Latest activity
-
Ssgw replied to the thread PBS: proxmox-backup-proxy fails to start due to permission issues on /run/proxmox-backup.# proxmox-backup-manager versions --verbose proxmox-backup 4.0.0 running kernel: 6.17.2-1-pve proxmox-backup-server 4.1.0-1 running version: 4.1.0 proxmox-kernel-helper 9.0.4...
-
CCorecounter reacted to Stubennerd's post in the thread Wo finde ich Changelogs von Proxmox PVE? with
Like.
Das ist auf Bugzilla vermutlich besser aufgehoben -
Rrfenrir reacted to janus57's post in the thread Recommended managed switches for Proxmox (VLAN support) with Like.
Hi, From the specs your switch should work. Are you sure you have not made a mistake with your VLAN config ? Best regards,
-
Rrfenrir reacted to guletz's post in the thread Recommended managed switches for Proxmox (VLAN support) with Like.
Hi, As @janus57 already wrote, your switch can do what you want. As a side note, I use extensive only Mikrotik(routers and switchs) for ProxMox. I like it a lot because are very flexible and support a lot of features for a good price for a...
-
DDimmKo replied to the thread Problem with public IP into VM [SOLVED].@janus57, Hi and thank you for your time. My Bridge VM settings in Proxmox MAC FROM EXT1 I see into my VM eth10
-
-
SSteveITS replied to the thread Ceph performance seems too slow.I'd expect that to be HDD speeds, which matches our real world experience... Ceph uses 500 and 80000 IOPS as the upper "unrealistic" limits for HDD and SSD...
-
CCarizoeuf replied to the thread [SOLVED] Issue booting into GRUB after upgrade from Proxmox 8 to 9.I have missed the 4.6.4: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9#GRUB_Might_Fail_To_Boot_From_LVM_in_UEFI_Mode I did not see this information because I did not have any error and only the grub> prompt. A shame there is not any guide to...
-
Isorry to say - but just forget this ssd drives in a Proxmox Host. They are DRAM-Less (no Dram Info in the specs) and I guess low budget Chips. just solve your Problems with buying some use Datacenter SSDs (Samsung PM or SM Series, Intel 45xx or...
-
Jjanus57 replied to the thread Proxmox Corosync quorum votes change.Hi, Why are you running this in cluster ? If you want to mess with quorom, just use the 3 servers as standalone node. Best regards,
-
IiAmWarren replied to the thread [SOLVED] Overly high SSD failure rate?.So I switched the SATA cable out and unfortunately the same issue still arrises. It appears to be in some weird locked up state as Proxmox refuses to boot while the SSD is attached. I agree wholeheartedly. I was not aware of how much of an issue...
-
-
Tthreadstone replied to the thread zugewiesener Speicher / RAM / CPU.Und auch die letzte Frage habe ich gelöst. Die 93,93 GiB sind das gleiche wie die 100 GB. GB ist nicht gleich GiB. Das hatte ich gekonnt ignoriert.
-
JJohannes S reacted to IsThisThingOn's post in the thread Win11 Festplatte: gelöschte Bereiche werden nicht freigegeben with Like.
Gibt noch mehr, aber dies sind die zwei IMHO wichtigsten Punkte: A: Du kannst eine VM praktisch nicht mehr vernünftig mit Hausmitteln backupen, wenn du eine 16TB Windows & Plex VM hast. B: blockstorage hat per default eine statische...
-
Jsorry to say - but just forget this ssd drives in a Proxmox Host. They are DRAM-Less (no Dram Info in the specs) and I guess low budget Chips. just solve your Problems with buying some use Datacenter SSDs (Samsung PM or SM Series, Intel 45xx or...
-
Ssgw replied to the thread PBS: proxmox-backup-proxy fails to start due to permission issues on /run/proxmox-backup.See the log of a failing backup: INFO: starting new backup job: vzdump 142 --node srv1 --mode snapshot --storage pbsSSD --remove 0 --notes-template '{{guestname}}' --notification-mode notification-system INFO: Starting Backup of VM 142 (qemu)...
-
powersupport replied to the thread [SOLVED] Problem backing up container.This error is caused by a leftover mount directory from a failed snapshot, which started happening after the Proxmox 9 upgrade. The key message is: This means Proxmox is trying to mount the snapshot, but the mount directory already contains... -
Llimitlesslindi replied to the thread Proxmox Corosync quorum votes change.im trying to rebuild my homelab and i came upon an interesting question, maybe anyone has an idea: i have lte's say 3 Nodes, 2 for testing and 1 primary for live VM's ... like mentiont above the move nodes i have the harder it is to chanke votes...
-
RRaudi posted the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation in Proxmox VE (Deutsch/German).Hallo, ich bin gerade dabei einen meiner VMware Hosts, die mit vSphere 8.0.3 schon die vGPU genutzt haben, unter Proxmox neu zu installieren, um das ganze hier mal zu testen. Dabei richte ich mich nach dieser Anleitung: NVIDIA vGPU on Proxmox...
-
Tthreadstone replied to the thread zugewiesener Speicher / RAM / CPU.Ich glaube ich habe es herausgefunden: Unter Knoten (pve) - Disks sehe ich die Festplattengröße des Mini-PC's Unter local (pve) - Summary sehe ich den verwendeten und verfügbaren Speicher für die Backups, Dateien, etc. Unter local-lvm (pve) -...
-
Ssgw replied to the thread Problem mit UTF-8.Ich denke, ich hab das auch, wenn auch fast 4 Jahre später ;-) https://forum.proxmox.com/threads/pbs-proxmox-backup-proxy-fails-to-start-due-to-permission-issues-on-run-proxmox-backup.178390/post-827757
-
Ccarnyx.io replied to the thread no physical interface on bridge 'vmbr1' after Upgrade in Proxmox 8.4.16.To resolve the problem of vlan Tagging, i need to activate "vlan awareness" on pve 8.4.16. Previously, it was not necessary until 8.4.14 ie: auto vmbr1 iface vmbr1 inet manual bridge-ports bond0 bridge-stp off bridge-fd 0...
