Latest activity
-
JJohannes S reacted to Falk R.'s post in the thread Was ist eigentlich der richtige Weg, einen Trunk in Proxmox zu verwenden ohne dedizierte vlan Konfiguration für VMs with
Like.
Wenn du verbieten möchtest, dass jemand ein VLAN bei der VM einträgt, dann kannst du nur mit vielen Linux VLANs auf deinem Adapter oder Bond arbeiten und viele Bridges anlegen. Aber auch die können ja dann den VMs zugeordnet werden und man... -
JFIPS may only be required in many of these US gov/contractor applications if encryption is defined as the only mechanism protecting confidentiality of the data. If the server cluster is appropriately physically protected and separate VLANS are...
-
Eempirical6355 replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.I was running PVE on kernel 6.8 for the longest time with no issues. I updated to PVE9.0 back in August and immediately had issues with the VM that does PCI passthrough. I posted about it here and fiona responded here saying kernel changes might...
-
Nn8ur replied to the thread How to add hard drive attached to host to an LXC.I ended up ising a privileged container instead. That was a *lot* easier, and in my environment the security implications were acceptable.
-
MMelone145 replied to the thread Proxmox mit Firewall.Das ist mein Aufbau Internet | nic1 (Physikalische Netzwerk karte) | vmbr0 (NAT auf die 10.0.10.2) | Proxmox | vmbr1 (WAN Firewall) | OPNsense | vmbr2 (LAN...
-
JI can say that the WTR MAX is almost the perfect Proxmox node, lots of power in every aspect needed in a Proxmox node. I wish I could afford a 3 unit cluster. And Aoostar, although being relatively new to international sales, are fairly good...
-
JI've had the unit since early Sept, it's fully loaded with 11 drives and using the 10Gbe networking. Running Windows 11 VM and a TrueNAS server. The only times it's been down is when I'm messing around with the configuration, but even that...
-
JSo ganz verstehe ich dein Vorhaben noch nicht. Bei mir läuft das VPN direkt auf der Firewall (pfSense). Kannst du bitte etwas mehr Details zu deinem Aufbau schicken? Zum Beispiel: Welche Geräte sind beteiligt, wie sind die Netze aufgebaut und wo...
-
JJohannes S reacted to blegedes's post in the thread Proxmox server hardening document for compliance with Like.
Hello, We recently documented and automated a basic Proxmox VE 9.1 hardening baseline to support audit and compliance discussions. The repository focuses on: - Proxmox VE host-level hardening (management plane) - Minimal and graduated controls...
-
JGuten Morgen, vielen Dank für den Input. Ich habe jetzt mal eine RAM lastige Maschine auf den alten ESXI zurück geschoben bzw. dort wieder aktiviert und es ist alles wieder super. Ich habe leider ein RAM Problem, das kann ich anpassen wo viel wie...
-
Ddestiezk replied to the thread CPU change.Thanks for the reply, I could've tried this. My issue was fixed though, I have disabled VT-d in BIOS and it suddenly started working like normal. Using Impact's solution to pass through GPU to my LXCs.
-
Ggiovvv posted the thread upgrade to proxmox 9 - lvm config in Proxmox VE: Installation and configuration.Hello, I have succesfully completed the upgrade from pve 8 to 9. I have read too late this note in the configuration instructions: /etc/lvm/lvm.conf -> Changes relevant for Proxmox VE will be updated, and a newer config version might be...
-
DHi, the correct syntax for the pct command is pct set 103 -mp0 mp=/host/dir,/container/mount/point EDIT: should be pct set 103 -mp0 /host/dir,mp=/container/mount/point See here for more information. If you want to modify the container config...
-
Mmicneu replied to the thread Proxmox mit Firewall.So ganz verstehe ich dein Vorhaben noch nicht. Bei mir läuft das VPN direkt auf der Firewall (pfSense). Kannst du bitte etwas mehr Details zu deinem Aufbau schicken? Zum Beispiel: Welche Geräte sind beteiligt, wie sind die Netze aufgebaut und wo...
-
MagicFab reacted to micahel jiang's post in the thread when backup it shows "storage is not online" with Like.
Thank you for your reply. Unfortunately, I'm using it as a backup, which is why iSCSI doesn't support it. Updated: I mount the iscsi volume and add directory on this vol and it works fine. I think it's not supposed to be like this way ... -
DDerekG replied to the thread CPU change.You might try upgrading the Intel CPU micro code in Proxmox in case the they are running an older or different versions. This might help: https://community-scripts.github.io/ProxmoxVE/scripts?id=microcode&category=Proxmox+&+Virtualization
-
DDerekG replied to the thread Considering Proxmox use case...doubts..I've had the unit since early Sept, it's fully loaded with 11 drives and using the 10Gbe networking. Running Windows 11 VM and a TrueNAS server. The only times it's been down is when I'm messing around with the configuration, but even that...
-
TTomm replied to the thread Proxmox 8.4 Ubuntu 24.04 server with lightweight desktop.Yes, I forgot. My Aoostar has also the two SFP ports. It is the same model but I got it for 100 euros less and NO TAX for import. Now the prices of RAM are much higher.
-
Kkatti posted the thread Proxmox VE freezes on HPE ProLiant DL580 Gen10 (4× Xeon Platinum 8280L, 1 TB RAM) in Proxmox VE: Installation and configuration.Hello, We are experiencing a critical stability issue when running Proxmox VE on an HPE ProLiant DL580 Gen10 server. The system freezes completely a few minutes after boot, both during installation and after a successful installation. This...
-
DDerekG replied to the thread Issues after upgrading to 6.17.4-1-pve.I can't say that as I have no experience with those controllers and no idea what devices you have connected on each. I would try to disable the Rombar one device at a time. Then look into firmware updates, rolling back the kernel to the earlier...