Latest activity
-
aaron replied to the thread Windows Guest memory utilization problem on PVE 9.0.x.Only once you get more detailed infos back via `info balloon` in the Monitor menu, can Proxmox VE itself show the inside view of the VM. So if the BalloonService is up and running, the Ballooning Device enabled, things should be good. Except... -
MMarceldrzal replied to the thread Linux Rechner weiß nicht was das ist?.Schon ne Weile her Denke mal ich
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff - DNS Problem?.1) Der Anzeige von FBen kann man überhaupt nicht trauen. 2) Klingt nach dem berüchtigten e1000-Bug. Dsbzgl. findest du einen ganzen Sack von Beiträgen.
-
SSteveITS replied to the thread Proxmox Cluster.No, because it's off. HA has a bit of a delay to be sure the node is really offline and not a temporary communication failure, so it isn't ever running twice. I don't know if that timeout can be adjusted. HA policy can be configured to...
-
Sstuartthebruce replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Has the hypothesis been tested that this is not a kernel bug, but rather a problem in the Proxmox Rust data transfer application that has been triggered by a change in the kernel? FWIW, I also have been unable to hang PVE to PBS server network...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....Being a german, I know that german saying... As you saw, the actual real-world results with a volblocksize of 128k do not show what the theory says. On a side note, I have a Proxmox Backup Server VM with a 2TByte data disk on the same raidz2...
-
SSteveITS replied to the thread Windows Guest memory utilization problem on PVE 9.0.x.Generally a hypervisor sees (simplified) the max memory ever used by the VM because it was allocated there. The VM can free memory by closing programs but that doesn't change the host's perspective because it was already allocated to the VM...
-
shanreich replied to the thread SDN broken after using pve-network-interface-pinning tool.I think it might be related to the change to a vlan-aware bridge, as that creates the VLAN on top of the bridge interface, instead of the physical interface. You have to be careful, since if this is the bug I linked (which I highly suspect). Then... -
Ff4242 replied to the thread What Permissions are needed on the PVE/PBS-Remotes for a Datacenter Manager User?.Hi, I think there is something wrong with the PDM security model. Instead of using a generic token with full permission on PVE side, PDM should forward the user authentication to PVE (retreive some kind of temporary token with user's...
-
Ooester replied to the thread Why does pveproxy still think I have a second node?.Thanks, yes this was the procedure I followed, and I did restart these process, and rebooted as well.
-
bbgeek17 replied to the thread migration plan from vsan cluster to proxmox.Hi @Xavier Droniou , can you provide exact commands with subsequent output that you executed? As well as your storage configuration: cat /etc/pve/storage.cfg To answer your question: Yes, you can can import file from locally mounted path... -
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.Hmm, sounds very possible, though it's been fine for [edit: 7] months before the pinning. Maybe pinning changes the timing like the bond speculation in the report? I didn't pull logs or anything, since, like they report, reapplying the network...
-
cheiss reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
No, we do not provide any such scripts for PVE either and strongly recommend against installing any third party software, especially without carefully vetting it. See the FAQ for how to get rid of these notices the legitimate way... -
Ppatrick- replied to the thread Job ID wont show up in notification rules.Amazing! Thank you so much for helping to fix this! You're right, it was indeed a push sync job that I was trying to notify on. This fix will be a big help in sync monitoring and alerting! Thanks again
-
EEduardo Taboada reacted to chrsgrhmgrhm's post in the thread [SOLVED] PVE backups to PBS running SUPER SLOW! with Like.
I believe I have solved this, although I cannot exactly pinpoint the issue. I backed everything up to PBS, then changed my pool from 14x2TB in RAID10 to 4x2TB (LXCPOOL) and 10x2TB (VMPOOL) in RAID 10. I had an an underperforming SSD, so I...
-
jsterr replied to the thread Proxmox Datacenter Manager 1.0 (stable).You can build a custom-view without the notification information but to be honest, Proxmox should include this in every view by default just to encourage people to buy a subscription! -
jsterr reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
No, we do not provide any such scripts for PVE either and strongly recommend against installing any third party software, especially without carefully vetting it. See the FAQ for how to get rid of these notices the legitimate way...
-
Cchrsgrhmgrhm replied to the thread [SOLVED] PVE backups to PBS running SUPER SLOW!.I believe I have solved this, although I cannot exactly pinpoint the issue. I backed everything up to PBS, then changed my pool from 14x2TB in RAID10 to 4x2TB (LXCPOOL) and 10x2TB (VMPOOL) in RAID 10. I had an an underperforming SSD, so I...
-
Mmikeyvanderworp posted the thread SpamAssassin changes not picked up in Mail Gateway: Installation and configuration.Hi, I'm trying to get a disclaimer text going for URLs that do not match sender e-mail domain. I've added the header: add_header all X-SA-URI-Domains _URIDOMAINS_ In my custom.cf. On a --lint action it detects it successfully...
-
SSwifty.hu replied to the thread Bind9 Installation fails using Proxmox 9.0.Hello atatury, Have you checked if you're affected by the apparmour problem? sudo aa-status | grep named Cheers, Swifty