Ich halte das gern simpler, da gibts bei Umgebungen wo es kein oder schlechtes Monitoring gibt, einfach ein Quota auf X TB auf dem Pool. Bei manchen 80% oder auch mal 95%. Ist immer Umgebungsabhängig.
Ich halte das gern simpler, da gibts bei Umgebungen wo es kein oder schlechtes Monitoring gibt, einfach ein Quota auf X TB auf dem Pool. Bei manchen 80% oder auch mal 95%. Ist immer Umgebungsabhängig.
You may be right about the Kingston Furry, because I've had the same problem more than once, but the strangest thing is that this is my third GMKTEC K12 mini PC, and this configuration works in the others, only in this model it didn't.
But never...
Noch ein Hinweis, zfs benötigt frei Blöcke, wenn die alle aufgebraucht wurden, kann man sie nicht mehr löschen.
Insbesondere, wenn man zfs-auto-snapshot o.a. Tolls verwendet, um automasch ein zfs snapshot zu erstellen,
Kann es passieren, dass der...
I understand that you've already resolved your issue. Just to address this question ^ , you seemed to have had access via SSH. You can do everything via CLI, including VM backup.
Cheers
Blockbridge : Ultra low latency all-NVME shared storage...
Hi Alex,
Thank you so much for sharing this workaround. I followed your instructions and it’s working now!
I’ll keep an eye out for the new BIOS release from Supermicro, but for now, your guidance has solved the problem.
Default ist recordsize=128k, Mann und Frau gehen heute zu recordsize=64k über.
It depends, anhand der realen Daten kann man da schon viel mehr optimieren.
openzfs ist dein Handbuch, die Version findest Du über zpool version.
@tomachi , while we can try to infer that you are asking for help, technically your post reads as a statement. There is no reference as to what you are trying to do and why.
Where is your image located (pwd; ls -al vm-201-disk-0.qcow2) ? Is it...
Hello, I’m having an issue with cloning a template from one node to another. I have a cluster set up and a shared disk added (I’ve tried SMB, NFS, iSCSI), and the templates are stored on it. However, when I try to clone them to the other node, I...
Wenn du keine Erfahrung hast mit ZFS, dann nutze die Proxmox defaults.
RaidZ ohne Special Device ist schon spürbar langsamer beim schreiben, aber beim Backup begrenzt da der Compression Speed der CPU mehr.
Wenn du keine Erfahrung hast mit ZFS, dann nutze die Proxmox defaults.
RaidZ ohne Special Device ist schon spürbar langsamer beim schreiben, aber beim Backup begrenzt da der Compression Speed der CPU mehr.
Habe mit ZFS keine Erfahrung. Hast da einen Best Practise Guide irgendwo? Muss ich da noch was einstellen?
z.B.
compression=lz4
atime=off
recordsize=1M
xattr=sa
Ich würde ein hardware raid-1 machen fürs OS. Und dann 8x NMVe als raid-z2
Wenn...
Only the first PCIe x16 slot and the first M.2 slot (which is like PCIe x4) are usually connected to the CPU and can be used for PCI(e) passthrough. What makes you think the second slot will put a GPU (or other PCIe device) in a separate IOMMU...
In the manual of the ASRock B550 PG Riptide is written, that 3 PCIe are connected to the CPU.
Is this electrical possible with B550?
If yes, then I maybe give the board a try .....
Sorry @Impact
I was writing my reply as yours came in.
I did try a second backup, but it was still crawling the entire 2TB of that folder, even if it didn't upload anything to the PBS. The Only way I could exclude it was to take the folder...
Natürlich mit ZFS und ZFS RAID ging schon vor Ewigkeiten stabil mit Solaris.
Bei RaidZ nehme ich immer 2 kleine NVMe als Special Mirror. Bei kleinen Setups Mirror.
Bei XFS nehme ich alles default + noatime. Aber Ext sollte auch gehen, war bei...
You may be right about the Kingston Furry, because I've had the same problem more than once, but the strangest thing is that this is my third GMKTEC K12 mini PC, and this configuration works in the others, only in this model it didn't.
But never...
Okidoki... nachdem ich den Python cache geleert hatte, lief ifup etc. wieder... aber das zeigte vermutlich nur ein Symptom.
Die Ursache ist höchstwahrscheinlich mein NMVe.
Auch wenn smartctl ein "PASSED" und no errors logged von sich gibt, sind...
Just a heads up on this backup issue.
After a couple of days of digging into the fault, I found that I could exclude the offending folder (meilisearch) from the backup, but then the app wouldn't start after restore. So the dev made a change to...