Ja, aber nur per Hand und über das Rettungssystem und anschließend Umbennenung des zfs rpool zu zfs npool, o.ä.
Es gibt aber keine Anleitung dazu vom mir.
I'm in the same situation. In my case, it seems that smart is the culprit.
systemctl stop smartmontools appears to have stopped it. I think it should be possible to change the configuration in /etc/smartd.conf to improve it, potentially some...
Hat jemand Erfahrung mit zpool export rpool auf proxmmox ?
Geht sowas überhaupt?
Da würde ich ja das aktive zpool mit ROOT exportieren ...
Vermutlich geht das nur mit Daten-Pools, aber nicht mit dem ROOT, oder?
Die Idee dahinter:
-> Einbau der...
Thx for reply!
My PM host and VM both support the "constant_tsc" flag. I have no problem with time mgt as refered to NTP.
I will dig deeper into the problem. Maybe I have overlooked some setting.
EDIT:
I saw that my other VM's use tsc as the...
Hello everyone,
we experienced very similar behavior to what is described in this thread – with the difference that in our case the Veeam PVE worker VM could no longer be stopped.
The issue occurred during a Veeam 12.3.2 backup run on Proxmox...
UdoBs Weg ist der sicherste, geht aber auch ohne zusätzliche SSD. einfach die erste SSD tauschen, resilver laufen lassen, dann die zweite SSD und anschließend die LVMs vergrößern. (edit: autoexpand für den Pool muss auf on sein)
Ich habs fürs...
Ich habe einfach zunächst die dritte SSD wie in https://pve.proxmox.com/pve-docs/pve-admin-guide.html#sysadmin_zfs_change_failed_dev beschrieben angeklebt.
Nach diesem ersten Zwischenschritt (vor dem Wiederholen mit dem vierten Device) hat man...
If you can request a BIOS update from the vendor and obtain one that supports the new components, that should work.
Since new BIOS updates to support new hardware on end-of-support products are unlikely to be provided, purchasing a new...
I only provided settings to remove Code 43, so it likely won't function properly on its own.
* Your configuration does not meet the prerequisites for implementing the steps he outlined (such as blacklisting amdgpu and gop not being set), so I...
So you think the system is working doing various jobs at that time pulling a little harder on the psu which is cutting out. Would explain why it's doing it at the same time every day ? I have backup power which also covers the unifi controller...
I'm in the same situation. In my case, it seems that smart is the culprit.
systemctl stop smartmontools appears to have stopped it. I think it should be possible to change the configuration in /etc/smartd.conf to improve it, potentially some...
UdoBs Weg ist der sicherste, geht aber auch ohne zusätzliche SSD. einfach die erste SSD tauschen, resilver laufen lassen, dann die zweite SSD und anschließend die LVMs vergrößern. (edit: autoexpand für den Pool muss auf on sein)
Ich habs fürs...
It's after this that the system shuts down. If the system crashed I'm guessing it would be in the log ? But then would it not show a shutdown sequence if it was doing through a command ?
Yeah, system logs are hard to read most of the time. There is no error listed.
Maybe there has been a non-logged event? For example a power fail would not get logged, because... there is no power.