 0 ==> /proc/sys/net/ipv4/conf/vmbr0.5/rp_filter <== 0 ==>...
-
Jjeffgott replied to the thread VM Migration hangs.I'm not sure what you mean by "run them on the new host". Yes, disks were on local-lvm. I attempted another deployment of the worker VM for Veeam and it failed again: The new VM appears for a while and then disappears. The disks are left...
-
-
DDzTimo reacted to t.lamprecht's post in the thread Call for Evidence: Share your Proxmox experience on European Open Digital Ecosystems initiative (deadline: 3 February 2026) with
Like.
Dear Proxmox-Community, we are asking for your support. The European Commission has opened a Call for Evidence on the initiative European Open Digital Ecosystems, an initiative that will support EU ambitions to secure technological sovereignty... -
shanreich replied to the thread [SOLVED] EVPN+VXLAN with multi exit nodes after upgarde 9.1 : All VMs are no longer reachable.Is it possible that there's something weird going on with sysctl + rp_filter settings? An example for vmbr1.3 I can see from your initial output: Note the forward slash instead of the dot (most likely due to the dot being a significant...
-
Aadofou replied to the thread [SOLVED] EVPN+VXLAN with multi exit nodes after upgarde 9.1 : All VMs are no longer reachable.Hello Stefan, Thank you for your attention. All results are attached. It's from the nodes where I have tested. I can understand that the configuration seems a little "rich" in terms of the network. That's because we are bringing up dual-uplink...
-
Natürlich unter DNS: -
Oder einfacher in der GUI eintragen.
-
Ggralf replied to the thread cron job not executed.Hi, thx for your reply. But if qemu were not installed, would have the VM started ? And aa for the shutdown. I thought that stoping a VM would end in data los or corruption, isn't shutdown a better way to put down a VM?
-
DDocMAX posted the thread Logging of LXC hooks into Web GUI in Proxmox VE: Installation and configuration.hooks: pre-start=/etc/pve/scripts/amdgpu-load.sh,post-stop=/etc/pve/scripts/amdgpu-unload.sh is it possible to show output of the scripts in this window?
-
-
Jmhmm? not sure i get what you mean. which documentation is "behind fake walled gardens" ? every piece of the software and docs are out in the open. Yes, we don't have any detailed guide ourselves on e.g. how you to run jellyfin with a gpu...
-
JJohannes S reacted to UdoB's post in the thread New to Proxmox (Noob) Having issues with Network Configuration with Like.
Sounds good. So..., what is your problem? Please report a) what you wanted to achieve, b) exactly what you did, c) what you expected to happen and d) what happened instead. If possible do everything on the command line and place full quotes...
