Latest activity
-
NAfter battling to understand these settings myself, and then carefully reading the Postfix documentation over and over again, I conclude these are both very good settings to enable by default. 1. The first setting, "Reject Unknown Clients", does...
-
Nnightchrono replied to the thread PVE nodes communicating with mounted storage (truenas) over cluster network NIC and not primary NIC.Changing the cluster IP's is not very straight forward. Been doing some reading and seeing if this is right: 1. Disable HA Rules 2. Migrate all VM's to primary node for time being 3. Backup /etc/pve/corosync.conf 4. Change the IP of the cluster...
-
fstrankowski replied to the thread GPU Passthrough Error.Please explain the steps how you passed it through to the VM. -
Jjamespanic replied to the thread Not understanding the double-bounce behaviour.I believe I started seeing these when I enabled Verify Receivers under the mail proxy settings.
-
Serror writing '1' to '/sys/bus/pci/devices/0000:03:00.0/reset': Inappropriate ioctl for device failed to reset PCI device '0000:03:00.0', but trying to continue as not all devices need a reset kvm: ../hw/pci/pci.c:1815: pci_irq_handler: Assertion...
-
fstrankowski replied to the thread Frage zu PCI Passthrough und Blacklisting.Ich verstehe noch nicht ganz genau dein Problem? Magste aber bitte mal lspci -vvv stat -vv geben, dann sehen wir auch die Access Control Service Funktionen der Karte, danke :-)
-
Aantiager reacted to fstrankowski's post in the thread [SOLVED] Proxmox 8 keine Gui mehr nur blank Screen nach Update with
Like.
Du kannst mal schauen ob unter /etc/apt/apt.conf.d irgendwas dazu liegt. Das Script beginnt mit DPkg::Post-Invoke ... Update: Gerade mal das Script angeschaut, das referenziert noch eine andere Datei: Also kannst Du sowohl... -
Aantiager reacted to fstrankowski's post in the thread [SOLVED] Proxmox 8 keine Gui mehr nur blank Screen nach Update with Like.
Hattest Du mittels eines NAG-Removal-Scripts dieses Pop-Up entfernt?
-
SSnupydoo replied to the thread Unraid als VM verliert unregelmäßig seinen USB Boot Stick Passthrough.hallo Lucas da kommt nur folgendes in der shell angezeigt: boot: order=usb0 usb0: host=04e8:6300 was das bios angeht ist das neuste eingespielt. Wie gesagt dies ist gerade peer USB per GeräteID zugewiesen. Auch per Port zuweisung wie "USB0 =...
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.I couldn't PM you. Please, check your email instead.
-
Nnightchrono replied to the thread PVE nodes communicating with mounted storage (truenas) over cluster network NIC and not primary NIC.Okay I am setting up a new vlan in my unifi setup now, and will switch the cluster to a different vlan and subnet. Will report back.
-
IiPat1982 posted the thread Frage zu PCI Passthrough und Blacklisting in Proxmox VE (Deutsch/German).Schönen Abend zusammen, ich bin gerade etwas verwundert wegen der Blacklist für Passthrough. Sehe ich den Wald vor lauter Bäume nicht, oder ist es wirklich nicht möglich nur eine Bestimmte Netzwerkkarte durchzureichen? Ich habe 4 x I210 Onboard...
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.I noticed that cloning the VM used this command: /usr/bin/qemu-img convert -p -n -f raw -O raw /dev/proxmox_vg0/base-9000-disk-1 zeroinit:/dev/proxmox_vg0/<VM_LV_NAME> This completed normally, without an error despite the content mismatch when...
-
fstrankowski replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Die Datei /etc/network/interfaces ist eine Konfigurationsdatei, die kannst Du nicht ausführen, lediglich ausgeben. Z.b. mit dem Programmcat cat /etc/network/interfaces Das Tool "ethtool" erwartet Parameter bei der Ausführung, das teilt dir das...
-
bbgeek17 replied to the thread PVE nodes communicating with mounted storage (truenas) over cluster network NIC and not primary NIC.You should not have all devices on the same subnet. Your cluster network should be on a different subnet. Note that none of this is PVE specific, but rather basic Linux Networking. Cheers PS I initially misread and thought you have more than 2... -
Nnightchrono replied to the thread PVE nodes communicating with mounted storage (truenas) over cluster network NIC and not primary NIC.Sorry was struggling with table formatting an accidentally posted. It is not intuitive to type an additional line after a table, but I digress. will edit the previous post with the other information, just posting quick so you know I didn't...
-
Nnightchrono replied to the thread PVE nodes communicating with mounted storage (truenas) over cluster network NIC and not primary NIC.Network is 192.168.50.0/24. All devices in question are on the same subnet. My nodes are as follows: Node NameManagement IPCluster IP PVX192.168.50.100192.168.50.120 PVX2192.168.50.104192.168.50.124 PVX3192.168.50.105192.168.50.125 I...
-
-
Ddavidmei replied to the thread [SOLVED] Lan Zugriff bricht einfach ab./etc/network/interfaces -> also da habe ich premission denied. Bin als root eingeloggt. Bei "ethtool" sagt er ist kein Befehl den er kennt. Da weißich nicht was ihr genau braucht:
-
-
Ccomplexplaster27 replied to the thread OpenFabric: Could not find two T0 routers log spam after migration? (And VM access question).Thanks @ggoller
-
Ccomplexplaster27 replied to the thread Windows VM stuck on boot with CPU type set to host.I have also done that but eventually the host type will end up locked up on the boot menu like it does. Since that thread i've switched ALL my VMs over to the virtualised CPU and instead of host and haven't had any issues with the boot menu...
