Latest activity
-
GGMBauer replied to the thread Proxmox alle ca zwei Wochen nicht erreichbar.Ja, schon klar... Mir hat es eigentlich schon gereicht, wie ich auf die Logs geklickt habe und dann erfuhr, dass die 2486 Werbe- und Contentpartner der dortigen Seite gerne mitlesen würden. Ich werde da nicht draufklicken, deswegen der Verweis...
-
Ggeekdot replied to the thread Help! My Proxmox server is not booting anymore ;-(.Well, I think there are 2 arguments speaking against it: 1) a 300+ lines long return of debsums -s incl. libc6, libglib, some Perl- and Python-modules :oops: 2) The NMEe's brand is "FIKWOT"... replace one vowel at will ;) (.... I was young a...
-
Mmasteroc replied to the thread [HELP] Proxmox 9 – Intel iGPU not binding driver and not exposing /dev/dri/renderD128.For anyone who comes along and has a similar issue: I had to remove the "nomodeset" from /etc/kernel/cmdline Then i915 finally was visible to my host when it started up
-
Nostalgie... :) http://www.cosmos-bbs.de Sowas kennen die Leute von heute überhaupt nicht mehr, dass man so früher kommuniziert hat... -
EllerholdAG replied to the thread ESXi → Proxmox migration: Host CPU vs x86-64-v4-AES performance & 10 Gbit VirtIO speeds.For CPU type use "Epyc Genoa". In my tests (weve got the 9174F) this was the fastest of all tested CPU types. -
TThat's... not good, it is worst case! I would give it max. 14 cores and call it a day. Of course: ymmv. You have the hardware available --> just test it ;-)
-
Cchielmi replied to the thread Trouble with kernel 6.17.4-2-pve.https://forum.proxmox.com/threads/please-help-proxmox-not-booting-after-upgrade-to-9-1-4.178729/ Same issue reported by several others. All (including me) use a Dell system... Pinning the kernel to an older version fixed it for me. Instructions...
-
Ddanazz replied to the thread !Please help! Proxmox not booting after upgrade to 9.1.4.Sorry, false alarm. It was a power failure...
-
news replied to the thread ZFS Pool Error remains after replacement of Disk.Hello, replace these files with your backup files and your good. -
IITT replied to the thread Terminalserver unter PVE langsam.Ich hoffe, ich darf das verlinken: HPE Workload profiles and performance options
-
SScheme replied to the thread [Suggestion] Let VirtIO-GPU support max_outputs..Did you ever get setting up multiple monitors to work correctly? It's been a bit of a pain point for me and I don't want to use spice
-
MMarvinE replied to the thread SDN OpenFabric set MTU?.I added mtu only to /etc/network/interfaces seams to work. iface ens3f0np0 inet manual mtu 9000 iface ens3f1np1 inet manual mtu 9000 iface dummy_40G mtu 9000
-
Dds88284 replied to the thread Open with PVE UI adds wrong port at the end.Hi @bbgeek17 , thank for the welcome. I know that 8006 and 8007 are the correct ports, but I'm trying to remove them from being added at the end of the url when clicking "Open in PVE UI". It is either I create the connection using IP (ex...
-
THallo Zusammen, habe eben festgestellt, dass der Swap ziemlich ausgelastet ist. Habe eigentlich mehr als genug RAM installiert und trotzdem ist die Auslastung ziemlich hoch. Hab 192 GB RAM in der Mühle und es laufen nur 2 VM's auf der Node. Die...
-
-
MMasterMark posted the thread ZFS Pool Error remains after replacement of Disk in Proxmox VE: Installation and configuration.We had an issue with one disk of our ZFS-Pool. The disk was changed, pool resilvered all fine. Two errors are still remaining: root@pve1:~# zpool status -v pool: rpool state: ONLINE status: One or more devices has experienced an error...
-
Ttotae replied to the thread Guidance Needed to Improve Sync Performance on 10 Mbps Link.Hello Falk, This config sync job. (example job) Log last sync. ProxmoxBackup Server 4.0.16 Search (remote) store, remote, id, owner, direction () 2026-01-11T23:00:00+07:00: Starting datastore sync job 'PBS-DR:backupdr:me:DMZ:Sync-DMZ-to-DR'...
-
-
Ggregorywannabe replied to the thread Proxmox VE 8.1 don't boot, only boot when monitor attached.Running Proxmox v9.1.4 on 8 nodes (all NUCs): DN2820FYK NUC11PAKi5 NUC10i3FNB NUC8i7BEH NUC8i7BEH NUC8i7BEH NUC10i5FNH NUC8i5BEH and only had this problem on the last one, a NUC8i5BEH. Would only boot with a monitor attached. Fixed by adding the...
-
Ffalanca posted the thread Bug Report: Realtek 2.5Gbps Ethernet downgraded to 100Mbps with kernel 6.17! in Proxmox VE: Networking and Firewall.Hello everyone, This post informs users experiencing this type of issue, as well as developers. I'm using PVE 9.1.4 no-subscription repo with kernel 6.17.4-2. I recently realised that network connection downgraded to 100 Mbps. TLDR: 6.17 kernel...
-
ZZlobniy Shurik posted the thread Nested virtualisation, Proxmox nodes crash in Proxmox VE: Installation and configuration.In my home lab I use nested virtualisation. Host machine (Fedora 43, kernel 6.18.2, Virtual Machine Manager, KVM): Ryzen 9900x/Asus Prime X670-P-CSM DDR5 ECC RAM 192Gb dedicated 500Gb SATA SSD Samsung 870 (ext4) - for Proxmox VE node system...
-
bbgeek17 replied to the thread Open with PVE UI adds wrong port at the end.Hi @ds88284 , welcome to the forum. Ports 8006 and 8007 are the correct ports for Web GUI of PVE and PBS. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
