Mich wundern die MTU Änderungen, da scheint etwas mit dem Netzwerk nicht zu passen.
Wenn der pvestatd nicht läuft, hast du keinen Status oder Graphen. Starte den Dienst mal.
Kannst du mal den Log-Eintrag etwas vergrößern?
Handelst es sich bei der Node vielleicht um ein Clustermitglied?
Meinst du vielleicht sowas wie das?
Dec 18 13:17:44 pve01 corosync[1341]: [KNET ] link: host: 2 link: 0 is down
Dec 18 13:17:44...
Hi there, just reading about giving a second life to old HDD
I was wondering if this i doable
I have an old HDD, chuwi machine with proxmox, which runs a VM with home assistant and a LXC with Pihole.
Is it a good idea to buy a SATA-to-USB...
Can you provide some additional information?
The configuration of the VM in question:
qm config <VMID>
SDN config:
cat /etc/pve/sdn/zones.cfg
cat /etc/pve/sdn/vnets.cfg
cat /etc/pve/sdn/subnets.cfg
cat /etc/pve/sdn/controllers.cfg
Network...
Die Frage ist ja, wie kann ich das im Detail untersuchen? Gibt es noch andere Logs die ich erstellen kann?
Ich habe aktuell noch eine andere Idee, da wollte ich am Wochenende mal fummeln.
Auf das Board eine M2 SSD einbauen, darauf neu...
Ja schneller schon, aber nicht nachhaltiger.
Wenn du NVMe over TCP nutzt, hast du kein umständliches Multipating mehr, das macht das NVME Protokoll automatisch und die Performance von allen VMs verbessert sich. Daher stelle ich das bei jedem...
I couldn't find any ruleset in internet for proxmox so I started creating my one. can you share your ruleset so I can add them to my model and share it publicly in github for other to use as well?
I have still some kinks and this is early test, I...
Welcome to the Proxmox Community :)
Adding a physical drive via the WebUI is currently only possible for LXC. For VMs, there are a howto in the wiki, which you have probably already found. There is already a feature request for this.
Is there anything in your setup that would prevent you from installing on top of Proxmox VE?
I've been doing this in my homelab for years, and it's also easy to back up to USB.
Das Phänomen habe ich auch schon paarmal gesehen. Die Ursache habe ich nicht gefunden, aber da man eh nicht so oft neu startet, ignoriere ich das.
Ich habe das bisher nur bei Servern gehabt, wo schon einmal PVE installiert war. Eventuell sind da...
FYI, I created an account on this forum just to thank you for saving me some brain injury. I don't like doing it this way either, but at least it works, unlike any variant of urlencode filter in a template string I tried.
You have to install your CA-Certificate from your chain into your client too. On Windows there should be some certmanagement, and on Linux you can place your CA to "/usr/local/share/ca-certificates" and execute update-ca-certificates. I recommend...
Theoretisch kannst du das machen, ich aktiviere den Write Cache bei DB Servern aber nie. Wenn du eine Pure FA hast und keine Lizenzbeschräkungen im Storage dagegen sprechen, benutze lieber NVMe over TCP. Den Unterschied zu iSCSI merkst du bei DB...
after further review, I see forwarding is not enabled in any of my hosts:
root@pve-04:~# sysctl net.ipv4.conf.all.forwarding
net.ipv4.conf.all.forwarding = 0
I can't seen any mention on the documentation to explecitely enable forwarding for...
Well, then I would say that it mainly depends on whether the disks need to be encrypted or not. If not, Proxmox Installer; if so, Debian 13 and then Proxmox on top of it.
Ok, so 6.17.11-4-test-pve completed a round of normal backups without hiccups. Happened in the past as well, so can't yet be sure if it's really fixed. Testing 6.18+416dd649f3aa now.
If both go through the backups without issue, I'll test...