Latest activity
-
G_gabriel replied to the thread from Windows 10 to Windows 11, another episode....This is another case. Windows disables sata driver storage if not used since last boot. Boot once into Safemode will re-enable sata.
-
Ddonhwyo replied to the thread H700 Perc Controllers.Many years ago on my r715. I replaced my h700 with an h200. I think you can do the same on your r710. Think I might have made the drives as raid 0. Don't remember. Don't remember why I had problems with the h700. Maybe something in Proxmox 3. LOL...
-
That is because during sync, already known chunks (since 4.1 limited to the same group, see [0]) can be skipped. These might however not be good anymore locally, needing a re-verification. [0]... -
Jjt_telrite replied to the thread TrueNAS Storage Plugin.My bad, I was using "RAW" formatted disks ....
-
Uuzumo replied to the thread GPU Passthrough Error.If it deviates from the procedures I've outlined, it's no longer my concern.
-
SSquid1917 replied to the thread GPU Passthrough Error.never mind fixed it by compiling https://github.com/piotrminkina/vendor-reset/tree/issue/kernel-6.12.x-build And adding my gpu id the xxxx:xxxx to the device table. then setting the reset method from bus to device-specific (this has to be done...
-
CHi everyone! I just wanted to write a guide for those (like myself) trying out GPU passthrough with the HP ProDesk 600 G1 in 2025... I needed to enable VT-d using the "Replicated setup" method (previously mentioned here) in the UEFI/BIOS as the...
-
Cchrispazz replied to the thread HP ProDesk 600 G1 Intel i5-4590: IOMMU?.Super thank you! I will try this later! :) Is it usable only for GPU or for any PCI card?
-
Uuzumo replied to the thread GPU Passthrough Error.Is there any other issue besides that error? It also appears on VMs that are functioning normally. Even if it doesn't work on Linux, That's not something you should be telling me, is it?
-
RolandK replied to the thread verify after sync/replication ?.ah, thanks for the pointer, i searched bugzilla but did miss this ticket. but for my curiousity - when newly pulled data chunks are already verified - why do they appear unverified at the sync target when they had not been verified at the source...
-
FFoxhunter_de reacted to Falk R.'s post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with
Like.
Sage deinem Bekannten mal, dass es nicht schlecht wäre mehr als 2 Disks zu haben, 3-4 würde ich vorschlagen und auch mal zu checken ob die Backups OK sind. Habe leider einen Fall mit einer kleinen Firma gehabt, da hatten alle 4 Disks nur defekte... -
FFoxhunter_de reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Ja, das ist schon richtig, ein sync-job (ob pull oder push) ist immer nur zwischen PBS möglich. Ich verstehe dich also richtig, dass du deinen ProxmoxVE-Server jede Nacht Richtung drei PBS-Server machen lässt? Sind die alle bei Hetzner (ich...
-
FFoxhunter_de reacted to bl1mp's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Der SSH Login für root lässt sich innerhalb des Clusters auch explizit auf die Clusternodes beschränken. Haben wir auch in dem folgenden Repo zur deklarativen PVE-(Cluster)verwaltung (https://github.com/cloudandheat/ansible-role-proxmox-ve) via...
-
FFoxhunter_de reacted to speefak's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Man könnte zusätzlich jeden SSH-Login per E-Mail protokollieren. Ich habe das bei mir über eine Postfix-Installation umgesetzt: Systemmails, z. B. von Fail2Ban oder bei SSH-Logins, werden an eine E-Mail-Adresse versendet und von dort an eine...
-
FFoxhunter_de reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Das macht einen Cluster-Kommunikation kaputt, für den Aufbau eines Clusters also root-Login wieder erlauben. Passwort-Login kann und sollte man aber natürlich deaktivieren. Für die Backups rate ich dringend auf pull-backups ( per vpn)...
-
FFoxhunter_de reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Ok du stoppst die Dinger vor der Sicherung? Das mit der dirty-Bitmap bezieht sich auf snapshot Backups. Mit lokal für den initialen PBS meinte ich auch im gleichen Netzwerk/Rechenzentrum, also ein zweiter Server (kann für pbs ja auch ein...
-
Thanks - now that you mentioned it - as this server is foreseen for a subscription I did not add the no-subscription repo, and as the subscription is not yet activated - I am not in a actual state. Will try and test again as soon as the... -
MagicFab replied to the thread when backup it shows "storage is not online".After experiencing all sort of problems with backups over NFS and Samba, I stopped using such storage and only use iSCSI for my setups whenever possible. QNAP’s NFS server isn’t always tuned for heavy concurrent I/O from hypervisors. SMB/CIFS is...
-
EElleni replied to the thread ARM64 Guest on PVE9 Node possible?.Thanks - now that you mentioned it - as this server is foreseen for a subscription I did not add the no-subscription repo, and as the subscription is not yet activated - I am not in a actual state. Will try and test again as soon as the...
-
SSquid1917 replied to the thread GPU Passthrough Error.even in a new pve still same error error writing '1' to '/sys/bus/pci/devices/0000:03:00.0/reset': Inappropriate ioctl for device failed to reset PCI device '0000:03:00.0', but trying to continue as not all devices need a reset