Latest activity
-
Ffaisa7847 replied to the thread Monitoring ceph with Zabbix 6.4.i seem to bew stuck here in zabbix Cannot fetch data: Post "https://zabbix:***@localhost:8003/request?wait=1": dial tcp 127.0.0.1:8003: connect: connection refused. i am using the template ceph by zabbix agent2 and also did install the ceph...
-
news reacted to ThomasBo's post in the thread PVE ausgefallen beim PBS Backup, danach Bootprobleme with
Like.
Ich würde behaupten, TRIM läuft? root@pve01:~# lsblk --discard NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 0B 0B 0 ├─sda1 0 0B... -
Ppsaintemarie replied to the thread Proxmox install on Minisforum ms-01.Ok so that second SSD probably had conflicting partition (or else) that made the MS-01 unsure where to boot it seems. I wiped the disk, reinstalled in the MS-01 and setup as a single ZFS drive and it works fine after several reboots.
-
Sskybolt_1 replied to the thread Using Turnkey Fileserver for storage share - major issues.Ultimately, I ended up creating individual drives for things like Jellyfin and Shinobi and just saving the files to those directly. I'm sure that if I had spent more time I could have gotten things working with ZFS but ultimately decided that for...
-
FFrancisS replied to the thread HA affinity problem (?).Daniel, The command "Ha status" after the test sorry.
-
LnxBil replied to the thread [TUTORIAL] Proxmox VE 9 Live Boot ISO Image.Nice project, especially the iso-built-part and the persistence-part, yet one small remark: this can be archieved by just installing PVE onto an USB disk. I've been using this for decades and there is no magic involved in doing so. It's portable... -
Aavduo replied to the thread Setting up remote access to the Gui - From outside the local network.Hello Mario, Thanks for your message, totally agree with the 2fa. But seems to be struggling to setup wireguard or missing something in the understanding/process as it's not setup as yet so have been looking at headscale and tailscale as well as...
-
Mmaze-m posted the thread Verschlüsselte externe Festplatte an einen LXC-Container weiterreichen in Proxmox VE (Deutsch/German).Hallo zusammen! Ich habe mir einen LXC-Container gebaut, wodrin ich einen NFS-Server aufgesesetzt habe und darüber Shares für Jellyfin, Immich und meine Rechner anbiete. Ich würde nun zunächst einmal die Bilder, Filme und Musik auf eine externe...
-
dakralex replied to the thread HA affinity problem (?).On another note, what pve-ha-manager version is running on the nodes? -
dakralex replied to the thread HA affinity problem (?).If the HA status report from above is the exact same as it was before setting pve1 in maintenance mode (the HA status report's timestamp is later than the syslog), then I cannot reproduce it with this configuration either. Are you sure that the...
-
Ddeimosian replied to the thread Message "No valid subscriptions".Your reply there did not actually address the issues at all, you're just being defensively dismissive. You're asking people to mix production ready PVE and non-production PDM just because they didn't buy a high enough % of higher tier...
-
Bbeisser replied to the thread Seltsames HA Verhalten.aber auch bei 2-node setups das qdevice nicht vergessen, oder der überlebende node kackt auch ab, während du den anderen rebootest ;)
-
TThomasBo replied to the thread PVE ausgefallen beim PBS Backup, danach Bootprobleme.chatgpt hat mir noch paar befehle genannt und kommt zu dem Resultat das Trim wohl absichtlich nicht läuft In der Windows VM habe ich bei den Festplatten allerdings discard aktiviert
-
Falk R. replied to the thread PBS backup how to encryption?.Da clientseitig verschlüsselt wird, kannst du die alten Backups nicht nachträglich verschlüsseln. Einfach abwarten bis die alten Backups raus gealtert sind. -
Bboogaliwoogali replied to the thread AMD Ryzen AI 9 HX 370 Drivers.Hi @adminsblog, I just wanted to say thank you for your guides, they fully worked for my N5 Pro and Proxmox VE 9.1 installation. I can tell it took a lot of work to get this done, and sharing everything with the world is just fantastic so thank...
-
Falk R. replied to the thread Was ist eigentlich der richtige Weg, einen Trunk in Proxmox zu verwenden ohne dedizierte vlan Konfiguration für VMs.SDN geht auch mit einem Host wunderbar. Die Bridge muss VLAN Aware sein und dann einfach eine VLAN Zone anlegen und dann die vNets. Du willst verhindern, dass jemand ein anderes VLAN bei seiner VM einträgt? Dann musst du verbieten, dass diese...
-
TThomasBo replied to the thread PVE ausgefallen beim PBS Backup, danach Bootprobleme.Ich würde behaupten, TRIM läuft? root@pve01:~# lsblk --discard NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 0B 0B 0 ├─sda1 0 0B...
-
mariol replied to the thread Renseignements ssh shell ou console.Welcome to the Proxmox Community :) First please only use English or German in the forum. Proxmox itself uses “xterm.js” by default. This is also possible in the VM. To do this, simply add a serial port via “Hardware → Add” and configure the OS... -
Falk R. replied to the thread Seltsames HA Verhalten.Klingt doch alles Plausibel. Vermutlich hast du die Replikation zwischen Host 1 und 3 aktiv, dann will er die VMs auf den Host verschieben wo die andere Kopie der Disk liegt. Wenn du den Host3 rebooten würdest, wäre der ganze Cluster down, daher...
