Latest activity
-
Ffschaller replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.Oops, based on your response, I had to edit my post again... I realize that I was fortunate: I only ever had problems with the lock.
-
Bbl1mp reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with
Like.
Das ist laut https://pve.proxmox.com/pve-docs/chapter-vzdump.html schon korrekt, dafür hat man mit den snapshots eine kürzere Downtime und die Konsistenz sollte im Normalfall ausreichen: Leider bin ich dem Mann nur einmal bei einer... -
Bbl1mp reacted to Johannes S's post in the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen? with Like.
Ok du stoppst die Dinger vor der Sicherung? Das mit der dirty-Bitmap bezieht sich auf snapshot Backups. Mit lokal für den initialen PBS meinte ich auch im gleichen Netzwerk/Rechenzentrum, also ein zweiter Server (kann für pbs ja auch ein...
-
Jj.gelissen replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.If it were just a simple lock error and the backups didn’t run, that would be fine. In my case, however, the WorkerVM LUN filled up, the worker process got stuck, and all machines that had an active backup snapshot also crashed. This is damaging...
-
HHaimo replied to the thread [SOLVED] Verteilung ausgehender Mails unklar.Hallo Stoiko, danke für die Antwort, aber ich konnte das mittlerweile klären. In Kürze gesagt: was ich hier schrieb, war schlicht so nicht zutreffend. Insofern nützt es jetzt auch nichts, wenn ich es deutlicher erkläre. Wenn ich es kann, werde...
-
EElleni replied to the thread ARM64 Guest on PVE9 Node possible?.Are you sure? apt install pve-edk2-firmware-aarch64 Package pve-edk2-firmware-aarch64 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
-
Ffschaller replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.First, why not license Proxmox - its really not that expensive and the company behind must pay somehow their bills ;-)... so you get support - although in my case there was no solution... I agree with j.gelissen - I lost days trying to fix the...
-
G_gabriel replied to the thread from Windows 10 to Windows 11, another episode....another reminders : 1/ scsi driver cannot be installed if scsi disk is not attached. 2/ scsi driver cannot be "preinstalled" (excepting the offline injection)
-
Jj.gelissen replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.i kept the worker running.. no issues
-
Ppeter.sc replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.I'm using the root account, because the veeamdep user+sudo was not able to read the network settings, while connecting VBR->PVE. Openend another ticket with Veeam, they said again it's Proxmox issue :-) Is there any side-effects of scheduling the...
-
NNAICO replied to the thread HP ProDesk 600 G1 Intel i5-4590: IOMMU?.Hi everyone! I just wanted to write a guide for those (like myself) trying out GPU passthrough with the HP ProDesk 600 G1 in 2025... I needed to enable VT-d using the "Replicated setup" method (previously mentioned here) in the UEFI/BIOS as the...
-
Jjmaitra replied to the thread Probleme nach Upgrade auf Kernel 6.17.4-1.Maschine ist gebootet. Anschliessend ist sie ohne manuelles Eingreifen ordnungsgemäß wieder hochgefahren. Vielen lieben Dank für die Unterstützung. Eine letzte Frage zum Verständnis: wenn ich den Fehler gefunden habe, warum der Reboot mit dem...
-
Ffschaller replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.Before Veeam 13.0.x I kept the worker running, this was working without any issues - I would suggest you do this. Maybe there is another try: do you use the root Proxmox account with Veeam or another one using sudo to perform the tasks? I would...
-
SSteveITS replied to the thread from Windows 10 to Windows 11, another episode....Apologies if I am over explaining but to be clearer than what I wrote, installing the SCSI driver from ISO is not sufficient, Windows has to use it. Hence the 1 GB disk. But if you’ve done that then your issue is probably something else.
-
bbgeek17 replied to the thread [SOLVED] Cannot connect to GUI.Hi @Adasvejas , welcome to the forum. Start by reducing your DHCP range so that the PVE IP is not within it. That usually helps with access to non-standard ports. you should use the same one that you have on your windows workstation. You can... -
JJohannes S reacted to LnxBil's post in the thread Proxmox 9 Veeam 12.3.2 Worker start failed with Like.
I would just open a case there. They should see how good their product is.
-
RolandK posted the thread verify after sync/replication ? in Proxmox Backup: Installation and configuration.hi, as it seems syncing a datastore to another pbs will "inherit" the verify state of the source snapshot(s) is there a way to unset that verified flag on/after transfer so verify can be run AFTER transfer/sync, so we can verify freshly... -
Ppeter.sc replied to the thread Proxmox 9 Veeam 12.3.2 Worker start failed.I'm facing the same issue with Veeam 13.0.1 and Proxmox 9.1.2. The backup runs correctly for a few days, then the lock issue occurs. Opened ticket at Veeam, they said it's a Proxmox issue, as Veeam is calling Proxmox's API and there is no...
-
Sebi-S reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
See https://pdm.proxmox.com/docs/installation.html#system-requirements It depends also a bit on how many virtual guests (CTs and VMs) are on those 100 nodes, we'll look into adding some more sizing hints for that in the docs. -
Falk R. replied to the thread Ceph Performance Problem trotz guter Ceph Benchmarks.Write Back, schreibt immer erst einmal in den RAM. Der Ceph Benchmark macht immer mehrere Streams. Dein Diskmark nur einen auf einer vDisk. Mehrere VMs performen dann auch schön. Produktiv habe ich nirgends Performanceprobleme, auch nicht bei...