Latest activity
-
ELuckily for you, you dont have to be dependent on the firmware controls. once booted to PVE, install megacli/perccli. from there, you can /path/to/MegaCli64 -pdlist -a0 /path/to/MegaCli64 -AdpSetProp -EnableJBOD 1 -a0 /path/to/MegaCli64...
-
Aalexskysilk replied to the thread H740p mini and SAS Intel SSD PX05SMB040.Luckily for you, you dont have to be dependent on the firmware controls. once booted to PVE, install megacli/perccli. from there, you can /path/to/MegaCli64 -pdlist -a0 /path/to/MegaCli64 -AdpSetProp -EnableJBOD 1 -a0 /path/to/MegaCli64...
-
Aalexskysilk replied to the thread OSD errors.What you're seeing isnt actually errors. It is, however, an indication of OSD resource starvation; if osd 4, 6 and 8 are all on the same host, check overall host load, and might need to make some adjustments hardware-wise. Alternatively, you can...
-
EErtu posted the thread H740p mini and SAS Intel SSD PX05SMB040 in Proxmox VE: Installation and configuration.Hi everyone, Happy Christmas :) I just put 10x of this SDD drive on my Dell R640 with Perc H740p mini controler. I tried to put them on eHBA Mode but no way :/ According to Dell, they must be on "non-raid state" before enabling them for a...
-
-
AAceBandge replied to the thread Hardware requirements or recommendations for PDM ?.To MagicFab's point, it would be nice if it could be installed on an IT workstation or laptop; not necessarily bare metal but like a Linux or Windows application. If it's not a resource hog and it's only showing status, health, and managing UI...
-
Aalexskysilk replied to the thread Seagate Exos X16 not detected.SAS3 drives have a "SAS Power Disable" pin which does not exist on SAS2 or earlier backplanes. How are you attaching the disk to the host bus adapter? what kind of backplane does your server have?
-
KKarolTheGuy replied to the thread iGPU Pass-through - No console shell with q35 but works fine with i440fx.That was a good idea but unfortunately it did not change anything. I tried 10, 9.2 and 8.2 I was reading somewhere(can't remember where) that it's expected behavior for Q35 and that I would have to tell the kernel to not load the GPU as display...
-
Bbikefriend replied to the thread PVE Web-GUI.Hallo, es war ein ein Fehler im Dateirechtesystem (chmod). Korrigiert (beide Nodes verglichen) und es funktioniert alles wieder einwandfrei. Vielen Dank und schöne Weihnachten.
-
Ffpausp reacted to fireon's post in the thread [SOLVED] Machine type 'pc-q35-5.1' is deprecated with
Like.
Perfekt! Freut mich das du es hinbekommen hast. Schöne Feiertage wünsche ich dir :):cool: -
Llonewolfnight77 replied to the thread Samba ACL's unable to be modified via VirtioFS.Following up here, this is still a known issue. No change as of 9.1.2
-
GGE_Admin replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.We finally see the light! :cool: Merry Xmas to everybody.
-
KKingneutron replied to the thread Recovery: OS Drive Died and Now I'm Trying to Recover My VMs.https://github.com/kneutron/ansitest/tree/master/proxmox Look into the bkpcrit script, point it to separate disk / NAS, run it nightly in cron. Then among other things you will have a backup of your LXC/VM definitions.
-
SI had a simple Debian VM installed and that was running fine. After a while, the VM crashed and I can't boot it anymore. I get following error root@proxmox:/# qm start 201 start failed: command '/usr/bin/kvm -id 201 -name...
-
KKingneutron reacted to dasborgnearly's post in the thread Recovery: OS Drive Died and Now I'm Trying to Recover My VMs with Like.
Thanks for that github link. That basically solved my problem for me.
-
Mmaxim.webster replied to the thread Benötige Hilfe für Upgrade V8 auf V9.Was ist denn jetzt das Problem, das pve8to9 Tool gibt doch sehr konkrete Hinweise, was zu tun ist?
-
KHallo Zusammen, zuerst mal Frohe Weihnachten. Könnt Ihr mich bitte beim upgrade unterstützen? Aktuell ist die Version 8.4.14 installiert. Habe dann pve8to9 aufgerufen und ein Fehler und 4 Warnungen wurde mir angezeigt: WARN: - The matching CPU...
-
Ddasborgnearly replied to the thread Recovery: OS Drive Died and Now I'm Trying to Recover My VMs.Thanks for that github link. That basically solved my problem for me.
-
OOnslow replied to the thread Disconnecting from network: unplug and re-plug ethernet fixes it.Welcome, @31Cat Maybe some power-saving settings? Enabling them causes problems more than once.
-
JJohannes S reacted to fpausp's post in the thread [SOLVED] Machine type 'pc-q35-5.1' is deprecated with Like.
Danke hab ich gemacht, nicht nur die NIC sondern auch die 2. HDD war offline... Danke und frohe Weihnachten!
-
KKarolTheGuy reacted to celemine1gig's post in the thread iGPU Pass-through - No console shell with q35 but works fine with i440fx with Like.
Did you already try to vary the exact "q35" version, that you are using? You can use "q35" which just is the latest, but you can also choose specific versions of it. Maybe the issue started with one Version of the Maschine Definition.
