Latest activity
-
Ggseeley replied to the thread Mellanox ConnectX-3 VFIO passthrough issues.Try driverctl instead of kernel parameters and blacklists. I found this package when I needed to pass through one of two identical HBA devices which I wasn't able to do with parameters. It seems to bind the chosen driver via udev when it's...
-
fstrankowski replied to the thread File services recommendation for homeuser?.Better approach: Install TrueNAS inside Proxmox and passthrough the storage controller if its seperate. Win-Win-Win :cool: -
fstrankowski replied to the thread Windows Server setup.Hier findest Du alle benötigten Treiber für die Installation, inklusive der Anweisungen wie man diese nutzt.
-
Its all documented in the article you linked. Its still just an ordenary ISO like any other OS. The VM settings are documented just fine aswell. -
news replied to the thread hdd performance.Thank you. Your AMD Ryzen 7 5700G CPU combined with ASROCK, X570 Phantom Gaming 4 has "only" PCIe 3.0 16+4+4 CPU Lanes. So your PCIe 4.0/3.0 x16 slot get only PCIe 3.0 x16 Lanes max # https://www.techpowerup.com/cpu-specs/ryzen-7-5700g.c2472...
-
Ggseeley reacted to jaminmc's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with
Like.
I had the same DMA issue passing through NIC cards. Here is how I fixed it. The boot log from kernel 6.17.4-1-pve shows recurring DMAR faults (e.g., [DMA Read NO_PASID] Request device [02:00.0] fault addr 0x5464000 [fault reason 0x0c] non-zero... -
Ggseeley reacted to IsThisThingOn's post in the thread CPU type `host` is significantly SLOWER than `x86-64-v2-AES` with Like.
If you set the CPU type to x86-64-v3, Windows recognizes that it is a VM. Because of that, some CPU mitigations are not active. If you set it to host, Windows does recognize that it is a VM. Because of that, some CPU mitigations are active...
-
MMarcusEvans posted the thread File services recommendation for homeuser? in Proxmox VE: Installation and configuration.Hello. I have bought an Aoostar WTR MAX on the assumption the box had two SATA-controllers. I had asked if TrueNAS was supported under Proxmox and received a positive response. Unfortunately, there is only one controller so a TrueNAS is no...
-
Ddragoangel replied to the thread Mailcow + PMG make sense?.Short answer: no, it not worth it. Mailcow shipped with well integrated rspamd in postfix which by design is better then spamassasin integrated with same postfix in pmg. You lowering overall experience of users and filtration quality by putting...
-
Ggseeley reacted to zodiac's post in the thread CPU type `host` is significantly SLOWER than `x86-64-v2-AES` with Like.
There is a lengthy discussion of what is happening at https://www.reddit.com/r/Proxmox/comments/1j2zrol/the_reasons_for_poor_performance_of_windows_when/ And there also is a blog post at...
-
Yyummiweb replied to the thread Backup fails when (additional) container disk is on ZFS ZVOL.This is the configuration at the time of the error (already under PVE9) - both drives on the ZVOL.
-
Rraiskate32 replied to the thread MP on LXC is not coming through.Cela indique généralement un problème d'autorisations ou de mappage plutôt que le montage lui-même. Proxmox peut très bien voir le partage NFS, mais lorsque vous le transmettez au LXC, l'UID/GID du conteneur ne correspond souvent pas à ce que le...
-
Yyummiweb replied to the thread Backup fails when (additional) container disk is on ZFS ZVOL.The "workaround" unfortunately has a significant drawback: (PVE) snapshots of the container can no longer be created if one of the drives is not located on a ZVOL. Which is also the reason for storing the container on a ZVOL – to create...
-
RRichardCNL replied to the thread VM incremental backups much larger than expected on PBS..INFO: starting new backup job: vzdump --all 1 --notes-template '{{guestname}}' --fleecing 0 --mode snapshot --quiet 1 --mailto info@exampledomain.tld --mailnotification failure --notification-mode legacy-sendmail --storage pbs INFO: skip external...
-
CCorecounter replied to the thread Wo finde ich Changelogs von Proxmox PVE?.Danke euch beiden. Die Lösungen sehen effizienter aus. Ich werde das mal ausprobieren. :)
-
CCorecounter reacted to proxuser77's post in the thread Wo finde ich Changelogs von Proxmox PVE? with Like.
Ja, dort wird es im Zusammenspiel mit apticron für Benachrichtigungen genutzt. Mein Link zeigt, wie man es für die interaktive Shell konfiguriert. Das Tool ist dasselbe, die Art der Nutzung aber eine andere.
-
CCorecounter reacted to Impact's post in the thread Wo finde ich Changelogs von Proxmox PVE? with Like.
apt-listchanges ist in meinem Link ebenso erwähnt
-
CCorecounter reacted to Impact's post in the thread Wo finde ich Changelogs von Proxmox PVE? with Like.
Vieleicht ist das auch hilfreich für dich. Für kleine Updates gibt es soweit ich weiß keine Zusammenfassung wie es das für große gibt. Vielleicht hier melden?
-
CCorecounter reacted to proxuser77's post in the thread Wo finde ich Changelogs von Proxmox PVE? with Like.
Eine weitere Möglichkeit neben apt changelog <packagename> wäre den Proxmox Git Server abzufragen: https://forum.proxmox.com/threads/minor-releases-changelog.109406/post-470393 Oder, wenn du nicht jedes Paket manuell abfragen willst, kannst du...
-
Bbeisser reacted to fstrankowski's post in the thread GEEKOM Mini IT8 mit 512GB NVME SSD für Proxmox 9 ohne zusätzliche 2.5 Zoll SSD with Like.
Mädels, es reicht jetzt. Danke euch beiden. BaCk tO ToPiC PleAse :p