Latest activity
-
HHello, I think is good idea to add to possibility to move backup to another storage by the GUI +1000
-
NNerion replied to the thread Performance Probleme.PVE Knoten: Uploaded 1405 chunks in 5 seconds. Time per request: 3575 microseconds. TLS speed: 1173.15 MB/s SHA256 speed: 1602.78 MB/s Compression speed: 483.65 MB/s Decompress speed: 775.22 MB/s AES256/GCM speed: 9474.32 MB/s Verify speed...
-
IIsThisThingOn replied to the thread Performance Probleme.Sorry, habe gerade gemerkt, dass bei beiden Benchmarks der TLS speed fehlt. Du müsstest wie Beisser oben beschrieben hat (oder in der Doku) den datastore angeben.
-
Zzeuxprox replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Hello, a few days ago, we upgraded our 5-node cluster (with Ceph 19.2.3) from PVE 8.4 to PVe 9.1.1 and PBS from 3 to 4.1.0. After these upgrades, we started experiencing the issues described in this thread. Now, after carefully reading this...
-
gurubert replied to the thread Ceph Squid (19.2.3) Cluster Hangs on Node Reboot - 56 NVMe OSDs - PVE 9.1.1.Is a specific pool affected by shutting down one host? Your CRUSH rules are a wild mix. -
Kkrabat replied to the thread Komische Statistiken.Bei mir seit Ende Dezember das gleiche. Laut Tracking ca. 70 - 100 Mails am Tag, Im Täglichen Report stehen dann zwischen 1.800 und 2.300 Mails.
-
Nnecrolingus replied to the thread [TUTORIAL] 2025: Proxmox PCIe / GPU Passthrough with NVIDIA.Hi @hoardarous Thank you for the fantastic tutorial! I'm about to embark on the same setup. I just want to check with you, once you pass through your Nvidia GPU to tye vm, does your Proxmox host still give video output via SSH or when plugged in...
-
KIch bestätige, dass die Statistiken komisch sind. Ich hatte teilweise duzende empfangene E-Mails in der Statistik für den morgigen Tag, obwohl dieser ja noch gar nicht angebrochen war. Auch an vorherigen Tagen stimmte die Statistik nicht z.B. mit...
-
KMoin, ich bin zufriedener Nutzer vom Proxmox Mail Gateway nach einem Spam Bomb angriff. Nun hab ich allerdings festgestellt, dass die daily Statistiken irgendwie nicht mit der Anzahl der Mails passen. Wenn ich im Tracking Center mir alle...
-
Kkrabat reacted to Barryh's post in the thread Request: Plz add user/pass authentication in the gui for relays(transports) and smarthost with
Like.
Plz add user/pass authentication in the gui for relays(transports) and smarthost. Most remote smtp relays require tls or some sort of authentication to work. I have a combination of servers on-site and off-site and we use tls and ssl requiring... -
cwt replied to the thread IO Backpressure, mein Fehler.Nein, HW RAID benötigst Du nicht. ZFS ist schon die beste Wahl, lediglich die jetzigen Laufwerke sind schlichtweg unbrauchbar. SAS ist natürlich schick, muss Dein Board oder ggf. ein HBA aber auch unterstützen. Reines NVME ZFS RAID bietet die... -
Tthe_MiCrO reacted to gyptazy's post in the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations with Like.
Happy new year! Version 1.1.0 released. Version 1.1.0 now also supports standalone PVE nodes. While this is a corner case and host type might mostly fit, this might still be interesting for corner cases like Windows systems where CPU mitigations...
-
Tthe_MiCrO reacted to gyptazy's post in the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations with Like.
Hey folks, I got asked to cross-post this to the Proxmox forums. You might already know me from the ProxLB project for Proxmox, BoxyBSD or some of the new Ansible modules for Proxmox and I just published a new open-source tool: ProxCLMC (Prox...
-
Tthe_MiCrO replied to the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations.Thx! That really helps a lot. More CPU Types would be great (in our case especially the Epyc variants) but it's already handy as it is ;)
-
Ttigro11 replied to the thread Proxmox VE 9.1.1 – Windows Server / SQL Server issues.The disks are configured with ZFS without any hardware RAID. The slowness is due to the slowness in processing SQL commands. On the other older server, VMware ESXi 6.7 performs much better. I'll post a photo of the disks on Proxmox. Thanks for...
-
-
Wwagnbeu0 replied to the thread Backup to NFS share spikes IO delay, locks up hypervisor..Hi, I am facing the same issues: I am running a Nextcloud Container, accessing files on a local SSD and a NFS Share. During high IO (Reindexing, Backup) i can see that the iodelay is rising up to 80%. I am also looking to an option to prevent this.
-
ZZolt replied to the thread [SOLVED] PVE 9 - GRUB stops the machine immediately.Second node upgrade shit the bed as well. This node had a fail warning before the upgrade: So I made certain that I fixed that and re-ran the upgrade check before doing the upgrade. After the upgrade it got stuck in the same old welcome to...
-
Yyangsm replied to the thread Ceph Squid (19.2.3) Cluster Hangs on Node Reboot - 56 NVMe OSDs - PVE 9.1.1.Provide the content of the /etc/network/interfaces file
-
0007za posted the thread RTX 5060 Ti VFIO passthrough on AMD X570 consumer motherboard fails – Firmware 1:1 IOMMU issue in Proxmox VE: Installation and configuration.Hi all. Hope someone can help or point me in the correct diection as I have tried everything. I would like to get Ubuntu loaded with GPU pass through and could not get that working so I thought I would try with Windows as it is "plug and play"...
-
Ppromoxer posted the thread Backup job causes PVE to machine to reboot in Proxmox VE: Installation and configuration.vzdump 102 103 --node pve --all 0 --mailnotification always --mailto email@example.com --mode snapshot --compress zstd --fleecing 0 --prune-backups 'keep-last=1' --notes-template '{{guestname}}' --storage local 1. Starting from a few days ago...
