Latest activity
-
LLaWLi replied to the thread lxc Container auf dem Monitor ausgeben.Ich habe in meiner Wohnung nicht genug Platz für mehrere Geräte. Da ich nun auch Selfhosting betreibe und das gerät schon hinterm TV steht, fände ich es praktischer, wenn ich dasselbe Gerät auch für Kodi nutzen könnte.
-
Ffleetfoxx replied to the thread Understanding bind mount point permissions.I'm having a similar issue with a Transmission LXC. I get a "permission denied (13)" error when writing to a bindmount directory. I suspect this is because Transmission is running as the `transmission-daemon` with a different user ID and group...
-
IiAmWarren posted the thread [SOLVED] Overly high SSD failure rate? in Proxmox VE: Installation and configuration.Hello! First time posting here, I had a question. I purchased 4x 1TB Patriot P220 SSDs to use for virtual machines, not for performance but hoping for higher life expectancy. Unfortunately I've had 3 out of the 4 SSDs fail within a year of...
-
-
SSteveITS replied to the thread Proxmox cluster with all nodes in the same data center and where each node has a public IP.Why is it not possible? Set up a router with your servers behind it. We have private IPs for our equipment and public for the VMs. Behind a router/firewall of course.
-
Ddburnet1 replied to the thread watchdog detected hard lockup on cpu XX.I know it's been six months since the original post, but was there ever a solution to this? I have five hosts, all Dell OptiPlex & Precisions, and Core i5's & i7's, all with the latest BIOS's, and they all updated from 9.1.1 to 9.1.4 without any...
-
Bbig_blue replied to the thread hdd performance.@news: This hardware looks very impressive and comes very close to my desired configuration.
-
news replied to the thread hdd performance.Please think of: Mainboard: ASRock WRX80 Creator R2.0 https://www.asrock.com/mb/AMD/WRX80 Creator R2.0/index.asp CPU: AMD Ryzen Threadripper PRO 3945WX https://www.techpowerup.com/cpu-specs/ryzen-threadripper-pro-3945wx.c2317 CPU: AMD Ryzen... -
Ccomplexplaster27 reacted to zimm's post in the thread [SOLVED] iGPU passthrough with amd 7950x with
Like.
I finally got around to trying all of this again today. And it worked! I can ow select the "AMD Radeon" card in Plex which is running on Docker, which is running on a Debian 12 VM on Proxmox 9. Thanks again for sharing your setup! -
Aalexskysilk replied to the thread Ceph performance seems too slow.What you're describing is a mesh network. for the purposes of the conversation, this is the same as having a single active link on each node for both public and private networking. so you're sharing the IO for any PG between the client and disk...
-
Bbig_blue replied to the thread hdd performance.@news: Thank you very much for your support. All this time, I thought I was getting full speed because I'm using a 5000 series CPU. Just for fun, I ran another test. I installed Proxmox on a SATA SSD, formatted the individual SSDs with XFS, and...
-
Ccarles89 replied to the thread Issues after upgrading to 6.17.4-1-pve.If everything works as expected with a previous kernel, an option would be to install PVE 9, pin [0] the kernel that works (i.e. 6.14) and then upgrade to PVE 9.1. If it works, you could pin the same kernel on the rest of the nodes before...
-
NNewuow replied to the thread [SOLVED] Best practice for Truenas virtualized on Proxmox.Just wanted to give feedback about my setup. I did it like i described it, and i cant complain. For better comparison here is my hardware: Intel(R) Core(TM) i5-14400 ASRock B760M-H2 32GB crucial CT16G48C40U5 (if i could choose now again, i...
-
-
KKingneutron replied to the thread hdd performance.> It looks like the first NVME is downgraded to PCIe3 You will likely get better performance by doing a zpool detach on the 2nd nvme, and re-using it for data / LXC/VM vdisks. PCIe3 is OK for proxmox boot/root, but you want better I/O for your...
-
KThank you. Your AMD Ryzen 7 5700G CPU combined with ASROCK, X570 Phantom Gaming 4 has "only" PCIe 3.0 16+4+4 CPU Lanes. So your PCIe 4.0/3.0 x16 slot get only PCIe 3.0 x16 Lanes max # https://www.techpowerup.com/cpu-specs/ryzen-7-5700g.c2472...
-
The above recap is so good, it should be bookmarked for anyone designing Proxmox networking. I wanted to add one item here which wasn't really addressed and took me a while to figure out, and that is 'backup or failover' links and networking... -
Kkentravis replied to the thread Ceph performance seems too slow.For the three nodes, we put in a extra two NICs in each box to dedicate just for Ceph communications, not connected to a switch, just each box directly connected to the other two. How would I see the latency for the entire Ceph cluster? (Back in...
-
Kkentravis replied to the thread Ceph performance seems too slow.No, we built this environment from spare parts and what we could get cheep.
-
Kkentravis replied to the thread Ceph performance seems too slow.Hi UdoB, I am not sure I understand about posting in a code block. but here are results from of commands. Also my VMs and Proxmox couldn't find the fio command, so I may need some more guidance for that: [global] auth_client_required = cephx...
-
Kkentravis replied to the thread Ceph performance seems too slow.
-
003984 replied to the thread Random IO Error - Windows Server 2025.zpool status pool: data state: ONLINE config: NAME STATE READ WRITE CKSUM data ONLINE 0 0 0 mirror-0...
