Latest activity
-
Ddrevilish replied to the thread PVE9.x Debian13 LXC /tmp.Just read all of your comments on the bugzilla see above. It's crashed out a couple of my LXCs, this means I need to set my mem limits much higher than ideal for the application.
-
CCallumCreating replied to the thread Proxmox Offline Mirror Pick the Latest Snapshot.Ah thanks for that! I shall keep an eye on releases
-
Rrahman replied to the thread H700 Perc Controllers.You can look at here: https://fohdeesha.com/docs/perc.html I just flashed one of out "H710 D1" RAID cards to IT mode to use ZFS. Only drawback is iDrac does not show current status of the card or disks any more, which is not important for me...
-
Rricotta replied to the thread offline offsite backup via zfs.Keeping my PVE installation clean keeps me from doing that. My setup is a 3-node PVE cluster created and maintained using Ansible, where I try to keep PVE as vanilla as possible and install additional stuff via CT or VM. Benefits: - PVE won't...
-
LLKo replied to the thread Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.No, we don't use bonding in the network path of the PBS.
-
mariol replied to the thread change spice setting by non root account.Thanks for reporting this. I created a bugzilla: https://bugzilla.proxmox.com/show_bug.cgi?id=7168 -
fireon replied to the thread H700 Perc Controllers.Is there any reason not to use a hardware RAID? -
KKrupskij replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Ok, thanks. After updating libpve-common-perl to version 9.1.3 from no-subscription repo there's no issues with adding VLAN TAG to adding VLAN TAG NIC.
-
Ddrevilish replied to the thread PVE9.x Debian13 LXC /tmp.Do you know a way of getting the tmpfs set to limit to the LXC memory limit rather than to the host memory?
-
CCallumCreating posted the thread Proxmox Offline Mirror Pick the Latest Snapshot in Proxmox VE: Installation and configuration.Heyo all, I have setup an offline mirror using the POM documentation and it is working well, however, it i rather annoying that I have to change the date and timestamp each time I wish to do some updates to my enviroment. Is there a way to set...
-
You can keep your existing community licenses which nets you everything you paid for (PVE & possibily PBS) OR you can upgrade your community licenses to basic in order to get a new product (PDM). OR you can go back to vmware and pay 20x. -
Bbawjaws replied to the thread [SOLVED] Pass USB Device to LXC.Hey all, I'm trying to get this working - I'm looking to pass through an external USB drive to an LXC container. I've followed the steps above to create the script and refer to it in the rules, but my question is what do I need to do inside the...
-
Hhuitheme replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..结论：i226V网口没有问题，即便是换了外置USB网口，换了外置雷电网口，反复插拔网线（次数不确定，10次，20次，30次），也会导致PVE彻底失联，除非重启PVE，否则永久失联。 Conclusion: The i226V network port is not the problem. Even after replacing it with an external USB network adapter or an external Thunderbolt network...
-
Now saw that you cross-posted this in various threads, see my reply here and please stop doing such spam-like mass replies. https://forum.proxmox.com/threads/proxmox-datacenter-manager-1-0-stable.177321/page-3#post-825776
-
Other than getting and activating a subscription, no. Edit: For completeness: https://forum.proxmox.com/threads/you-do-not-have-a-valid-subscription-for-this-server.129198/post-565730
-
The nag screen is not a bug but working as designed
-
FFoxhunter_de replied to the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen?.Ja korrekt, meinem Verständnis nach soll das die sicherste Methode für konsistente Backups sein. Korrigiere mich gerne, wenn ich da falsch liege. Ah, perfekt aneinander vorbei geredet, okay :) Danke für den weiteren Input. Mit den externen...
-
cheiss replied to the thread Getting USB Mapped Device Status using API/cli.Hi, you probably are looking for the parent API endpoint: https://pve.proxmox.com/pve-docs/api-viewer/index.html#/cluster/mapping/usb There you can specify the check-node parameter with the node name to check the mapping on, e.g. pvesh get... -
DDerekG replied to the thread Setting up remote access to the Gui - From outside the local network.One of the best / easiest options at the moment is the setup of a Tailscale network, you can run a tailscale node in an LXC and access you entire LAN for anywhere. No requirement to open holes in the firewall https://tailscale.com/
-
EllerholdAG replied to the thread ZFS Pool full even though VM limited to 50% of the pools size.Can you compare the `zfs get all <dataset1>` with the newly created vm's disk that doesnt have these problems? Is there some attribute different between the two (except the obvious ones like used, size, etc)?
