Latest activity
-
Tthomsa replied to the thread Proxmox alle ca zwei Wochen nicht erreichbar.Meinst du wirklich es liegt an der nic? Ssd selbst ist eine m2 ... Die ist direkt im Mainboard eingesteckt. Da ist kein Kabel. Also lieber Mal ne andere SSD probieren? Könnte ne m2 SATA Samsung Evo 860 bekommen. Habe mir den think Client...
-
GGMBauer replied to the thread Proxmox alle ca zwei Wochen nicht erreichbar.Auch wenn ich keine Sekunde verstehen kann, wieso man einen ThinClient für Proxmox kauft. Die Besitzer dieser Geräte sind die ersten, die sich dann beschweren, dass die Kiste so langsam läuft. Bis zum Beweis eines Gegenteils sag ich jetzt mal...
-
HHellYeah1994 replied to the thread VirGL hardware accelerated h264/h265.Hi all, looks like it's not working in the latest version. I built virglrenderer (main) and pve-qemu (10.1.2-5). vainfo shows all VAProfiles correctly on the host but none in the guest. General OpenGL acceleration works. Guest: Ubuntu 25.10...
-
Mmuekno posted the thread [SOLVED] difference between host screen and effective IP in Proxmox VE: Installation and configuration.My PVE host shows http:// 172.16.1.117:8006/ an address from DHCP range. but this address is not even pingable. The effective address is 172.16.1.72, wich is pingable and reachable with ssh and the Browser on port 8006. Everything running fine...
-
Yyangsm replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.@t.lamprecht does the crimson osd available to test out?
-
CMy solution was to define a new CPU model based on x86-64-v2-AES that also exposes AVX New models can be defined here cluster wide: /etc/pve/virtual-guest/cpu-models.conf Add this definition to the /etc/pve/virtual-guest/cpu-models.conf file...
-
Jjanus57 replied to the thread Backup fails when (additional) container disk is on ZFS ZVOL.Hi, in the bugzilla, links are present on all pages at the end of the forum : Which leads to : https://bugzilla.proxmox.com/ Or even in the manual : https://pve.proxmox.com/pve-docs/pve-admin-guide.html#getting_help Best regards,
-
-
EEtienne Charlier replied to the thread Bonded ethernet uplinks broken in pve-common 9.1.1.I deployed a new cluster ( 2 nodes for now, qdevice soon) # Package version proxmox-ve: 9.1.0 (running kernel: 6.17.4-2-pve) pve-manager: 9.1.4 (running version: 9.1.4/5ac30304265fbd8e) proxmox-kernel-helper: 9.0.4...
-
Yyummiweb replied to the thread Backup fails when (additional) container disk is on ZFS ZVOL.Update: The problem I described (which I observed on several different hosts) has since disappeared. I can't say whether it was fixed by a recent PVE update. If anyone from the team is still reading this: I find it somewhat inconvenient that...
-
Cczerepsky replied to the thread Proxmox Ver 8.x installation on HPE Gen11 server.thanks for detailed answer! I will try do it the same way but tbh I’m not sure if it will help due to bios and ilo firmware is the newest one and I also installed the newest one SPP for this server. About disc I’m using 4x iron wolf pro 16Tb and...
-
Bbrightrgb replied to the thread [SOLVED] I need help setting up double gpu passthrough.It's really crazy. The MSI B550-A Pro seems to be the only board that has two PCIe slots connected to the CPU and not End Of Life. Unfortunately, for some reason, the MSI doesn't support ECC. :( I'd even be happy with a second PCIe slot, even...
-
Ggusto replied to the thread Very slow creation of LXC (Proxmox 9).Sorry, yes, that was a question. However, I tried to create LXC several times. Sometimes it takes 50-70 seconds until LXC starts. Today I tried again and LXC was created and started in 10 seconds (like in the old days). Here is the script how I...
-
UdoB replied to the thread verification questions.It is especially the technical readability of the data chunks from the physical disk which is confirmed by this process. (And then to be sure that the read data is actually correct the checksum is used.) -
THATS the option! i had a feeling i saw that in the past, but was looking in the wrong menu and couldnt find it mentioned to it in the docs again! raw PBS performance seems to run around 250MB/s max from the host, which is about what i'd expect...
-
WWichtelmann007 replied to the thread [SOLVED] LXC mit ioBroker startet nicht mehr.danke, du bist mein Held! Sorry für die fehlende Formatierung...
-
WWichtelmann007 reacted to Impact's post in the thread [SOLVED] LXC mit ioBroker startet nicht mehr with
Like.
@maze-m Die fehlende Formatierung sorgt zwar nicht für viel Motivation das Problem genauer anzusehen, aber das ist kein IOBroker oder LXC Problem. @Wichtelmann007 /etc/pve/status.cfg ist miskonfiguriert. Leere die Datei mit echo >... -
FHallo, mir ist das Problem nach einem Upgrade auf 9.0.1 schon einmal aufgefallen. Nach einem PVE Reboot war es aber verschwunden. Und da ich fast immer via ssh arbeite, habe ich es dann zunächst auch nicht mehr bemerkt. Jetzt habe ich auf 9.1.4...
-
Falk R. replied to the thread SSD Backup mit ddrescue: Dateien wieder zurückspielen?.Naja, wir sind im deutschen Forum und wenn da Leute in Englisch abdriften, kann man gerne auf deutsch zurück gehen. Aber gern in einem neuen Thread. -
Falk R. replied to the thread Performance Probleme.Ich nutze NVMe in der Regel ohne RAID und auf den PBS mit NVMe macht beim Benchmark die CPU dicht bei Werten zwischen 20-100 GB/s je nach Modell. Aber ich nutze auch fast nur noch AMD Server. Solche Benchmarks sind eh synthetisch und in der...
-
Qqhash replied to the thread WTR Pro CPU throttling.I know. I just want low power use and simplicity... maybe an option is to buy another WTR box. Then one can be used as a bare metal NAS and the other to host VMs. The latter can also have an added backup in it :)
