Latest activity
-
Llinux replied to the thread [SOLVED] Fingerprint suddenly not valid.OK, I finally stopped updating cluster.conf and got to the bottom of this! Root cause: Broken cluster comms due to orchestration replacing, not adding to, authorized_keys Seemed odd, as updating the fingerprints got the nodes talking again, but...
-
Ppink posted the thread Proxmox VE 9.1.1 with only a single ipv4, trying to make a NAT v4 for my VM/LXC containers in Proxmox VE: Networking and Firewall.Hi everyone, I brought a dedi server in the US and i have Proxmox VE 9.1.1 installed (Debain 13) so far and the issue i am trying to do is make a NAT v4 for my VM/LXC since i do have a windows VM but it's unable to access the internet and the...
-
Sstuartthebruce replied to the thread Live migration occasionally fails with QEMU assertion failure.Is there a patched version in a testing repo, or is the plan to wait for upstream?
-
Ddimante reacted to Maximiliano's post in the thread Not getting good network throughput even with LACP bond with
Like.
The VM is configured to use the e1000 drivers. Please test again with the virtio network drivers. Please note that this requires the VirtIO drivers to be installed, since you already have VirtIO drivers for the scsi controller and the hard disk... -
JJohannes S replied to the thread Rebootable Backup.Another thing to consider: A zfs mirror is NOT a replacement for a proper backup due to the 3-2-1 rule (have at least three copies, two on different media and one in another location (family members place, cloud, whatever). Right now (even with...
-
Eexaveal replied to the thread hostname of pve not resolved correctly in local network.IP is working. And also "dieter.local" is working. And "dieter.local" must be defined somewhere as valid hostname for this ip. So this must come from somwhere, right?
-
Eexaveal reacted to Impact's post in the thread hostname of pve not resolved correctly in local network with Like.
PVE does not use DHCP after setup so it's not registered in your router's DHCP lease table which it likely uses to provide you that local name resolveability. See if you can reserve a lease for PVE's ip.
-
bbgeek17 replied to the thread hostname of pve not resolved correctly in local network.Hi @exaveal , what you are trying to do - is not going to be achieved through configuration change on PVE. Your issue is with the browser/workstation/router/DNS. As long as name resolution on your _client_ works - PVE will reply to that HTTP/S... -
Eexaveal posted the thread hostname of pve not resolved correctly in local network in Proxmox VE: Networking and Firewall.Hi, I am a absolut newbie and have some - perhaps - basic questions. I have installed a proxmox server and connected to my local home network. The router is a Speedport Smart 3 device from Deutsche Telekom. All devices in the network have...
-
Ddimante replied to the thread Not getting good network throughput even with LACP bond.Ok so this server is 100% better but my other Windows server 2022 has the virtio adapter, same host here is the result there: Here is the config for this server: Any suggestions here would be greatly appreciated.
-
-
Ddimante replied to the thread Not getting good network throughput even with LACP bond.Ok, you win on that one. The change to virtio has improved it to an acceptable level now: Though I am still losing a bit on download and upload this is much better. Thank you for the suggestion. I will need to go to the rest of the systems...
-
-
Eexaveal reacted to DerekG's post in the thread Questions of a Newbie about virtualization of PBS with Like.
Reconnecting a PBS to a backup datastore, is not a simple process, it's not like connecting to an SMB/NFS share, believe me, I've done it, and even 1st time connecting to an external datastore is not a simple process because the PBS needs...
-
MMicma99 replied to the thread Install NUT directly on Proxmox VE and control guests from here.I'm in the same boat, no network card on my APC BR1500ms. I have apcuspd running on pfSense and would like to connect to it. I tried nupst on proxmox but didn't see it was snmp only. Loved the way it just questions you to build config files...
-
DDerekG replied to the thread Questions of a Newbie about virtualization of PBS.Reconnecting a PBS to a backup datastore, is not a simple process, it's not like connecting to an SMB/NFS share, believe me, I've done it, and even 1st time connecting to an external datastore is not a simple process because the PBS needs...
-
Vvirt_noob replied to the thread Proxmox inventory source: Access PVE network configuration to set ansible_host with compose.Wow, your comment helped me a lot. For me the filter was silently failing and I would still be looking for hours! Thank you!
-
Vvirt_noob reacted to Wazaari's post in the thread Proxmox inventory source: Access PVE network configuration to set ansible_host with compose with Like.
Hey, I know its very delayed, this is how I do it: plugin: community.proxmox.proxmox url: "https://proxmox.my-url.com" user: "root@pam" token_id: "terraform" token_secret: !vault | $ANSIBLE_VAULT;1.1;AES256 3035xxx...
-
Ddeebsr reacted to Lukas Wagner's post in the thread Cross cluster migration should have option to automatically re-VMID to range config on target cluster with Like.
It's something that we are already planning to fix, but I cannot provide an ETA at the moment.
-
FFred13320 replied to the thread Proxmox VE 9.1.1 – Windows Server / SQL Server issues.I used x86-64-v2-AES then host (XEON GOLD 5515+) This setting didn't improve sql response time but I keept "host" as setting
-
RRaudi replied to the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation.Ich verstehe es nicht, ich habe eigentlich alles so gemacht wie in der Doku angegeben, aber der Treiber wird nicht geladen... Ein recht blankes neu installiertes System mit aktuellen Updates und dann folgendes: apt install build-essential...
-
JJona17 posted the thread Kann ich eine VM über den HDMI Port meiner Hardware wiedergeben? in Proxmox VE (Deutsch/German).Hallo, ich bin jetzt schon ein wenig länger auf der Suche, nach einer Lösung für mein Problem. Ich habe hier ein Intel Nuc stehen, auf dem laufen 2 VM, aber ich würde gerne die eine VM über den HDMI Port des Intel Nucs ausgeben. Ist das möglich...
