Latest activity
-
Ggseeley reacted to Dieter Toews's post in the thread [SOLVED] Proxmox installer not seeing my sas drives with
Like.
Drive Size no longer reports 0!!!!! after the failure of unbuntu17.x and while waiting for windoz to download i started reviewing the output of smartctl and saw this... Logical block size: 520 bytes that fired a neuron that had been... -
Ttorroe replied to the thread Proxmox Backup Server (PBS) 4.1.0 causing S3 InternalError (500) during Garbage Collection (GC).Thank you very much for the fast and incredibly precise diagnosis! The confirmed information about the change in the GC logic in PBS 4.1.0 is extremely valuable. I have already forwarded the API incompatibility diagnosis (specifically the issue...
-
DDerekG replied to the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required.Sorry it's taken so long, it's not easy to take the TrueNAS down for diagnosis here. I think there has been an update to kernel 6.17.2-2 since my last update. And this is the log from VM boot: Dec 14 17:12:49 pve-5 pvestatd[2344]: status...
-
Rricotta posted the thread offline offsite backup via zfs in Proxmox Backup: Installation and configuration.Hello, I couldn't find any answer that would satisfy me, so had to create this thread. Before I can afford an offsite server, I'd like to implement a poor man's offsite backup by copying data to separate HDDs and dropping those to family...
-
Ttechsolo12 reacted to lucius_the's post in the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk with Like.
Well, I'll just post another update since I already spent many hours on this. Might help maybe. The procedure (to get windows fullly up to date and have Event ID 1801 cleared) there are actually many steps, both on the UEFI side and inside...
-
DDerekG replied to the thread Minisforum UM790: USB4/Thunderbolt Passthrough.How did you get thunderolt to authorize, whatever 'bolt' command I use, returns nothing, and I never get the device file /sys/bus/thunderbolt/devices populated. Can you post you modules and blacklists.?
-
Ttbomb456 replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.U UEFI
-
Nneobiker replied to the thread Wiederhestellung von zweiter Festplatte.Du könntest auch von der alten Disk das alte System booten, oder? Dann kannst Du ein Backup erstellen, auf die neue Disk z.B. die HA-Konfig sichern, oder halt das komplette HA. Dann kannst Du Dir überlegen, ob / wie Du ein neues System auf der...
-
Nneobiker replied to the thread System hängt im Bootvorgang.hast Du auf einen Timeout gewartet? Normalerweise landet debian ja in einem read-only login der initrd, da kann man dann meist das problem fixen. In Deinem Screenshot sieht man leider nicht was die ganzen 27 Sekunden gedauert hat
-
HHallo, vor ein paar Tagen fuhr mein Proxmox-Server selbständig runter, während ich darauf zugriff. Nach einem Neustart bleibt das System nun im "initial ramdisk" -Vorgang hängen. Ein Versuch Grub neu zu installieren löste das Problem nicht. Auch...
-
-
bbgeek17 replied to the thread PVE9 : iscsi and snapshots as volume chain with imported VMs.Hi @Wodel , you should provide the following information: - what does "imported" mean in your particular situation? - what is the resulting VM configuration that does not work? - what is the exact storage configuration? Outputs from the... -
KKoto41 replied to the thread [SOLVED] Récupération VM.Thank you for your help, it's working again by doing : apt install --reinstall pve-manager pve-cluster pve-container pve-ha-manager pve-firewall libpve-common-perl libpve-access-control libpve-guest-common-perl libpve-storage-perl...
-
Gglockmane replied to the thread Minisforum UM790: USB4/Thunderbolt Passthrough.Hi Derek, I solved it with installing and authorizing Thunderbold on Proxmox and then passing through the gpu to the vm (not the thunderbolt controller).
-
Wwaltar reacted to JamieColors's post in the thread [TUTORIAL] Proxmox install on Optane PMEM 100 with Like.
EDIT: GitHub repo for WebUI patch to support PMEM and better installation guide For anyone wanting to do the same, this worked in the end: Open Proxmox Installer as Debug First shell -> exit nano /usr/share/perl5/Proxmox/Sys/Block.pm CTRL + F...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....Time to conduct an experiment... Just one more question: What would you expect if the volblocksize was larger, say 128k? Would storage efficiency rise or sink from the 66% you expect?
-
powersupport replied to the thread Proxmox Backup Server (PBS) 4.1.0 causing S3 InternalError (500) during Garbage Collection (GC).This problem started after upgrading Proxmox Backup Server to version 4.1.0. While backups and verification jobs continue to run successfully, the Garbage Collection (GC) task fails during the “sweep unused chunks” phase due to an error returned... -
JJamieColors replied to the thread [TUTORIAL] Proxmox install on Optane PMEM 100.EDIT: GitHub repo for WebUI patch to support PMEM and better installation guide For anyone wanting to do the same, this worked in the end: Open Proxmox Installer as Debug First shell -> exit nano /usr/share/perl5/Proxmox/Sys/Block.pm CTRL + F...
-
Sschulzemic replied to the thread Hard disk spins up every 30 minutes.I ended up reducing the polling frequency in /etc/default/smartmontools, that seems to do the trick.
-
EErtu replied to the thread CPU types, word of caution.Hi, I'am really lost here :rolleyes: I have a host r740 with SKylake cpu Intel Gold 6138 What type of cpu should i select to run Windows Server 2025 correctly ? Should i add this line too ? options kvm-intel nested=N to the host ? Thanks Here...
-
-
DDerekG replied to the thread Minisforum UM790: USB4/Thunderbolt Passthrough.Hi glockmane, Did you ever manage to resolve this issue? I'm stuck on the passthrough of a Thunderbolt5 egpu dock to and AMD based system too.
