Latest activity
-
MHallo Freunde, ich habe einen Proxmox host mir einer IP Addresse und wolle daher eine Firewall drauf machen das ich NAT und eine VPN nutzen kann aber irgendwie geht das ganze nicht wenn ich versuche die VPN zu nutzen oder ein NAT denn ich...
-
JJack_Rookie reacted to mariol's post in the thread Backup von 2 PVE Nodes im Homelab - Zweimal PBS sinnvoll? with
Like.
Da gibt es jetzt natürlich mehr Möglichkeiten: Bitte beachte auch die Systemvoraussetzungen [1] Installiere PBS bitte ausschließlich lokal [2], der Einsatz als VM ist nicht vorgesehen. Wenn in Zukunft alle VMs auf einer Node laufen sollten... -
news replied to the thread IO performance below what I'd expect.I use ZFS for example: vdev0: 3x HDD Drive ZFS RaidZ1, vdev1: 3x HDD Drive ZFS RaidZ1 and vdev2: nx SSDs as ZFS special deivce. So a full SSD Special Device is a must with HDDs. So i can read/ write with 2.5 GBit/s Network speed. Please read... -
news replied to the thread IO performance below what I'd expect.Witch ZFS is this ? ZFS Raid0 - Stripe?
-
Ssadpanda posted the thread Bridge can ping, vlan can ping, container cannot in Proxmox VE: Networking and Firewall.Beating my head against the wall for something that should just work. Create new linuxBridge on second NIC (vmbr1) click vlan aware, add allowed vlan(s), give it an ip address. Can ping from from router. assign this bridge to LXC, DHCP and vlan...
-
KKingneutron replied to the thread Disks (zfs / storage / devsd? / etc ).I have never relied on the proxmox gui as a definitive source of information for my disk mapping or usage (except for wearout) so never really saw the problem. https://github.com/kneutron/ansitest/blob/master/drivemap.sh (bash)...
-
KDOLT !!!!!! forgot to enable ping on the gw. working now. dual nic is working now. YEA !!!!!
-
KKingneutron reacted to tlobo's post in the thread High latency and catastrophic write performance with iSCSI + shared LVM with Like.
In case it helps: https://www.dell.com/support/kbdoc/en-us/000124601/me4-md-series-combined-linux-mpio-multipath-conf https://infohub.delltechnologies.com/section-assets/powervault-me4-series-linux Also check if the pools are set to...
-
Kif "tar" segfaults, that would indicate either memory or disk problems usually.. maybe try installing "debsums" and running "debsums -c", and run SMART and memtest (note that absence of failure in those tests doesn't mean there is no HW issue, it...
-
Ssf_zacks posted the thread Backup fails as part of scheduled backup job but successful when manually requested in Proxmox VE: Installation and configuration.I have one vm that fails during the nightly backup job saying it's unable to rename the file "log below" https://forum.proxmox.com/attachments/task-prox-vzdump-2025-12-19t06_00_03z-log.94209/?hash=3d24d8c572666b985b22bd7b7de5d3b3 Everything I...
-
Nnarrateourale replied to the thread ZFS Pool full even though VM limited to 50% of the pools size.One reason could be that the replication feature won't work with native ZFS encryption.
-
Kunfortunately that didnt work heres the output of that also from other checks i have been advised to make we have found that getopt is missing and tar has a segmentation fault. so its quite possible this proxmox has had it
-
Ssurfi2000 posted the thread IO performance below what I'd expect in Proxmox VE: Installation and configuration.I’m experiencing issues with transfer speeds on a large file (40GB). Since the issue even happens when copying between two Debian VMs on the same host, I'm certain it's I/O vs. something like network. The transfer starts quickly and then grinds...
-
KHave you tried an apt update && apt dist-upgrade? Sometimes regular apt upgrade can mess things up if there are disto changes that deal with dependancies.
-
TThomasBo replied to the thread PVE ausgefallen beim PBS Backup, danach Bootprobleme.Hi. Vielen Dank, ziehe ich mir die Tage mal rein und füge das noch hinzu.
-
KKingneutron replied to the thread ZFS Pool full even though VM limited to 50% of the pools size.Just curious, but why are you using LUKS instead of zfs native encryption? Worst case, you might want to put the vdisk on lvm-thin...
-
KKingneutron reacted to aaron's post in the thread ZFS Pool full even though VM limited to 50% of the pools size with Like.
I don't see any mention of how the pool is built. Can you post the output of zpool status? If it is a RAIDZ pool, this might not be too surprising. Background: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#sysadmin_zfs_raid_considerations...
-
KKingneutron reacted to EllerholdAG's post in the thread ZFS Pool full even though VM limited to 50% of the pools size with Like.
Can you run zfs trim? Does this command free space or does it abort instantly, because running trim needs free space to work.
-
KKingneutron replied to the thread Proxmox crashing with "Journal has aborted" message.In all likelihood, the make/model of disk you are using is not good with proxmox. Consumer- and desktop-rated drives are widely known to be a bad mix with a 24/7 hypervisor. https://protectli.com/product/vp3230/ You have 2x m.2 nvme slots, and...
-
BBR6 replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.Here is are results with the args args: -cpu 'host,-hypervisor,kvm=off,+invtsc' https://browser.geekbench.com/v6/cpu/compare/15610159?baseline= 15656424 And https://browser.geekbench.com/v6/cpu/compare/15656424?baseline=15609827