Latest activity
-
Bbeisser reacted to MarkusKo's post in the thread Proxmox VE freezes on HPE ProLiant DL580 Gen10 (4× Xeon Platinum 8280L, 1 TB RAM) with
Like.
No, your Firmware versions are ancient. System ROM (BIOS): U34 v2.36 (July 16, 2020) -> 3.60_08-06-2025 (2025-08-14) iLO 5 firmware: v2.x -> 3.17 (2025-12-05) Storage controller: HPE Smart Array P408i-a (firmware v1.32) -> 5.61(H) (2025-12-08)... -
MM_D replied to the thread Proper way to install Proxmox in UEFI mode..OK, that's interesting. This is the first time I have even heard of OpROM to be fair. Yes, dedicated GPU, no integrated CPU in this server. Its a NVIDIA Quadro, will have to check on the exact model. Thing is, the video output is set to legacy...
-
Jjamesdev replied to the thread s3 backup local cache.Okay, so I guess I should have done more searching. Looks like it was a bug, I updated and ran garbage collection. Looks like it's freeing up space. I think everything is good now
-
news replied to the thread Keine Verbindung ins Internet nach Installation.Möglicherweise ist dein Netzwerk doch nicht korrekt eingerichtet, die IPv4 des Proxmox VE Server darf (sollte) nicht im DHcpd Bereich des Routers liegen. Evtl. zeigst Du hier auch mal alle Einstellungen. -
AAlecz replied to the thread High IO Delay and Unable to Login via Web Interface.I'm experiencing this issue with Proxmox 8.4.0 on a relatively low power machine (Dual Celeron 2957U @ 1.40GHz, 8 GB RAM). I know what causes the IO load: I have a Zpool on a USB3 HDD and whenever I do IO tasks on that pool, the system becomes...
-
news replied to the thread Keine Verbindung ins Internet nach Installation.Wie sieht es den beim Netzwerk unter DNS aus?
-
OOnslow replied to the thread Best‑practice for exposing PMG GUI + Quarantine via HAProxy (TLS termination or passthrough)?.Hi. I just remember there is a thread of a similar topic from a few days ago. I'm copying the link in case it is of some help for you :) : https://forum.proxmox.com/threads/pmg-quarantine-links-behind-ha-proxy.178240/
-
TTomasHermansson posted the thread Best‑practice for exposing PMG GUI + Quarantine via HAProxy (TLS termination or passthrough)? in Mail Gateway: Installation and configuration.Hi everyone, I’m trying to correctly expose the Proxmox Mail Gateway (PMG) 9.0.2 web GUI and the end‑user quarantine interface via HAProxy on port 443, but I’m struggling to find a clean, recommended way to do this. My setup: PMG runs...
-
EeMTB replied to the thread Proxmox Virtual Environment Upgrade von Version 8 auf 9, Debian 13.In bestimmten VM Setups ist das wohl erforderlich. Ich habe bestimmte HW per PCI Passthrough anders nicht durchreichen können. Kann ja auch vom Mainboard / dem BIOS abhängen...
-
MMoch2209 posted the thread Keine Verbindung ins Internet nach Installation in Proxmox VE: Networking and Firewall.Hallo zusammen, Ich bin leider absoluter Neuling, was Proxmox angeht. Mein Plan war, Proxmox auf einem Intel NUC zu installieren und anschließend Home Assistant darauf zu betreiben. Ich habe Proxmox inzwischen bereits zum dritten Mal neu...
-
-
TTErxleben replied to the thread Proxmox Virtual Environment Upgrade von Version 8 auf 9, Debian 13.Warum hüserst du mit der EFI-disk rum? I
-
Jjamesdev replied to the thread s3 backup local cache.Hey, I'm back. The disk I set as cache filled up and isn't clearing. It seems like it's treating it as an actual backup location instead. Getting: 2025-12-22T11:56:24-07:00: skipped: 31 snapshot(s) (2025-11-27T18:28:06Z .. 2025-12-16T20:26:22Z)...
-
Ssf_zacks replied to the thread Backup fails as part of scheduled backup job but successful when manually requested.What is weird with that is it works fine if I just tell it to update manually to the same location. Also it is now working the last few days but it has changed to a different VM having that error and I have 10 others that all go the same location...
-
Falk R. replied to the thread VM 300 qmp command 'cont' failed - unable to connect to VM 300 qmp socket - timeout after 450 retries.Schau mal bitte im Windows Eventlog ob da ein Fehler steht. Sonst bleibt nur den Guest Freeze abzuschalten. -
GGalaxis replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.I run PVE 9 from the no-subscription repos on an old desktop PC (HP EliteDesk 800 G1, 2018) and see occasional SATA errors when using the 6.17.2-1-pve kernel. These didn't show up previously under PVE 8, and disappeared after downgrading to the...
-
I agree, especially since TrueNAS not only supports the Apps from the app store but also allows setting up containers with docker-compose files. Most applications in the self-hosted sphere already provide ones for copy/paste. Or like you said... -
JJohannes S replied to the thread Disk constellation for DXP4800.I agree, especially since TrueNAS not only supports the Apps from the app store but also allows setting up containers with docker-compose files. Most applications in the self-hosted sphere already provide ones for copy/paste. Or like you said...
-
PPwrBank replied to the thread [SOLVED] Guidance on setting up tape backup jobs to append to tape?.Ahh, figured it out. Needed to change the pool for the tapes to "Continue" for the allocation policy. This writes to tapes that have space available.
-
Sspokespersonneighbor posted the thread Cant start priviledged container - fresh install in Proxmox VE: Installation and configuration.Hello. Im trying to setup fresh Proxmox 9.1 host and having big trouble starting any privileged container. To make it funny, VMs and UNprivileged containers are working just fine. I even reinstalled proxmox hypervisor - without success. It...
-
MMarkusKo replied to the thread Proxmox VE freezes on HPE ProLiant DL580 Gen10 (4× Xeon Platinum 8280L, 1 TB RAM).No, your Firmware versions are ancient. System ROM (BIOS): U34 v2.36 (July 16, 2020) -> 3.60_08-06-2025 (2025-08-14) iLO 5 firmware: v2.x -> 3.17 (2025-12-05) Storage controller: HPE Smart Array P408i-a (firmware v1.32) -> 5.61(H) (2025-12-08)...
