Latest activity
-
UBelow are the performance results for 1GB vs. 10GB Ceph on a Windows VM. I have two servers with one HDD and two Transcend 220s 240GB SSDs on each server, and I do not understand these performance results.
-
-
BBadej replied to the thread How to use "custom actions" for filtering incoming-emails to specific address?.You're welcome. If the sender's addresses are on the recipient User Whitelist (welcomelist), this rule won't work.
-
gurubert reacted to spencerh's post in the thread Unattended install of Ceph using pveceph with
Like.
I believe that is what I was referencing in my original post: I ended up just going with figuring out what packages are installed by pveceph install and installing those directly using apt. -
PPhips replied to the thread Lack of WebAuthn 2FA for OpenID Users.I would say that depends on your setup. Some environments for example see "trusted devices" as second factor. If we are speaking about M$ environments it is often enough to protect with Windows Hello and a PIN. Your PIN is then replacing your...
-
gurubert replied to the thread Difference between Ceph already integrated into Proxmox and installing Ceph externally.If you need more than RBD (block storage) and CephFS (file storage) from your Ceph cluster you should look into not deploying it with the Proxmox tools.
-
HHikari0110 posted the thread Why i cant install WinSever 2012 R2 its keep let me install again and again in Proxmox VE: Installation and configuration.This is my hardware information: After install and restart its appears this and i cant enter
-
-
gurubert reacted to bbgeek17's post in the thread Proxmox 9 with shared LVM on iSCSI problem with Like.
VMware enables this behavior because it has VMFS - a cluster-aware, shared filesystem. VMFS implements proprietary on-disk locking and reservation mechanisms that safely coordinate multi-initiator access to the same disk. Proxmox does not...
-
gurubert reacted to bbgeek17's post in the thread Proxmox 9 with shared LVM on iSCSI problem with Like.
You cannot have Shared storage in a two node non-cluster installation. Shared storage, as defined by PVE terminology, is part of the cluster. Everything you do after that is a road to data corruption. There are coordinated operations...
-
gurubert reacted to Lukas Wagner's post in the thread Cross cluster migration should have option to automatically re-VMID to range config on target cluster with Like.
It's something that we are already planning to fix, but I cannot provide an ETA at the moment.
-
Nness1602 replied to the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes.For stable cluster CEPH is the only way to go.
-
DDustn replied to the thread PCI Passthrough Arc A380 Into VM.Hey! Sorry to bump this. I have a question, especially to @thatgermandude If u check for lspci -nnk | grep -A3 -E "VGA|Display" on the VM does it need to show i915? Or vfio-pci? I am not sure if I got it to work 100% since whenever I check for...
-
aaron replied to the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes.With PVE on a shared LUN you use LVM to split it up. That is a block storage. See https://pve.proxmox.com/wiki/Multipath that also touches the final setup after multipathing (which you will usually have in such setps). No, that is a complex... -
gurubert replied to the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes.We are running a cluster of 8 Proxmox VE nodes with OCFS2 on a SAN LUN since several years. It works but it is not officially supported. There were some issues even with OCFS2 in recent kernels as the development of OCFS2 seems to have come to a...
-
CChrisTG74 replied to the thread How to use "custom actions" for filtering incoming-emails to specific address?.Thanks, does this respect the "welcome"-list, so that sender-addresses noted there will bypass?
-
Bbazigan posted the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes in Proxmox VE: Installation and configuration.Hi everyone, I’m trying to understand how Proxmox handles shared block storage compared to VMware VMFS, and I’d like to ask for some clarification or best practices. In VMware, VMFS allows multiple ESXi hosts to mount the same LUN...
-
Llifeboy posted the thread acme.sh plugin version and troubleshooting in Proxmox VE: Installation and configuration.I'm running pve 8.4.16 and want to renew my LE certficate using dns_miab, but I get an error after the TXT record has been validated. "TASK ERROR: validating challenge...
-
fiona replied to the thread Bug Report: Realtek 2.5Gbps Ethernet downgraded to 100Mbps with kernel 6.17!.For reference: https://bugzilla.proxmox.com/show_bug.cgi?id=7237 -
fiona replied to the thread Cannot snapshot VM - VFIO migration not supported.Hi, migration with noVNC clipboard will be supported in an upcoming qemu-server release, under the condition that the machine version of the VM is at least 10.1. It's already applied in git, but it's not packaged yet.
-
MMrMojoe replied to the thread [SOLVED] Netzwerkseparierung mit SDN keine Verbindung zum Gateway.Halli Hallo, ersteinmal Entschuldigung für den, mittlerweile, dreifachen Post. Aber ich kam dem Fehler nun wohl endlich auf die Schliche. Ich hab mir nochmal, die Netzwerkschnittstellenkonfigurationsdatei "/etc/network/interfaces" angeschaut...
-
OI fixed it. 1. Use the command lsblk -f to locate the vfat partition. 2. Run proxmox-boot-tool init /dev/XXX (Replace /dev/XXX with your actual partition. In my case it was /dev/sda2). 3. Run proxmox-boot-tool refresh. 4. Run...
