Latest activity
-
BBobhWasatch replied to the thread PVE Cluster time sync questions.The command "chronyc sources" will show what sources it is synced to, or if it is not synced. Example output: ~$ chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample...
-
Bbastae posted the thread Intel_Idle C-States in Proxmox with Intel Series 200 CPUs in Proxmox VE: Installation and configuration.Hi everyone, I’m looking for experiences or insights regarding CPU C-States on Intel Core 200 Series CPUs, specifically the Intel Core Ultra 245K. My setup: CPU: Intel Core Ultra 245K Mainboard: Gigabyte B860M DS3H OS: Linux (PROXMOX)...
-
PPorencephaly13 replied to the thread Debian 13 LXC MTU always set to 1500.I'm on PVE 9.0.10 and just ran into the exact same issue. As syslinux said above, I created a Debian 13 lxc with a single net0 interface first. After the container was created, I later added an additional interface net1 with MTU set to 9000. It...
-
Ss25a replied to the thread New Mainboard Supermicro X14SAV / No Installation possible.Hi again, after a tests I found out that: cat /sys/devices/system/cpu/cpu0/cpuidle/state*/name POLL C1_ACPI C2_ACPI C3_ACPI I see only the C1 - C3 Power states. I checked the Bios and found one setting (C-States Limit) which I changed from...
-
Nneatrasm replied to the thread [SOLVED] AMD RX 7800/9070 XT vendor-reset?.People are making expensive mistakes because that information is not explicit. The 5070 is twice the price. Naturally people will seek to buy the AMD GPUs. Am I in a situation where I have to unload this hardware because the official...
-
DDaniel82 replied to the thread Verständnisfrage wieso der SSD Speicher bei neuer Proxmox Installation nicht vollständig genutzt wird.War bei meiner damaligen Proxmox Installation, wo ich nicht weiss welche Version das war, auch nicht der Fall. Daher wundert mich das ja, da ich bei der Neuinstallation mit dem neusten Installer nix anders gemacht habe. Naja werde morgen mal ne...
-
Gg4m3r7ag replied to the thread nVidia driver install error.I pinned the older Kernel because that is what the Proxmox documentation I linked to advises to do. I found that documentation after I started troubleshooting the driver install failures trying to find a solution as I was already on the 6.17...
-
Nneatrasm replied to the thread Default vmbr1 not connecting to VMs.There are two networks. Internet and Management. To change the CCTV IP I need 192.168.1.x, but I don't use that address space normally. I simply swapped the wires to make things simple, so I can use windows to run the software to change the...
-
Tt.roloff replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.ipconfig /all on windows VM arp -a
-
-
FFunar posted the thread S3 Storage via CEPH RGW & cache datastore? in Proxmox Backup: Installation and configuration.I'm curious about the cache disk for S3 storage. We're experimenting with S3 storage in PBS utilizing CEPH's RGW. CEPH being local to the PBS sever. Is there a way to calculate how much storage the datastore used for cache needs to be? We...
-
Tt.roloff replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.I see that the bond/LACP config may be something which could cause problems. But if so, I would expect all VMs connected to vmbr0 to have trouble.
-
Iikus060 replied to the thread chattr -R +P -p 49 fails in unprivileged LXC after PVE 8→9 upgrade (project quota enforcement).Before any body ask. projectquota is enabled on the pool. $ zpool get all rpool | grep project rpool feature@project_quota active local And xattr is also enabled on the dataset. zfs get all...
-
Rrdfamily posted the thread PVE Cluster time sync questions in Proxmox VE: Installation and configuration.I have a 3 node cluster and modified the chrony.conf file on all the PVEs to use the "x.us.pool.ntp.org" servers. I restarted the chronyd dameon on all and still have a time difference of 3 mins on the third PVE from the 1st & 2nd. how can i...
-
Dds88284 replied to the thread Open with PVE UI adds wrong port at the end.Thank you for the response! I actually found the answer in this forum: https://forum.proxmox.com/threads/suggestion-for-open-in-pve-ui-option.171881/ I was able to go in and change the UI URL directly, which fixed my issue.
-
Iikus060 replied to the thread chattr -R +P -p 49 fails in unprivileged LXC after PVE 8→9 upgrade (project quota enforcement).@drwadu After some digging, I notice the problem also occure on the host. Trying to execute chattr -p +P 49 /rpool/data/subvol-120-disk-2/foo-bar is also failing. chattr: Operation not supported while setting project on...
-
DDaniel82 replied to the thread Verständnisfrage wieso der SSD Speicher bei neuer Proxmox Installation nicht vollständig genutzt wird.Ja sehe ich.
-
-
Tt.roloff replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.Not yet. But we tried different type of NIC (Realtek) with same behaviour.
-
BIch würde wie oben erwähnt ZRAM einrichten und bei Bedarf swappiness anpassen. Du kannst deine Theorie ganz einfach testen indem du den SWAP mit swapoff -a deaktivierst. Alles weitere ist bereits verlinkt und gesagt.
-
Tt.roloff replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.Believe it or not, ping startet working all of a sudden (VM was running ~6 hours). But after rebooting, network connectivity is lost again.
-
bbgeek17 replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.You've already established that the bridge and underlying network works correctly, at least partially. The two main differences are VLAN numbers and type of the NIC. Have you tried to move your Windows guest to the same VLAN as a known working...
