Latest activity
-
EEideen replied to the thread Proxmox 9.0.4 doesn't get IP by DHCP.Adding dhcpcd + "allowinterfaces vmbr0" in /etc/dhcpcd.conf does work, but pve is dependtend on isc-dhcp-common isc-dhcp-client so you can't remove them.
-
Jjohn.gonzalez replied to the thread Uploading ISO's to a different server in the cluster fails..Thanks @Michiel_1afa it works.
-
KKingneutron reacted to DerekG's post in the thread USB to SATA causing proxmox to crash after write with
Like.
I guess you know that USB connected drives can be temperamental in ANY server system, that's why they are not recommended. You might be better off setting up the USB drive as a networked share and then bind mounting the share into the LXC, that... -
KThe Apple Mac Pro website specified that it's up to 3000 sequential but you are testing random/IOPS. If you want high sync writes (for fsync/sec like 10000) then use a drive that has PLP. Consumer drives are typically between 50 (which is like a...
-
KKingneutron replied to the thread Problems in restoring LXCs backups from proxmox 8.4 to 9.1.You should consider moving your Dockers from LXC to VMs, docker under LXC is not recommended by proxmox and there have been multiple reported issues after upgrades. https://pve.proxmox.com/wiki/Linux_Container
-
Jjohn.gonzalez reacted to Michiel_1afa's post in the thread Uploading ISO's to a different server in the cluster fails. with Like.
This is a bit of a meh.. issue easy to work around, but would be nice to find out whats going on. Affects: at least PVE 8 & 9 - exact patch version does not matter. - File size in this case does not matter, happens with any size image...
-
KKingneutron reacted to aaron's post in the thread [SOLVED] Understanding VM backups and behavior on ZFS with Like.
I assume this is a Linux guest right? If you run ps -auxwf for example, you have the STAT column. If a process is in D state, it is waiting for IO to finish. See man 1 ps in the PROCESS STATE CODES section. If a process is in that state you...
-
OOnslow replied to the thread change network card.@begeis I'm not sure from your a little blurred screenshot, but I guess you want to use the card with a the name beginning with enx6c... Then in /etc/network/interfaces add the line iface enx6cSOMEHARDLYREADABLECHARACTERS inet manual and in...
-
KKingneutron replied to the thread What consumer grade NAS are you using with Proxmox?.All my NAS is homebuilt ZFS across Linux/PC and Macs, but I use Ironwolf and Exos (budget) drives, plus Toshiba N300 and MG series drives for speed. Always use NAS-rated drives for ZFS. Networking = 1Gig, 2.5Gig and 10Gbit ethernet (fiber and a...
-
SSteveITS replied to the thread change network card.If you do proceed you should be able to move vmbr0 from "ports/slaves" nic0 to the new NIC. Since you appear to have run the pinning tool to get the nic0/1 names you may want to do that on the new NIC. If anything I'd think a USB NIC would be...
-
Rrtgy reacted to discostu's post in the thread Fresh PVE install, no VMs running, all cores running (almost) at full Turboboost speed with Like.
Package is linux-cpupower on PVE 9 / Debian 13. ii linux-cpupower 6.12.48-1 amd64 CPU power management tools for Linux
-
KKingneutron replied to the thread How to remove VMware Tools after ESXi → Proxmox migration (Windows).You might be being a little too cautious here. Best bet is to try the recommended procedure on a disposable, duplicated test server and report back.
-
KKingneutron reacted to odhiambo's post in the thread How to remove VMware Tools after ESXi → Proxmox migration (Windows) with Like.
Here is how I did it recently. Procedure: Removing VMware Tools After Migrating Windows 11 to Proxmox (Courtesy of chatgpt). This document provides a reliable, field-tested procedure for fully removing VMware Tools from a Windows 11 virtual...
-
KKingneutron replied to the thread swap on proxmox server ?.zram is useful if you have ~16GB+ RAM, then you can give it a couple of gigs and it will compress. For rpool servers I reserve a couple of gigs at the end of the disk(s) and make swap partitions manually postinstall with gdisk. Don't forget if...
-
Kwhat about zram for swap alternative? it is discouraged here https://pve.proxmox.com/wiki/Zram but in zfs community it is currently recommended as alternative to swap on zvol : https://github.com/openzfs/zfs/issues/7734#issuecomment-3723591151
-
KI use ZRAM myself: https://pve.proxmox.com/wiki/Zram#Alternative_Setup_using_zram-tools You can also leave some space unallocated on the disk and create a SWAP partition or a SWAP file on a ext4 file system created on it.
-
Xxenon96 replied to the thread Proxmox 8.4 Lxc Ollama Amd APU support.An alle Interessenten, also ich habe mein MS-S1 Max Setup genau so hinbekommen wie ich es mir vorgestellt habe, und das war eigentlich sehr einfach. Ich habe mich vorab schon viel informiert und mir viele Foren durchgelesen und Lesezeichen...
-
MMatthias-BZ replied to the thread Über OpenVPN (Trixie im LXC) auf Samba-Freigabe (QNAP mit Trixie als BS) im Heimnetzwerk zugreifen.Hallo, verwendet habe ich diese Anleitung: https://pve.proxmox.com/wiki/OpenVPN_in_LXC der LXC hat folgende Konfiguration: root@PROX:/etc/lxc# pct config 100 arch: amd64 cores: 1 features: nesting=1 hostname: OVPN memory: 2048 net0...
-
Mmilesb posted the thread Booting into the wrong pve instance after recovery work in Proxmox VE: Installation and configuration.I'm in the process of recovering a proxmox installation after failure of one of the rpool zfs mirror disks. And finding that there was no boot partition on the remaining disk... So I've basically got the rpool happy with 2 disks, with the...
-
Wweyon668 posted the thread no stable connection between pve and pbs error 500 can not get datastore in Proxmox Backup: Installation and configuration.Hello, I installed one pve and one pbs in the same network (IP 192.168.1.8 pve, 192.168.1.9 pbs). all works fine. but i can connect from the pve to the pbs only one time. after one backup the pve cannot connect to the pbs again (error 500 can not...