Latest activity
-
MMarkusKo reacted to Neobin's post in the thread Proxmox VE freezes on HPE ProLiant DL580 Gen10 (4× Xeon Platinum 8280L, 1 TB RAM) with
Like.
I would start with updating the bios/UEFI and all other firmwares to their most recent version... -
UdoB reacted to davidsg's post in the thread CEPH Erasure Coded Configuration: Review/Confirmation with Like.
Your usable space calculation is correct, but not the placement. Ceph doesn't place k and m chunks separately, it's all just chunks to the CRUSH algorithm. For each PG it will choose three hosts, and then for each of those hosts it will choose... -
Bbeisser replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.that is the whole bios. there is no such thing as bios patches. you are doing something wrong with the software since its throwing errors about not finding textfiles. it doesnt do that for me:
-
-
Ddavidsg replied to the thread CEPH Erasure Coded Configuration: Review/Confirmation.I'm not sure why that matters? I only wanted to point out that it's possible to configure more complicated placement rules than "this many copies, this is the failure domain" contrary to what some comments here say. But since you ask, I use a...
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.And where did you get the entire BIOS to create the ROM? Because look what's showing up on my screen, as if it were just a BIOS patch and not the whole thing. Scanning BIOS file bios.bin. Please wait... Manufacturer - GMKtec Model...
-
-
Ddavidsg replied to the thread CEPH Erasure Coded Configuration: Review/Confirmation.Your usable space calculation is correct, but not the placement. Ceph doesn't place k and m chunks separately, it's all just chunks to the CRUSH algorithm. For each PG it will choose three hosts, and then for each of those hosts it will choose...
-
LLKo reacted to Nodefield's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like.
Sorry, I just mistyped and missed the critical word "not" in "not limited" in my earlier reply. Got it, thank you. I've tried to look through the actual tcp kernel patches involved and I can't pinpoint the mechanism that triggers stall condition...
-
Ggiovvv replied to the thread upgrade to proxmox 9 - lvm config.thanks!
-
GIt shouldn't be needed but try this apt -o Dpkg::Options::="--force-confask" install --reinstall lvm2 This can help to check for files which were modified apt install -y debsums # Configs debsums -es # All debsums -as In case you wonder...
-
Ddrevilish replied to the thread Spinning disks reporting as type "unknown".After another reboot. It updated back to HDD / SSD reporting.
-
Ppiro299 replied to the thread Proxmox 7 - Manuelles Backup lässt sich nicht erstellen.Ich habe auch gerade gesehen, dass im Dump Ordner die Backup Datei liegt und ein tmp Datei. Anscheind hat Proxmox angefangen und dann warum auch nicht weitermachen können. Ich werde nachher mal einen Monitor ranhängen und das Backup von der...
-
Ppiro299 replied to the thread Proxmox 7 - Manuelles Backup lässt sich nicht erstellen.root@pve:~# zfs get all local-zfs/subvol-103-disk-0 NAME PROPERTY VALUE SOURCE local-zfs/subvol-103-disk-0 type filesystem -...
-
Nnyx1197 replied to the thread Debian 13 LXC await network timeout.I have same problam. root@ai:~# systemd-analyze blame 5min 1.141s ifupdown-wait-online.service 776ms docker.service 703ms postfix.service 266ms networking.service 239ms udisks2.service 228ms user@0.service...
-
UHere is my configuration, and I would like to understand why, because I thought that thanks to the vnet, the two VMs on the two vnets would not be able to ping each other, but they can. Vmbr1 -> portX (trunk vlan 10 and 20) First, you must...
-
-
LLaWLi replied to the thread configure bios to boot my disk.@LnxBil Tahnks a lot! Sems I was in a tunnel and did not found the way. @ proxmox: Please add in the Hardware configuration on the disk edit window a link to the bootorder settings.
-
IIsThisThingOn replied to the thread Proxmox Datacenter Manager 1.0 (stable).Sorry, I am a total noob when it comes to REST API. Does that mean that: A: Is the connection always and mandatory secured with HTTPS, just like with PBS? B: you recommend a VPN instead exposing the host, since it is best practice? C: Does the...
-
IIsThisThingOn replied to the thread Proper way to install Proxmox in UEFI mode..On my supermicro I can disable all OpROMs, but I don't have a GPU, so unfortunately I also don't know. Maybe try to disable fast boot, this is known to cause issues with Linux, especially the MSI implementation of it.
-
WWichtelmann007 posted the thread LXC Container kommt nicht ins Internet in Proxmox VE (Deutsch/German).Hallo in die Runde, ich bin neu und versuche mich mal mit Proxmox. Ich möche ioBroker und andere Anwendungen auf einem NiPoGi Pinova P1 Mini PC AMD Ryzen 4300U instalieren. Mein erster Versuch scheiterte, woraufhin ich den Container komplett...
-
-
Bbeisser replied to the thread Is this an enterprise SSD?.why resurrect an months old thread just to essentially repeat what everyone else has writte before?
-
Ssuperaldito posted the thread Huawei NIC SP570 not showing ini Proxmox VE 7.3 in Proxmox VE: Networking and Firewall.hi guys, i have HP Proliant DL380p server with proxmox 7.3 installed , and i attach huawei nic sp570 , but its not showing on proxmox , can you guys help me ?, ive tried to search the driver but i cannot find
