Latest activity

What's new Featured content New posts New profile posts Latest activity
  • J
    janus57 replied to the thread Temporary failure resolving 'deb.debian.org'.
    Hi, If you don't know you should ask the creator of the script. Best regards,
  • F
    Fteuti posted the thread Probleme in Proxmox VM mit fstab in Proxmox VE: Installation and configuration.
    Unter Proxmox 9.1 VM Debian 13.0 wird die NAS-Freigabe, s.u., in fstab beim booten nicht eingehangen. Wenn ich dann: sudo systemctl daemon-reload sudo mount -a eingebe klappt das mounten sofort. Beim nächsten booten tritt das Problem wieder...
  • D
    donhwyo replied to the thread Update change log not working.
    Well it has not fixed itself yet. Seems the time out is about 10 seconds. The cli command takes about 12 to 15 seconds to return. Any idea what file I could edit? Thanks
  • M
    micahel jiang replied to the thread when backup it shows "storage is not online".
    Thank you for your reply. Unfortunately, I'm using it as a backup, which is why iSCSI doesn't support it. Updated: I mount the iscsi volume and add directory on this vol and it works fine. I think it's not supposed to be like this way ...
  • J
    jmaitra replied to the thread Probleme nach Upgrade auf Kernel 6.17.4-1.
    Moin, danke für die schnelle Rückmeldung. Das Journal gibt mir alle Einträge bis gestern 20:24 und dann wieder ab gestern 20:42 -- dazwischen habe ich mehrfach die Maschine über "Stecker ziehen" neu gestartet; insofern wird es wohl schwierig mit...
  • M
    micahel jiang reacted to MagicFab's post in the thread when backup it shows "storage is not online" with Like Like.
    After experiencing all sort of problems with backups over NFS and Samba, I stopped using such storage and only use iSCSI for my setups whenever possible. QNAP’s NFS server isn’t always tuned for heavy concurrent I/O from hypervisors. SMB/CIFS is...
  • G
    _gabriel replied to the thread from Windows 10 to Windows 11, another episode....
    This is another case. Windows disables sata driver storage if not used since last boot. Boot once into Safemode will re-enable sata.
  • D
    donhwyo replied to the thread H700 Perc Controllers.
    Many years ago on my r715. I replaced my h700 with an h200. I think you can do the same on your r710. Think I might have made the drives as raid 0. Don't remember. Don't remember why I had problems with the h700. Maybe something in Proxmox 3. LOL...
  • RolandK
    RolandK reacted to Chris's post in the thread verify after sync/replication ? with Like Like.
    That is because during sync, already known chunks (since 4.1 limited to the same group, see [0]) can be skipped. These might however not be good anymore locally, needing a re-verification. [0]...
  • J
    jt_telrite replied to the thread TrueNAS Storage Plugin.
    My bad, I was using "RAW" formatted disks ....
  • U
    uzumo replied to the thread GPU Passthrough Error.
    If it deviates from the procedures I've outlined, it's no longer my concern.
  • S
    Squid1917 replied to the thread GPU Passthrough Error.
    never mind fixed it by compiling https://github.com/piotrminkina/vendor-reset/tree/issue/kernel-6.12.x-build And adding my gpu id the xxxx:xxxx to the device table. then setting the reset method from bus to device-specific (this has to be done...
  • C
    chrispazz reacted to NAICO's post in the thread HP ProDesk 600 G1 Intel i5-4590: IOMMU? with Like Like.
    Hi everyone! I just wanted to write a guide for those (like myself) trying out GPU passthrough with the HP ProDesk 600 G1 in 2025... I needed to enable VT-d using the "Replicated setup" method (previously mentioned here) in the UEFI/BIOS as the...
  • C
    chrispazz replied to the thread HP ProDesk 600 G1 Intel i5-4590: IOMMU?.
    Super thank you! I will try this later! :) Is it usable only for GPU or for any PCI card?
  • U
    uzumo replied to the thread GPU Passthrough Error.
    Is there any other issue besides that error? It also appears on VMs that are functioning normally. Even if it doesn't work on Linux, That's not something you should be telling me, is it?
  • RolandK
    RolandK replied to the thread verify after sync/replication ?.
    ah, thanks for the pointer, i searched bugzilla but did miss this ticket. but for my curiousity - when newly pulled data chunks are already verified - why do they appear unverified at the sync target when they had not been verified at the source...
  • F
    Foxhunter_de reacted to Falk R.'s post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like Like.
    Sage deinem Bekannten mal, dass es nicht schlecht wäre mehr als 2 Disks zu haben, 3-4 würde ich vorschlagen und auch mal zu checken ob die Backups OK sind. Habe leider einen Fall mit einer kleinen Firma gehabt, da hatten alle 4 Disks nur defekte...
  • F
    Foxhunter_de reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like Like.
    Ja, das ist schon richtig, ein sync-job (ob pull oder push) ist immer nur zwischen PBS möglich. Ich verstehe dich also richtig, dass du deinen ProxmoxVE-Server jede Nacht Richtung drei PBS-Server machen lässt? Sind die alle bei Hetzner (ich...
  • F
    Foxhunter_de reacted to bl1mp's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like Like.
    Der SSH Login für root lässt sich innerhalb des Clusters auch explizit auf die Clusternodes beschränken. Haben wir auch in dem folgenden Repo zur deklarativen PVE-(Cluster)verwaltung (https://github.com/cloudandheat/ansible-role-proxmox-ve) via...
  • F
    Foxhunter_de reacted to speefak's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like Like.
    Man könnte zusätzlich jeden SSH-Login per E-Mail protokollieren. Ich habe das bei mir über eine Postfix-Installation umgesetzt: Systemmails, z. B. von Fail2Ban oder bei SSH-Logins, werden an eine E-Mail-Adresse versendet und von dort an eine...
Show older items
Top Bottom