Latest activity
-
SThanks for the reply! Interesting that the web-UI makes it appear as though it is properly recognizing the VLAN tag but not adding it to the config. Regardless, I've added "vlan-id 27" to "iface vlan542 inet static" and ran 'ifreload -a' and...
-
Vviadatecnologia reacted to Kingneutron's post in the thread Slow write performance in Rocky/RHEL VMs with
Like.
Have you tried cache=writeback ? -
Fonly checking: is it also formatted like this. or better for 4kN? for example: nvme id-ns /dev/nvmeXn0 -H | grep LBA nvme format /dev/nvmeXn0 -l 3
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..But for now, no matter what I try, Hyper-V often delivers about 20%~25% better random I/O performance than Proxmox, and this has a direct impact on my application’s database response times. And, believe me, I tried EVERYTHING...
-
DDennigma replied to the thread Migrating with Conntrack doesn't work after Updating to 9.0.5.Dear Fiona, there seems to be a new bug in the recent update pve-manager update 9.1.2. It's not the same as my initial post, but migrating when using the reboot/shutdown button of any node inside of a cluster leads to this behaviour, when...
-
SSnupydoo replied to the thread Unraid als VM verliert unregelmäßig seinen USB Boot Stick Passthrough.Hallo Lucas Ja hab ich auch probiert und auch per nano in der shell durchgerechnet in der vm Config ... obwohl sowieso dann immer das gleiche bei raus kommt. Der Stick ist einer der empfohlenen Sticks von Unraid. Klar hab ich noch welche aber...
-
UdoB reacted to SteveITS's post in the thread if reboot is triggered pve node goes away too fast before ha migration is finished with Like.
Another way to migrate all VMs (and have them migrate back to the same server) is to enable maintenance mode. On any server run: ha-manager crm-command node-maintenance enable pve1 (wait for migration, then reboot) ha-manager crm-command... -
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..Thanks, @ucholak! I wasn't aware of this command. It appears it's not: # nvme list Node Generic SN Model Namespace Usage Format...
-
CCiber replied to the thread Ceph librbd vs krbd.Switched to KRBD and the difference is massive lol. Here's the before and after, writeback cache was enabled for both runs.
-
-
shanreich replied to the thread VLAN and SDN struggles.Are you sure everything is set up properly on OpenWRT? If you see a TCP RST for some connections on the router (but not on the PVE host), then this might be an indicator that a firewall rejects packets. If you see nothing via tcpdump on the PVE... -
fiona replied to the thread QEMU VM startup timeout.Currently, it's only possible when starting via CLI. The feature request I referenced is still open, i.e. not yet implemented. -
SSteveITS replied to the thread if reboot is triggered pve node goes away too fast before ha migration is finished.Another way to migrate all VMs (and have them migrate back to the same server) is to enable maintenance mode. On any server run: ha-manager crm-command node-maintenance enable pve1 (wait for migration, then reboot) ha-manager crm-command...
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..I didn't even try. According to Proxmox VE documentation: The VirtIO Block controller, often just called VirtIO or virtio-blk, is an older type of paravirtualized controller. It has been superseded by the VirtIO SCSI Controller, in terms of...
-
fiona replied to the thread Migrating with Conntrack doesn't work after Updating to 9.0.5.Hi @woma , your issue sounds a bit different. HA does not currently migrate with conntrack state. The error message you get is the same as in the following bug report: https://bugzilla.proxmox.com/show_bug.cgi?id=7092 There, the migration still...
-
CarstenMartens replied to the thread ACME Plugin - Hetzner "DNS Console is moving to the Hetzner Console".That wasn't the intention – my English isn't as good as it should be after nine years of school – but it's simply time-consuming when multiple systems have to be manually updated instead of using patches. And if we switch the Hetzner DNS, we'll... -
bbgeek17 replied to the thread migration plan from vsan cluster to proxmox.Looking at the man page of the QM: qm import <vmid> <source> --storage <string> [OPTIONS] Import a foreign virtual guest from a supported import source, such as an ESXi storage. <vmid>: <integer> (100 - 999999999) The... -
Jjrl_1644 replied to the thread Anybody running PBS on UGreen units?.Another update. My issue turned out to be Orico J-10 NVME drives. Not a single hang in months since replacing the drives. Although the microcode update did help,.
-
DDer Harry replied to the thread ACME Plugin - Hetzner "DNS Console is moving to the Hetzner Console".No blaming. Also being a developer - their #1 Priority (that what makes money) was on the Proxmox Datacenter Manager. I just kindly asked asked about the plans to update acme.sh in the bugzilla ticket. At some time I just post a bash script here...
-
fiona replied to the thread KRBD 0 Ceph prevents VMs from starting.[pid 1373949] openat(AT_FDCWD, "/etc/ceph/ceph-metal.client.admin.keyring", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) [pid 1373949] openat(AT_FDCWD, "/etc/ceph/ceph-metal.keyring", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file...
-
Naja, NFS ist so simpel, dass es praktisch ein offenes Scheunentor ist, Goldstandard würde ich das nicht nennen: https://talks.mrmcd.net/2024/talk/7RR38D/ Außer man konfiguriert Kerberos, aber dann ist es nicht mehr simpel. Nicht falsch...
