Latest activity
-
Bbl1mp replied to the thread Zugriff mit Windows auf ein Proxmox Storage möglich?.Mhm kurze Frage, habt ihr Backup fleecing aktiviert, für den PBS aktiviert? ggf. auf die interne NVME? Das könnte die PBS Backups deutlich beschleunigen. (https://pve.proxmox.com/wiki/Backup_and_Restore)
-
LRsync would be my choice.
-
Gi dont think this is proxmox-related at all. looks to me like he got lost and ended up on the wrong forums :)
-
HHotSauce66 posted the thread How to delegate routing between LXC in the same subnet ? in Proxmox VE: Networking and Firewall.Hello all, it's my first post here ! (let me know if I didn't do something right about posting on this forum :) Here is my setup : I have an dedicated router (ubiquiti) and a mini-pc hosting proxmox. On the proxmox, I have many LXC containers...
-
-
Bbl1mp reacted to bbgeek17's post in the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad with
Like.
In a Node Down scenario, you are left with two nodes that can still communicate directly with each other, since this is a mesh network. Additional load only becomes a factor in a Link Down scenario. In that case, depending on the topology and... -
GGilou replied to the thread PVE: VM backup to NFS share on Truenas: backup succeeds, but comment and log creation fail.And what does it look like inside dump after the failure? ls -al /mnt/pve/NAS_NFS/dump/ It is indeed quite weird.
-
Mmeyergru replied to the thread Anybody know Mellanox?.IMHO, some of the best and cheapest options may be the Intel 82599EN based NICs, like the X520-DA1 and X520-DA2. Being so old, they usually have great driver support for almost any OS (FreeBSD, Linux and Windows alike, although for Windows 11...
-
bbgeek17 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.In a Node Down scenario, you are left with two nodes that can still communicate directly with each other, since this is a mesh network. Additional load only becomes a factor in a Link Down scenario. In that case, depending on the topology and... -
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.Very informative link/post. Thank you. My takeaway: build a bigger cluster! Budget-approvers aren't going to like that answer!
-
Bbl1mp replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.Yes, but that might only happen with a routed setup, not in a broadcast setup, and should be tested before using it productive. Anyways FS switche or MikroTik (for low budget) or any other switches you have configuration experience with might...
-
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.We understand and can accept the risk of a 3-node cluster and losing a single node. Our current cluster is 2 nodes, and can function on a single node, so the risk profile is about the same. I like to run 5 nodes to have more fault tolerance...
-
Hhenkhuppel replied to the thread NVIDIA RTX 3060 GPU Passthrough - RmInitAdapter failed (0x25:0xffff:1601) on H170 Chipset.Hello, did you ever manage to resolve the issue? I am running into the exact same issue and also tried everythink you tried.
-
Ttytanick posted the thread walk_pgd_range crash pve9.1 on 6.18+ in Proxmox VE: Installation and configuration.Recently i have reported slab memory leak and it was fixed. I am having yet another issue and wondering where to write with it. Would you be able to tell me if this is the right place or should i send it to someone else ? The issue seems also...
-
Ttemplar replied to the thread Memory not returned on Windows when running ballooning..I've had problem with this: https://pve.proxmox.com/wiki/Dynamic_Memory_Management#Ballooning
-
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.Yes, that is our other option. We would have each node connect to two switches for redundancy, and separate some traffic with VLANs. I.e.: one port on each switch, for each node, for both Ceph internal and Ceph public networks. We really just...
-
Ddw-cj posted the thread PVE 9 Tasks 'hanging' when requesting task status in Proxmox VE: Installation and configuration.Strange issue I've noticed since upgrading to PVE 9. Often times a task will 'complete' very fast, as it should. The Task log at the bottom of the PVE panel shows 'OK', and the task output shows 'TASK OK' at the end, as the task has successfully...
-
-
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.The partner I spoke with kept reverting to the same argument against a mesh. Basically, they said that "using a mesh network is bad because then your proxmox node has to handle networking too instead of just focusing on serving VMs". I think...
-
Ccarles89 reacted to bobf's post in the thread Guest firewall letting blocked packets hit guest VM during fail over with Like.
That sounds like a reasonable fix. A minor delay in handoff between the nodes in the interest of security is very much acceptable. I look forward to seeing it pushed out once you get it applied and tested. Thanks!
-
Ccarles89 reacted to shanreich's post in the thread Guest firewall letting blocked packets hit guest VM during fail over with Like.
understandable, the only mitigation I can currently think of is by utilizing a hook script, but that won't catch every case in the guest lifecycle. I'll look into creating patches that resolve this problem by making the guest wait for a firewall...
-
Ccarles89 reacted to SteveITS's post in the thread Guest firewall letting blocked packets hit guest VM during fail over with Like.
Interesting, I’d have also expected firewall rules to be applied the whole time. Can access be controlled by a firewall outside Proxmox? At least for external connections… That’s our primary method though we use Proxmox firewall in a few cases...
