Latest activity
-
J@Falk R., absolut korrekt. Der Bezug über einen "örtlichen Händler" spricht fast immer für OEM/SB-Ware, die keinen Zugang zum M365 Admin Center (ehemals VLSC) und somit keine KMS-Host-Keys beinhaltet. @Martin_Abr, ergänzend dazu: Da dein...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Thank you for the help, I will try to figure it out and provide an update if I can reach some improvement.
-
CChamonix73 replied to the thread Problem importing zfs pool.Update!: The harddrives works when plugged into another instance of PBS on another PC. Strange us f**k if you ask me. Tried changing ports and cables on the original PBS PC but that does not help.
-
EEduardo Taboada replied to the thread [SOLVED] Ceph Cluster vlan migration help requested.This thread may help you https://forum.proxmox.com/threads/migrating-proxmox-ha-cluster-with-ceph-to-new-ip-subnet.165537/
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.As suspected, killing just the stalled backup in PBS leads to the rest of the backups working successfully (allegedly until the next stall hits, which didn't happen in this run) edit: I'm starting a git bisect session now on linus' git tree...
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Is a good practice to separate Ceph data traffic in another interface or almost another VLAN and use 10 Gb or more for this traffic, You should keep in mind that modern SSDs have a very high transfer rate and need a network to match this...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.I have only one nic per node, and one linux bridge configured. I did not create a an extra VLAN or sth. on proxmox. The Network attached itself provides several VLANs as the hostes Container and VMs are located in several VLANs.
-
Jj.gelissen replied to the thread Write Back (safe) + Pure Storage – sinnvoll für produktive Windows-Server?.Das ist aktuell bei mir aus weil bei der Migration ist das im Standard immer aus. Kann man das nachträglich aktivieren? Ist das gefährlich wenn es aus ist? Weil du geschrieben hast essenziell
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.To know which is the cause of this problem: Do you have a separate VLAN or network for Ceph? Check the network interfaces for errors, and also the smart values of disks
-
Sssmsp replied to the thread Proxmox 8.0.4 doesn't see: ASUS XG-C100C 10G Network Adapter PCI-E x4 Card.This was a lost cause; the manufacturer doesn't make the Debian driver in a package you have to compile your own. I wound up using this, it worked perfectly plug and play, basically any card with an Intel X540 controller will 100% work...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Hi, by using that command I can fully deaktivate that check, if done, yes it is back to green. But if I activate it again, the warnings are back. So I can only decide to "deactivate" that check? By that I would loose some early warning? Would'nt...
-
JJamieColors posted the thread [TUTORIAL] Proxmox install on Optane PMEM 100 in Proxmox VE: Installation and configuration.Hello! First off, I know this isn't "officially supported" or such... but I think it's worth a try here. I've been trying to install Proxmox on Optane PMEM 100's for a while now and well the installation is quite simple actually by just adding }...
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Is not a critical error, blueStore has recovered the failure, and the cause can be a puntual problem with the network, or some hardware element (controller, disk) but it appears to be for a low response of these OSD. To remove the warning: ceph...
-
BBluemeus replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Today i tried again, after i freed the space, rebooted everything and startet a migration by PDM but without success. The error is still the same and i have still no idea, why it is not possible to migrate the storage. 2025-12-12 19:35:21...
-
SSteveITS replied to the thread 40 node prod cluster restarts when joining a new node or removing..Based on my experience with a small cluster when we were getting started, we had no issues doing it on a live system and following the directions. We added another link then as a second step changed the order as I recall, so the new one was...
-
Ttkw posted the thread PBS Sync stalls after recent v4.1.0 upgrades in Proxmox Backup: Installation and configuration.I've got PBS VMs on each of my two PVE hosts and the hosts backup to the other host's PBS VM as part of my home lab. Once a day, at different times, each PBS VM does a pull sync of the content from the other PVE host as an extra copy. This...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Hi @Eduardo Taboada I check your link, but when I do execute the command to show the crash id's I do not get any response. It's emty. So maybe no "crash" yet :( Linux prx1 6.17.2-2-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-2 (2025-11-26T12:33Z)...
-
Aaomer786 replied to the thread 40 node prod cluster restarts when joining a new node or removing..@SteveITS Thank You! Currently even if we try to remove a node the entire cluster reboots. Perhaps,we need to setup the new link before we can proceed. I wonder if adding a new link in a running cluster can cause the cluster needing or causes to...
-
PPouch6867 posted the thread [SOLVED] Ceph Cluster vlan migration help requested in Proxmox VE: Installation and configuration.EDIT: SOLVED! https://forum.proxmox.com/threads/ceph-cluster-vlan-migration-help-requested.177942/post-824528 So I've been trying to move the ceph network to it's own dedicated vlan11 from where I initially stood this up on vlan1. Every time I...
-
SSteveITS replied to the thread 40 node prod cluster restarts when joining a new node or removing..@aomer786 There have been various posts here about max cluster size, like the one linked above. The concern with corosync is latency not bandwidth. So if enough milliseconds go by the node is considered to not be responding. A NIC can't send...
