Will try thanks. Not worried about sound as I wont be using the gpu with hdmi physical out. Will be used by remote gaming with sunshine/steam link. So the display will be virtual.
OK - wenn ich Kabelzugang deaktiviere und der traffic über VDSL rausgeht - funktioniert es. Geht er über Kabel geht es nicht. Scheint mir ein Routing oder sonstwas Problem beim VF Kabel provider zu sein. Liegt auf jeden Fall nicht auf der Server...
try this, put a preseed file on a web server with this inside :
### Locale and keyboard (minimal, required)
d-i debian-installer/language string en
d-i debian-installer/country string US
d-i debian-installer/locale string en_US.UTF-8
d-i...
Strange. I wanted to see if I could upload another ISO but didn't want to use anything big (takes a bit of time). So from here: https://www.alpinelinux.org/downloads/
pulled down specifically...
Can you check to see if your pvestatd service in Proxmox is crashing? It's probably that. I have a branch being tested by @curruscanis at the moment to see if it fixes a similar issue.
qemu-server 9.1.3 available on pve-test now should fix this issue. affected VMs do need to be stopped and started (or live-migrated *outside of a node reboot/shutdown!) for the fix to take affect.
Thanks, that will be useful
For now I setup web infrastructure and as @wolframio suggested, I'm using that as shorthand to download and run the script like this
wget router.lan/erl ; sh erl
much easier to type by hand at least !
Workarounds:
On pve server:
adduser yourusernamehere
Use winSCP to upload ISOs to /home/yourusernamehere and move them using PVE node Shell (as root) to /var/lib/vz/template/iso/
OR chown yourusernamehere /var/lib/vz/template/iso/ (you might...
I tried increasing arc from the 3.2gb it was, to 8gb, and I was able to actually complete the upload. I tried also playing with dirty cache up to max_max of 4gb, also increasing txg transfer group from 5second to 10, nothing else helped the up...
Thanks, that will be useful
For now I setup web infrastructure and as @wolframio suggested, I'm using that as shorthand to download and run the script like this
wget router.lan/erl ; sh erl
much easier to type by hand at least !
Then you have an easy guideline. Odds are it just means that if you were allowed to multitenant clients on the same metal with VMWare you can do it with PVE and remain compliant. If you have specific concerns, post them and see if the community...
Well, then I would say that it mainly depends on whether the disks need to be encrypted or not. If not, Proxmox Installer; if so, Debian 13 and then Proxmox on top of it.
Ja sieht so aus - irgendetwas scheint die IP bzw den download auf port 443 zu blocken. Geh ich mit VPN raus geht es. Auf der OPNsense Firewall selber geht es auch.
Muss ich nur noch rausfinden welches "sicherheitsfeature" hier nun zuschlägt.
This is most likely because, as far as I know, Proxmox is not designed for multi-tenancy, and it’s also not really supported in that sense, at least not multi-tenancy as VPS providers like Hetzner, DigitalOcean, or Linode implement it with full...
Danke Thomas für das ausfühliche Feedback. Das war hilfreich und hat einige Blickwinkel eröffnet welche ich so nicht auf dem Schirm hatte, besonders aufgrund der langen Zeit wie ihr schon am Markt seit (ich bin jetzt seit ~ 14 Jahren dabei)...
Okay, ich vermute ich weiß was hier los ist.
Du nutzt hier eine Realtek Karte auf deinem Board (rtl8168), das siehst Du bei deiner ethtool Ausgabe:
driver: r8169
version: 6.17.2-2-pve
firmware-version: rtl8168h-2_0.0.2 02/26/15
Nun gibt es bei...
Wenn Du eh ein neues MB bekommst, dann spar dir das Geld und teste das System nach dem Umbau. Ich gehe davon aus, dass es dann ohne Probleme läuft. Ich habe den Fehler wirklich über Tage gedebuggt und es gibt einfach keinen zufriedenstellenden...