Hi @PelikanNetzwerk , welcome to the forum.
Generally users have reported success using vanilla Debian to bootstrap on iSCSI and then installing PVE on top of it.
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_13_Trixie
There are a...
I have prepaired an iSCSI/Lun onto my SAN. The Server BIOS is configured to boot from that LUN. Thereafter I would like to install Proxmox to the Boot/LUN. But Proxmox seems to be not ready to do that Job. There are show only the lokal Harddisk...
Cheers, I think that's enough for me as I can:
1. Give each server their own token to use (for revokation purposes)
2. Restrict permissions separately on a per-token basis as well (e.g. different servers can use different tokens, with some...
So langsam kommen wir ja der Antwort näher :cool:
cat /sys/kernel/slab/kmalloc-rnd-03-4k/aliase
echo 1 > /proc/sys/vm/drop_caches;echo 2 > /proc/sys/vm/drop_caches;echo 3 > /proc/sys/vm/drop_caches;slabtop -o
Der zweite Befehl löscht einmal...
Thanks, that makes sense.
It's not optimally configured; PBS running in a VM on one of the hosts, backing up to a NAS. Research suggested it was workable if I was able to add in a tmp dir, but I now assume that each host that is going to back...
We've not upgraded yet so I don't have all the answers.
Per other posts I think the intent is to not leave nodes on different versions long term. So if you have only 1/2 upgraded I don't know if maintenance mode is supposed to work. You could...
Cheers, I think that's enough for me as I can:
1. Give each server their own token to use (for revokation purposes)
2. Restrict permissions separately on a per-token basis as well (e.g. different servers can use different tokens, with some...
You already can use API tokens to get a dedicated ID and secret to use on each PVE (or other use site) if you want to use a single user.
See https://pbs.proxmox.com/docs/user-management.html#api-tokens
Hello! I have been running into some issues backing up a larger server, so I mounted a spare disk and asked vzdump to use it as a temporary directory
pbs:/# cat /etc/vzdump.conf
tmpdir: /mnt/pbs-datastore
but PBS doesn't seem to pick up that I...
@fstrankowski: Ja 3x OVS Bridges, 2x davon in Benutzung & eine Linux Bridge. Diese Setup habe ich seit ich mit Proxmox angefangen habe.
Ausgabe um die niedrigen Werte gekürzt, da ich das Zeichen Limit gesprengt hab.
Ausgabe slabtop -o:
Active /...
Irgendwo werden bei dir knapp 65 GB RAM für das System verwendet (62GiB Slab). Wie ist dein Netzwerk aufgebaut? OVSwitch?
Gib mal bitte während alle VMs aus sind:
slabtop -o
Aktuell hab ich als Gateway eben nur die Fritze und mit den von dir genannten Sachen keine Erfahrung. Ich dachte mir, naiv wie ich wohl bin, das dass über das SDN und ein paar Firewallregeln über Iptables doch ganz gut funktionieren sollte. Da...
@fstrankowski Dein Befehl hat ein paar Bugs. Es zählt Snapshots mit, die Werte sind nicht in MB, und das sum/1024 am Ende ist unbenutzt,
Hier eine Version (die vermutlich auch Bugs hat) mit ein paar persönlichen Anpassungen/Simplifizierungen...
@Impact Das mit dem Speicher Leck vermute ich, aber ich habe echt keine Ahnung wie man das hier findet. Aufgetreten ist der Fehler zum ersten Mal am 06.01.2026, das Upgrade auf 9.1 habe ich Mitte Dezember gemacht, daher muss das eigentlich mit...
Hello buba, as you noticed, the issue is not that Proxmox “doesn’t detect” the network.
You have vmbr0 set as VLAN-aware with:
You didn’t mention whether you are using a managed switch or how the physical switch port is configured.
If the...
I turned off hardware offloading after I started diagnosing the problem. Most of the posts dealing with similar issues recommend this. I have tried with offloading enabled and disabled but outgoing bandwidth is still the same at around only...
Deine Maschine hat 67GB genutzen Ram obwohl alle VMs heruntergefahren sind? Du hast irgendwo ein anderes Problem am System. Das ist nicht normal und dafür muss und wird es irgendwo eine Erklärung geben.