Latest activity
-
Rreinob replied to the thread Enable DNS cache.@danielgoepp, I guess you could also install dnsmasq or unbound on your PVE nodes, but the idea is that the nodes should run proxmox as-is, and anything else should run elsewhere (or in VMs/containers). You could set-up a caching unbound...
-
Ooogzz replied to the thread ESXi → Proxmox migration: Host CPU vs x86-64-v4-AES performance & 10 Gbit VirtIO speeds.As you said, the problem seems to stem directly from VBS being activated. I don't understand why Host is still recommended in Best Practices; it confuses me. VBS is not active on x86-64 and it runs very fast. Even if I enabled Nested-Virt, the...
-
RR0cc0Naut replied to the thread kein GUI nach update auf V9.bin jetzt mal auf den Kernel 6.8.12-17-pve zurück, der war noch installiert. Alles wovor pve8to9 nun noch warnt sind die 209 updatebare Pakete die aber von apt zurück gehalten werden. Wie gehe ich nun am besten weiter vor um das System wieder...
-
Nnpr replied to the thread PVE backups causing VM stalls.A few days later, I can say that the solution... did not work. I still see stalls, just slightly less frequently now. Just trying things out, I appear to have identified NFS as a cause / requirement. When you send backups to a remote file...
-
fiona replied to the thread Debian 13 guests freezing on reboot.Hi, please share the VM configuration qm config ID with the numerical ID as well as the system logs/journal from within the guest around the time of the issue. -
fiona replied to the thread Solution for "The repository 'http://download.proxmox.com/debian/pbs-client trixie InRelease' is not signed" error.Hi @DannyElfman , are you sure you are have already upgraded to Debian 13 trixie/Proxmox Backup Server 4.x? Otherwise, it's expected that the command is not yet available. If you would like to upgrade, see the guide...
-
Mmolotch replied to the thread ZFS+VM/LXC disk performance benchmarking, part 2 (ZFS in VM=very slow?).I'm running a VM with the disk in a ZFS pool on a single SSD and it's very slow compared to the pool mounted through virtiofs. I just did a simple test using: dd if=/dev/zero of=/tmp/tempfile bs=1M count=1024 conv=fdatasync Performance is 35...
-
Rreinob replied to the thread Proxmox Port 443 öffnen.Da kann ich leider nicht weiter helfen. Wenn das Programm (in der VM) auf eine externe Bank zugreifen kann, gibt es keinen Grund, warum es nicht auch eine Verbindung zu einer anderen externen Bank herstellen können sollte (es sei denn, ihr habt...
-
PPLHMK posted the thread Error: "Couldn't find EFI system partition" when update in Proxmox VE: Installation and configuration.Hello, When I update my version : "Manager Version pve-manager/9.1.4" I get the following error: "Couldn't find EFI system partition. It is recommended to mount it to /boot or /efi. Alternatively, use --esp-path= to specify path to mount...
-
Ich habe mich in den letzten Tagen intensiv mit Proxmox MG beschäftigt und fand die Anleitung nicht immer hilfreich. Mein Spam wird um 90% reduziert, dabei möchte ich hier erklären, was ich ggü. der Out of the Box Installation verändert habe, um... -
XXoxxoxuatl replied to the thread Geringe Lese-Performance mit iSCSI und Dell ME5.Jeder Server-Port kann Jumbo Frames an jeden SAN-Port im selben vLAN senden.
-
root@kharkov:~# lshw -short H/W path Device Class Description =========================================================== system XPS 8960 (0BC0) /0... -
Ppcnr replied to the thread Slow backup of Proxmox VMs.Hi Steve, thanks for your reply PBS is on an HDD, the VM i tried to backup is on a SSD The destination is an HDD connected via USB 3 I'd like to understand if the issue is a problem or a misconfiguration of the Proxmox host, or if the problem is...
-
HHaelSturm42 reacted to leesteken's post in the thread Why do bind mounts prevent snapshots? with
Like.
A work-around is to not use bind mount points but add lxc.mount.entry: /directory/on/host directory/in/container none bind,rw 0 0 to the container configuration file. Then you can do snapshots and the mounted directory is exempt and ignored. -
RRaudi replied to the thread [SOLVED] Emulator in Windows VM will nicht....Ja genau, das wundert mich auch. Den WinUAE habe ich nicht aktuell, da habe ich Jahre lang nichts geändert, denn da hatte ich mit vielen Version und Funktionen getestet und hatte immer Probleme, dass die Maus im Konsolen-Fenster nicht...
-
Mmuekno replied to the thread [SOLVED] difference between host screen and effective IP.I like to upgrade to 9.x, but PVE8TO9 complains abaut the 172.16.1.117, INFO: Checking if resolved IP is configured on local node.. FAIL: Resolved node IP '172.16.1.117' not configured or active for 'pve' How to resolve this? Need help or hint
-
Tthorsten.franke replied to the thread Hohe SWAP Auslastung.Ich werde es versuchen.... und berichten. Seit einiger Zeit ist der Windows 2019 Terminalserver auf dem System ziemlich langsam. Ich denke, dass das auch mit ein Grund dafür ist. Vielen Dank für die konstruktiven Antworten.
-
Mmuekno replied to the thread [SOLVED] difference between host screen and effective IP.No, no change
-
Ggfngfn256 replied to the thread ZFS Pool Error remains after replacement of Disk.Assuming this is the only file that appears corrupted, you could possibly try the following: apt-get install --reinstall pve-qemu-kvm
-
UdoB replied to the thread Hohe SWAP Auslastung.Setze "swappiness" auf Null. https://pve.proxmox.com/wiki/ZFS_on_Linux#zfs_swap - auf derselben Seite wie bereits oben verlinkt. Allerdings würde ich das nicht machen, sondern eine kleine Menge präsent lassen. Das basiert lediglich auf meiner...