Latest activity
-
spirit replied to the thread Who has already used EVPN in Data Centre Manager and really tested it?.Running 5000vms with 100 nodes since 5years. (I have made the original evpn code for it) -
spirit replied to the thread Multi-site federation - Would this be interesting for Proxmox ?.About pdm, Disaster recovery is on the roadmap. Evpn central configuration is already available in 1.0. If you need other vpn mesh, they need to be added in pve sdn first
-
HHafnernuss posted the thread Broadcom LSI 8600-24i passthrough questions (and ASPM confirmation) in Proxmox VE: Installation and configuration.Hi, I've recently upgraded from a 8300-8i to a 8600-24i, running proxmox 9.1.1, kernel 6.17.2-1-pve. First the good things: The card works without any issues and fully supports ASPM. I am able to reach even C10 without any issues (since this is...
-
GGilou replied to the thread VM hang/frozen during backup.Haha. This is an old thread, but.. On Proxmox 9.1, a rather active Debian 13 VM fully froze just around receiving fsfreeze during a backup task. Investigating..
-
news reacted to Falk R.'s post in the thread [SOLVED] PBS 4.1: Push Sync Jobs schlagen fehl, kein Output im Task Viewer & Connection Error with
Like.
Ich würde mal auf zu langsame Disks tippen. Die HDDs sind eh nicht schnell und wenn du dann auch noch ZFS nutzt dazu die Deduplizierung des PBS, hast du fast nur Random Daten, was die HDDs gar nicht gut können. Dann wird das irgendwann so... -
PPeterZwgatPX replied to the thread [SOLVED] PBS 4.1: Push Sync Jobs schlagen fehl, kein Output im Task Viewer & Connection Error.Die Geschwindigkeit der HDD sollte eigentlich nicht für die fehlgeschlagenen Sync Jobs verantwortlich sein, da das Setup für ca. 1 Jahr ohne Probleme lief. Du hast mich aber wahrscheinlich in die richtige Richtung geführt. Die betroffene HDD hat...
-
PPeterZwgatPX replied to the thread [SOLVED] PBS 4.1: Push Sync Jobs Fail, No Output in Task Viewer & Connection Error.I think I have found the cause of both problems. Regarding the empty Task Viewer: I accessed the GUI of my Proxmox and Proxmox Backup Server via a domain that runs behind a Traefik reverse proxy. When I access the GUI directly via the IP...
-
Ppaul2000 replied to the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations.Nice handy tool you made!
-
Ppaul2000 reacted to gyptazy's post in the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations with Like.
Hey folks, I got asked to cross-post this to the Proxmox forums. You might already know me from the ProxLB project for Proxmox, BoxyBSD or some of the new Ansible modules for Proxmox and I just published a new open-source tool: ProxCLMC (Prox...
-
Ppaul2000 replied to the thread Proxmox Virtual Environment 9.1 available!.Amazing work! Proxmox gets better and better!
-
Ppaul2000 reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.1 available! with Like.
We're proud to present the next iteration of our Proxmox Virtual Environment platform. This new version 9.1 is the first point release since our major update and is dedicated to refinement. This release is based on Debian 13.2 "Trixie" but we're...
-
UdoB reacted to gyptazy's post in the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations with Like.
Hey folks, I got asked to cross-post this to the Proxmox forums. You might already know me from the ProxLB project for Proxmox, BoxyBSD or some of the new Ansible modules for Proxmox and I just published a new open-source tool: ProxCLMC (Prox... -
MM_D replied to the thread Proper way to install Proxmox in UEFI mode..I would expect so - however, Secure Boot seems to default to off, and I am happy to leave it at that for now. I reset the CMOS again to regain access to the BIOS. Then, the first thing I did was attempt to setup Intel AMT, thinking this would...
-
CProblem solved, fsck /dev/vg0/vm-101-disk-0 found ~50 inodes error, backup start working after fix with fsck
-
UdoB replied to the thread Node showing ?.Just guessing: make sure that name resolution works correctly. Usually by a full blown DNS server (possibly overkill) or (simpler) by maintaining a consistent /etc/hosts, containing all host names and addresses of all hosts. That file should be...
-
Aaestech posted the thread Reject / Discord mails coming to specific users in Mail Gateway: Installation and configuration.example.com is one of the domains in my PMG. The mail server is hosted on WHM with Exim. The server does not have the mailbox unknown1@example.com. (this happens to multiple mailboxes on same domain). How can I discard or reject emails sent to...
-
Ddavidlan replied to the thread NVIDIA Driver Passthrough Failure for OpenWebUI.Your issue isn't the Nvidia driver; it's a repository conflict. You are trying to install dependencies for Intel GPUs on a system meant for Nvidia. The error level-zero-dev comes from the Intel repositories listed in your apt update log (Hit:4...
-
LnxBil replied to the thread Something like smbios.reflectHost possible?.There are other threads on the forums dealing with this: https://forum.proxmox.com/threads/passing-through-hardcoded-windows-slic-license-from-physical-host-to-vm.162685/ https://forum.proxmox.com/threads/passthrough-hardcoded-windows-license.72767/ -
UdoB replied to the thread PVE and PBS on a single machine: how to turn off only PVE a/o PBS and keep Linux running?.You could run systemctl stop proxmox-backup-proxy.service proxmox-backup.service... and no backup is possible anymore, as far as I can see. For PVE (and active HA) there is ha-manager crm-command node-maintenance enable pveX . And PVE itself...
-
LnxBil reacted to gyptazy's post in the thread [TUTORIAL] ProxCLMC - A lightweight tool to determine the maximum CPU compatibility level across all nodes in a Proxmox VE cluster for safe live migrations with Like.
Hey folks, I got asked to cross-post this to the Proxmox forums. You might already know me from the ProxLB project for Proxmox, BoxyBSD or some of the new Ansible modules for Proxmox and I just published a new open-source tool: ProxCLMC (Prox...