Latest activity
-
DHallo Zusammen, ich habe einen Proxmox nun installiert. Leider habe ich das Problem, dass der Netzwerkzugriff nach ein paar Stunden wie aus dem nichts abbricht. Mainboard / CPU etc. läuft noch und wenn ich einenBildschirm ranhänge zeigt die...
-
11ONE replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..In my home lab, I renamed the network interfaces using: pve-network-interface-pinning generate --prefix eth After that, I deleted the originally generated files from /usr/local/lib/systemd/network/ (in my case the file was named, for example...
-
Aalexskysilk replied to the thread Confused on bonds, interfaces...this doesn't work like you think. In effect, this creates a loop which will either have one interface blocked by STP, or the whole switch would be shut down. In other words, this is a poor substitute for an active/passive bond. That is a more...
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.You would have to show the entire configuration, what exactly you changed and what you added. Generally, Windows itself will work without any problems, the only issue is with restarting. The question is also why you are using AMDGopDriver.rom...
-
-
JHi, I didn't see this anywhere in docs or search. When I set up the s3 datastore for s3 it asks for local cache. I tried using my OS disk but it started using too much space. I'm setting it up again to use a new folder in my ZFS pool. I was...
-
Jjuju01 replied to the thread Cleaning up previous backups.That helped. I unmounted the network share, restarted the vm, then used the gdu tool to drill down and delete everything under /mnt (16 GB of data found there ), then remounted the network share. All good. thx to you guys. @Impact @Onslow
-
Ccelemine1gig replied to the thread Problems with PCIe passthrough with two identical devices.My answer was not directed at any one person in particular. So, it is completely fair to say, that you cannot do this. Main point is: Someone will have to try it. My suggestion is far from being proven. Only way however, in order to find out...
-
66equj5 reacted to maxim.webster's post in the thread Is there a way to backup the PVE Host to the Proxmox Backup Server (PBS)? with
Like.
Here's the script that I am currently using, it focusses on backing up the host configuration, not the payload (VMs, CT, etc.). #!/bin/bash if [ -f /etc/pve/local/pve-backup.env ] ; then source /etc/pve/local/pve-backup.env else... -
Ggasherbrum replied to the thread vm migration error on node reboot.this just began occurring with my setup on 9.1.2
-
Pphdb44 posted the thread SSD NVMe Suddenly no more recognized in Proxmox VE: Installation and configuration.Hello, I'm encountering a rather unusual problem. My setup : Ryzen 7 5700X, 64GB RAM, a 4TB Samsung 990 Pro NVMe SSD, two 120GB SSDs (one for ISOs and one for Snap), two 3TB HDDs (for backups), and a 650W power supply. My VMs : 45 VMs, 9 of...
-
OOnslow replied to the thread Cleaning up previous backups.@juju01 umount /mnt/unaspro and check in /mnt whether your old backups are there.
-
SSchorschSK replied to the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025.Ok this sounds promising. Did you try out 6.18 or did you disable nesting and enable avic? Intel or AMD cpu? I tried enabling avic but might have missed the part with disabling nesting so gonna try it again when time allows.
-
WWolfLink115 replied to the thread Host system crash after VM power off/Reboot.I haven't tried using a Linux VM instead of a Windows VM, though that would probs be a good thing to try. The issue with that is I don't exactly have enough space to do that at the moment, but I will test that when I get the ability to. I know...
-
Sspetrillo replied to the thread Help with Proxmox Trunk Port Setup – Letting OPNsense Handle VLANs,DHCP etc.I have 3 NICs on my server, 2 10g NICs and the 1g onboard NIC. The onboard NIC will be dedicated to OPNsense WAN directly. The two 10g NICs will be vlan aware and will handle all the vlans in my setup, as well as provide mgmt of the PVE server. I...
-
Rredjohn posted the thread Proxmox 9 - Bridge - IPv6 - LXC Container problem! in Proxmox VE: Networking and Firewall.Hello everyone, I moved my server to new hardware. With new IPv6 IP's. Now my Gateway looks like this: fe80:0000:0000:0000:0000:0000:0000:0001 My Proxmox Host can use IPv6 and I can ping outside, fine! :-) But my LXC Container can not use...
-
JJack_Rookie posted the thread [SOLVED] TASK ERROR: no such logical volume XXX/YYY in Proxmox VE (Deutsch/German).Haben den o.g. Fehler beim Löschen eines LXC. Ursache war eine defekte Platte. Lösung habe ich in diesem Beitrag gefunden. Kann eine VM nicht löschen... (Die Überschrift zum Beitrag ist irreführend, daher diesen hier mit entsprechender...
-
IIWIOS replied to the thread Zip file corrupted when I try to download theme from Proxmox Server.it's possible, a corrupted backup be at the origin of the problem ?
-
JJack_Rookie replied to the thread Kann eine VM nicht löschen .....Ich hatte einen vergleichbaren Fehler, nachdem eine Platte abgeraucht ist. TASK ERROR: no such logical volume XXX/YYY Die Lösung lag tatsächlich darin, die "storage.cfg" anzupassen und den fehlenden Eintrag zu entfernen. nano...
-
Nneobiker replied to the thread ZFS SSD Migration Consumer zu Server SSD.Also: Ich habe die VMs jetzt auf den neuen SSDs per PBS auf einen neuen PVE9 gezogen, auf einem Ersatz-Rechner. Da laufen die erstmal produktiv. Den alten Server (PVE8) habe ich mittels Proxmox ISO im Debugmodus gebootet: CTRL-D bringt einen...
-
JEine Möglichkeit wäre, die Referenz zu dieser Platte zuerst manuell aus der Konfigurationsdatei zu entfernen bzw. Sie auskommentieren nano /etc/pve/qemu-server/902.conf
